SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: 74 SleekCraft on June 07, 2015, 11:51:50 AM
-
Can I change the rope seal with the pump and motor still in the boat?
Sent from my iPhone using SoCal Jet Boats
-
Yes. But be prepared to curse...... A lot.
-
Yes. But be prepared to curse...... A lot.
i do that anytime I work on a boat lol. What do I need to get the old seal out?
Sent from my iPhone using SoCal Jet Boats
-
i do that anytime I work on a boat lol. What do I need to get the old seal out?
Sent from my iPhone using SoCal Jet Boats
I use a Lysle tool Sneaky Pete. Looks like a little corkscrew.
GT
-
I use a Lysle tool Sneaky Pete. Looks like a little corkscrew.
GT
is that the only seal that's there?
Sent from my iPhone using SoCal Jet Boats
-
is that the only seal that's there?
Sent from my iPhone using SoCal Jet Boats
You mean on the other side of the packing glands, yes. There are several individual ropes.
Let me know what new swear words you come up with.
GT
-
You mean on the other side of the packing glands, yes. There are several individual ropes.
Let me know what new swear words you come up with.
GT
the kit comes with 4 rope seals. That sound right? I will for sure let you know what new i come up with in the process of changing it lol.
Sent from my iPhone using SoCal Jet Boats
-
the kit comes with 4 rope seals. That sound right? I will for sure let you know what new i come up with in the process of changing it lol.
Sent from my iPhone using SoCal Jet Boats
Yes. Be sure to get everything out. I clean the shafts with a WD40 like product (Amsoil MP Spray) and Scotch Brite pads.
I buy the stuff (packing) by the pound, but I probably do 20 or so a year.
GT
-
How often do you need to change the rope seals? How can you tell if they are worn out or bad? Just curious, because I changed mine like 2years ago and have only been on the water probably a dozen times, seals still look good to me
Sent from my iPhone using SoCal Jet Boats
-
If they're still relatively soft and flexible, you should be good to go.
-
You could add a zerk while you have the seal out...will keep em greased up prolonging life.