Place diverter bushings/oring

« **on:** March 14, 2013, 05:10:35 PM »

Where can i get them and after i put my diverter on i lost almost all left turn radius i adjusted as much as possible and still wont go left how do i fix this?

« **Reply #1 on:** March 14, 2013, 05:38:10 PM »

I replaced my bushings and o'ring last summer in my american turbine.. picked up the parts from ebay

« **Reply #2 on:** March 14, 2013, 06:10:39 PM »

My boat has almost the same condition
When it acts up like that, I left off the throttle then stab the throttle again and it hooks up and turns.
What size boat is it?

Sent from my iPad using SoCalJetBoats mobile app

« **Reply #3 on:** March 14, 2013, 06:11:42 PM »

Go to place diverter.com there in
La habra California. Tim is a cool cat he owns the place! Very reasonable prices and great customer service!!

😎

« **Reply #4 on:** March 14, 2013, 06:13:41 PM »

Ill check ebay i dont have a pay pal tho and mines a 18 ft i disconnect the cable and the nozzle turns free lock to lock both ways my cable just wont do it tho i was thinkin about drillin a hole closer in on the steering arm and makin it like a quick steer it should give me more movement right ?

« **Reply #5 on:** March 14, 2013, 07:57:35 PM »

Ok fixed the steering problem now to get bushings and an o ring oh and to fix it i dissconnected the steering cable turned the wheel full left adjusted the cable back out and turned the nozzle full left and drilled a new hole now i have full left and full right again and i have adjustability in the tube again

quick olds

Place diverter bushings/oring

circletracktoyota

Re: Place diverter bushings/oring

uncleBOBBY

Re: Place diverter bushings/oring

2fass 4 you

Re: Place diverter bushings/oring

quick olds

Re: Place diverter bushings/oring

quick olds

Re: Place diverter bushings/oring