SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: angermgmt on April 10, 2015, 09:04:07 AM

Title: Switching to studs
Post by: angermgmt on April 10, 2015, 09:04:07 AM

Am I supposed to Locktite the studs in the the bowl???


Sent from my iPhone using SoCal Jet Boats

Title: Re: Switching to studs
Post by: GT Jets on April 10, 2015, 09:33:37 AM

Absolutely.

GT

Title: Re: Switching to studs
Post by: angermgmt on April 10, 2015, 09:35:53 AM

Blue ?


Sent from my iPhone using SoCal Jet Boats

Title: Re: Switching to studs
Post by: bbfsouthwind on April 10, 2015, 09:48:22 AM

Blue should hold em just fine but red will lock them in and require a little heat to remove.


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Switching to studs
Post by: GT Jets on April 10, 2015, 10:25:58 AM

Red. Locktite 262 or equivalent.

JMO.

Title: Re: Switching to studs
Post by: smoothaseggs on April 15, 2015, 07:33:46 PM

I want to do the same when I reassemble after rebuild.  Where did you buy the stud kits?
If there is a place that sells them
Thanks

Sent from my SCH-I545 using SoCal Jet Boats mobile app

Title: Re: Switching to studs
Post by: angermgmt on April 15, 2015, 07:41:16 PM

Quote from: smoothaseggs on April 15, 2015, 07:33:46 PM

I want to do the same when I reassemble after rebuild.  Where did you buy the stud kits?
If there is a place that sells them
Thanks

Sent from my SCH-I545 using SoCal Jet Boats mobile app

ARSMarine.com. They have 3" and 4" sets. Got the 4". Probably should have gotten the 3"


Sent from my iPhone using SoCal Jet Boats

Title: Re: Switching to studs
Post by: Your Mom on April 15, 2015, 07:49:28 PM

You can buy a piece of thread bar stock an cut them to you liking for less... Good hardware stores carry em.

Title: Re: Switching to studs
Post by: smoothaseggs on April 15, 2015, 07:58:36 PM

If doing the bar stock..do they have it on stainless.  Or does it matter

Sent from my SCH-I545 using SoCal Jet Boats mobile app

Title: Re: Switching to studs
Post by: Your Mom on April 15, 2015, 08:03:36 PM

Yes they have it in SS.

Title: Re: Switching to studs
Post by: jyeager on April 15, 2015, 08:11:27 PM

Best do it in stainless. If you ever want to get them out you'll be f'ed if they are not


Sent from my iPhone using SoCalJetBoats mobile app

Title: Re: Switching to studs
Post by: jbrundahl3@yahoo.com on April 15, 2015, 09:27:48 PM

McFadden Dale hardware in Anaheim has stainless steel all thread and a great selection of any hardware you might need. Highly recommend them.


Sent from my iPhone using SoCal Jet Boats

Title: Re: Switching to studs
Post by: BoatsNhoes on April 16, 2015, 08:43:27 AM

Yup" I worked in that area for years and that place has everything you need for hardware and industrial supplies


Sent from my iPhone using SoCal Jet Boats