SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Ralph Brunt on July 02, 2007, 09:03:37 AM
-
i have to give a big thx to jim brock at cyclone speed and marine.
i called jim brock on saturday and told him i needed my pump gone through so i could make the avi trip and he told me to bring it in on sunday and he would take care of it. now i dont know about any of the other pump shops, but i know this guy dont work on sundays. that being said he opened his shop for me and rebuilt my pump so i could install it on the 4th and test this weekend. so in my book there is only one pump guy and jim is it. customer service goes along way with me and this guy went above and beyond. oh yeah he worked until after 8pm :o
he took my pump apart while i waited, measured the wear ring clearance, over .180 and it should be no more than .060. as well the impeller was dull as a butter knife, that explains why the hondo was such a turd.
jim detailing the impeller
(https://www.socaljetboats.com/cpg/albums/userpics/10041/lake_elsinore_july_1_2007_035.jpg)
(https://www.socaljetboats.com/cpg/albums/userpics/10041/lake_elsinore_july_1_2007_036.jpg)
(https://www.socaljetboats.com/cpg/albums/userpics/10041/lake_elsinore_july_1_2007_038.jpg)
and some other stuff in his shop
(https://www.socaljetboats.com/cpg/albums/userpics/10041/lake_elsinore_july_1_2007_042.jpg)
(https://www.socaljetboats.com/cpg/albums/userpics/10041/lake_elsinore_july_1_2007_045.jpg)
this is his race engine for the caution 460 boat that holds many records all aluminum donavan
(https://www.socaljetboats.com/cpg/albums/userpics/10041/lake_elsinore_july_1_2007_049.jpg)
once again thanks jim brock
-
Jim [size=9]Brock[/size] is the man for doing that for you . Cant wait to hear what a diffrence that'll make.
-beerjet-
-
Jim [size=9]Brock[/size] is the man for doing that for you . Cant wait to hear what a diffrence that'll make.
-beerjet-
yes, Jim [size=9]Brock[/size] is a good guy!
-
yes, Jim [size=9]Brock[/size] is a good guy!
I don't know Jim [size=9]Brock[/size] But he sounds like a cool guy...Amazing engines in that shop..:o :o ;D
-
thanx guys, i just wanted to pass along a good experience since we all need some help at sometime or another.
-
I can't wait, probably you either, for the outcome of the boat with the changes/rebuild done to the pump.
-
Ralph, could you call him about somr seats for me? The ones i was gonna get were ugly. I can get the whole boat for $100 w/ V-drive and everything...prolly will, ex Budwieser race boat.
-
Ralph, could you call him about somr seats for me? The ones i was gonna get were ugly. I can get the whole boat for $100 w/ V-drive and everything...prolly will, ex Budwieser race boat.
:o
-beerjet-
-
ralph, i think you live in the long beach area if correct, what is the address of this most excellent establishment and phone number also so we may load his pockets with my cash
-
ralph, i think you live in the long beach area if correct, what is the address of this most excellent establishment and phone number also so we may load his pockets with my cash
he is in the valley phone #818 890 1867 name is jim brock, cyclone speed and marine
tell him ralph from socaljetboats sent you
-
12676 Pierce Street, Unit #8
Pacoima, CA 91331-7444