SoCal Jet Boats

Tech Talk => Jet Pumps => Topic started by: electrowoman on April 30, 2009, 11:48:28 PM

Title: Universal joint part number?
Post by: electrowoman on April 30, 2009, 11:48:28 PM

I don't have much info at this point but I thought I'd fire this out incase someone knew...

The Glastron Carlson line 1977  1978  CV23 with the 460 jet.  Rockwell H-bar drive line I believe.
What is the part number for the universals?

The local parts shops only had joints with the grease fittings in the center and they were a bit wider.

Anyone?   

Title: Re: Universal joint part number?
Post by: crewchief22 on May 01, 2009, 06:42:48 AM

I don't know for sure, but what I installed into my drive line were Precision brand #934.

Hope that helps.

crewchief

Title: Re: Universal joint part number?
Post by: electrowoman on May 01, 2009, 08:23:36 AM

Did they have grease fittings on the outside of the caps?
Thank you for the number.  ;D

Crap. I'm not having any luck on that part number.  Could you send along a web site?

Title: Re: Universal joint part number?
Post by: jet boat performance on May 01, 2009, 08:58:53 PM

Go for the Zerks in the caps ,on the Rockys , if crews number doesn't work call Me I got the Neapco # on my desk 1 Tom

Title: Re: Universal joint part number?
Post by: electrowoman on May 02, 2009, 12:05:54 PM

Thank you Tom, let me know if they are in stock.
Dave

Title: Re: Universal joint part number?
Post by: electrowoman on May 05, 2009, 10:20:41 AM

Haven't heard from Tom, anyone else have the part number??

Title: Re: Universal joint part number?
Post by: KonaCole on May 05, 2009, 10:32:44 AM

I called Tom yesterday and they are swamped.  I believe that he can get them for you, you will probably have to give him a call.

Title: Re: Universal joint part number?
Post by: crewchief22 on May 05, 2009, 12:21:29 PM

Here is a link to Federal Mogul / Precision U-Joints...

http://www.federal-mogul.com/en/AftermarketSolutions/NorthAmerica/SteeringSolutions/Products/PrecisionUniversal-Joints/

Title: Re: Universal joint part number?
Post by: electrowoman on May 05, 2009, 06:55:43 PM

Thank you all.   Tom shipped them out today.

 ;D