SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: Ken on April 27, 2014, 01:24:00 PM
-
Without pulling it all apart, is there a way to figure out what exact pump/style I have? There is absolutely no stamping, rivited plate, casting numbers on it anywhere. It was at one time completely smoothed and polished inside and out, so anything that was there is now gone. Any tips based on my pictures??
Thanks, Ken
-
Berkeley 12JC, most of them came with A impellers, making the full model number a 12JC-A
GT
-
Berkeley 12JC, most of them came with A impellers, making the full model number a 12JC-A
GT
You can tell that from my crappy pics?? COOL, THANKS. Anything "special" I need to know about them, other than the search function on here. Didn't know what to search for.
I appreciate it GT.
Ken
-
You can tell that from my crappy pics?? COOL, THANKS. Anything "special" I need to know about them, other than the search function on here. Didn't know what to search for.
I appreciate it GT.
Ken
Nothing special, it's a basic good pump (I believe the most common pump on older boats) only down side is you can add any kind of droop to it. As compared to a split bowl.
Sent from my iPad using SoCal Jet Boats
-
Just going to say it out loud.
Less than 2% of the jet boats out there can take advantage of a droop. Not sure why you guys are so stuck on that.
It is not until you get into the low 600HP range that you can even make a droop work.
-
Just going to say it out loud.
Less than 2% of the jet boats out there can take advantage of a droop. Not sure why you guys are so stuck on that.
It is not until you get into the low 600HP range that you can even make a droop work.
Because with a droop and 8 degrees worth of wedges in front of it that droop no longer is below the water line like it should be and now you have and knee knocker she it's on the trailer and a HUGE rooster tail when it's in the water.
Sent from my iPad using SoCalJetBoats mobile app
-
Because with a droop and 8 degrees worth of wedges in front of it that droop no longer is below the water line like it should be and now you have and knee knocker she it's on the trailer and a HUGE rooster tail when it's in the water.
Sent from my iPad using SoCalJetBoats mobile app
Silly me... Should have guessed... You can also bore and offset bush the pins on a JC and do the same thing and save some shin meat. :sly:
-
Shins are over rated. Just something else to ache when we get old.
Sent from my iPad using SoCalJetBoats mobile app
-
It is ALL about the ROOST!
Sent from my SPH-L720 using SoCal Jet Boats mobile app
-
Just going to say it out loud.
Less than 2% of the jet boats out there can take advantage of a droop. Not sure why you guys are so stuck on that.
It is not until you get into the low 600HP range that you can even make a droop work.
interesting is that because you need to make that kind of hp to begin to pick the boat up ?
Sent from my SCH-I545 using SoCal Jet Boats mobile app
-
I am no where near that kind of H.P. So not being able to use a droop isn't a big deal to me. I've got a bid on a Place diverted for it though.
-
I am no where near that kind of H.P. So not being able to use a droop isn't a big deal to me. I've got a bid on a Place diverted for it though.
Hope you win it... That's my auction you are bidding on.
Sent from my iPhone using SoCalJetBoats
-
Ha Ha, really? How do you know? I'm so NOT up to date on this computer type stuff!! If it weren't for "bookmarks" I'd never rember how to get back to a web site!!
Hope I win it too!!
Sent from my iPad using SoCal Jet Boats
-
Ha Ha, really? How do you know? I'm so NOT up to date on this computer type stuff!! If it weren't for "bookmarks" I'd never rember how to get back to a web site!!
Hope I win it too!!
Sent from my iPad using SoCal Jet Boats
Just a wild guess! Impala"ken" gave me a clue...
You can always buy it now 😎... Or I can give a fellow scjb member a discount if you'd like to make an offer
Sent from my iPhone using SoCalJetBoats
-
I am no where near that kind of H.P. So not being able to use a droop isn't a big deal to me. I've got a bid on a Place diverted for it though.
I have a JC also, and just got a diverter for my. Made worlds of a difference! Only thing that sucks is now I want to go faster and more roost... D@mn this site, hahaha
Sent from my iPad using SoCal Jet Boats
-
I have a JC also, and just got a diverter for my. Made worlds of a difference! Only thing that sucks is now I want to go faster and more roost... D@mn this site, hahaha
Sent from my iPad using SoCal Jet Boats
Ain't that the truth
Sent from my iPhone using SoCal Jet Boats
-
interesting is that because you need to make that kind of hp to begin to pick the boat up ?
Sent from my SCH-I545 using SoCal Jet Boats mobile app
The best possible answer I can give you is that it takes way more thrust to take full advantage of the lower thrust line, it wants to push on the lower "X" dimension on the transom and it tends to lift the boat form the middle, I have never seen a droop make a positive change to the typical 350 HP jet..
I am sure there are those that got it to work though. Or at minimum, think they got it to work.
GT
-
lol kind of like putting cold air induction on and thinking your going faster because it's louder
Sent from my SM-P600 using SoCal Jet Boats mobile app
-
lol kind of like putting cold air induction on and thinking your going faster because it's louder
Sent from my SM-P600 using SoCal Jet Boats mobile app
Wait...... Louder is NOT faster? :-\
-
lol kind of like putting cold air induction on and thinking your going faster because it's louder
Sent from my SM-P600 using SoCal Jet Boats mobile app
My wife has a 66 Chevelle that she drove in high school. I put a 4 barrel carb on it and when the secondary's would open up and it had a big ass air cleaner on it and would suck a bunch of air and Make a bunch of noise she thought it was so much faster lol
Sent from my iPhone using SoCal Jet Boats
-
My wife has a 66 Chevelle that she drove in high school. I put a 4 barrel carb on it and when the secondary's would open up and it had a big ass air cleaner on it and would suck a bunch of air and Make a bunch of noise she thought it was so much faster lol
Sent from my iPhone using SoCal Jet Boats
I used to have a Chevy 3/4ton LS7 powered 4X4 pick-up with a four speed and my buddy/roommate had a 3/4ton Ford 4X4 with a 300 six, the thing had so much torque we had to build a set of traction bars for it. He cam home one night all excited because he got a V8 for his truck so he could make it "Like mine". I instantly thought he picked up a 460 for it. So I go out to the driveway to see what he picked up, it was a 302 small block. He was convinced that it hauled ass after the swap... I didn't have have heart to tell him he went backwards.. LOL
It did sound better though. 8)
-
I used to have a Chevy 3/4ton LS7 powered 4X4 pick-up with a four speed and my buddy/roommate had a 3/4ton Ford 4X4 with a 300 six, the thing had so much torque we had to build a set of traction bars for it. He cam home one night all excited because he got a V8 for his truck so he could make it "Like mine". I instantly thought he picked up a 460 for it. So I go out to the driveway to see what he picked up, it was a 302 small block. He was convinced that it hauled ass after the swap... I didn't have have heart to tell him he went backwards.. LOL
It did sound better though. 8)
your right those old 300 straight 6's where great engines I worked on a fleet of them.
Sent from my SCH-I545 using SoCal Jet Boats mobile app