SoCal Jet Boats
Tech Talk => Jet Pumps => Topic started by: circletracktoyota on November 03, 2012, 10:25:38 AM
-
Ok guys, im taking my american turbine pump outta the boat this off season.. just to freshen it up and maybe give it a little lovin' too. So who is the pump GURU in Inland Empire - OC area..??
We are looking forward to next season and hanging out with y'all again ( next time i wont sleep thru the parking lot party)
-
I.E. local would probably say Jack at Mpd in costa mesa. A lot of people like Tom at jetboatperformance his up north. I personally use Jim Coffey of performancejet.com, out of the three he is the only one that I can get a hold, he always returns my calls, always replies to my emails and talks to me like a friend not client. He's in northern california like Tom.
-
Jim Brock , Pocima Ca.
Cyclone Speed and Marine
-
Jim Brock , Pocima Ca.
Cyclone Speed and Marine
:thumbup: Jim did mine two seasons ago, and it kicks ass
-
I suggest the following (in no particular order)
Cyclone Speed and Marine in Pacoima
MPD in Coasta Mesa
B1 Racing in Santa Ana (I believe)
GS Marine in Norco
-
I suggest the following (in no particular order)
Cyclone Speed and Marine in Pacoima
MPD in Coasta Mesa
B1 Racing in Santa Ana (I believe)
GS Marine in Norco
Agreed. I had B1 do my stuff this tied and was really impressed. Great tech support too
-
Come up to long beach...I'll build you a proper pump for $200. You buy the parts. This isn't a tear it down and slap it together deal....rotating assembly will get indicated in on the lathe, turned concentric within .0005", the shaft/impeller assembly dynamically balanced and fitted properly to the the housing/wear ring.
I've got a thrust bearing, but you'll need to bring the rest of the rebuild parts.
-
+1 for B1 Racing. Here's the contact info.
http://www.b1racing.net/ (http://www.b1racing.net/)