Hi All,

Im in the process of ordering/obtaining parts for my weiman. For now i will be running a 12JC pump.

I have the pump, transom housing, and tiller arm. I do not have anything to attach the cables to the transom housing or the jet itself.

What do i need? My forward reverse cable has a heim joint on one end. Im assuming i through bolt this to the reverse bucket?

What parts do i need to attach the forward/reverse cable to the tiller arm. What parts do i need to mount the Steering cable?

Heres what i think i need, but please let me know if im wrong or right

Steering
1. Steering tube
2. Steering tube nuts
3. Steerign Tube bushing

Forward/Reverse Cable
1. Cable seal for the transom adapter. Either the but with the 3 piece seal (2 washers and a bushing) Or the nicer one piece units
2. Bolt to through bolt the heim joint to the reverse bucket
3. what is needed to mount the forward/reverse cable to the tiller arm?
4. Is the bowl o-ring needed for the transom adapter? Or is silicone okay?

What kind of silicone?

Thanks, also if anyone has the steering tube or any of the other stuff for sale. Let me know

Galco Conduit Entry Seal for Overjacketed Cable

Forgot pic

Hi Joe,

thanks! I looked on their website but i dont see it. What section would it be in at the store?

thnaks
steve

In electrical conduit.  May not be the same brand.  I got a few at Lowe's.

I want to say 1/2" conduit

Bj marine in Anaheim has those fittings


Sent from my iPhone using SoCal Jet Boats

what should i use for the steering tube?