SoCal Jet Boats
Discussion => Lake Havasu => Topic started by: RockyCapone on January 10, 2013, 09:34:40 AM
-
I made some simple changes to boat this off season, used Demon 750 carb,Victor intake, and I'm going with an HEI instead of dual points. How do you guys test out the boats without fear it stalls in the middle of lake/river and you just float away? :banghead: Or is there a spot with no current? Im still newish to boats but not these engines.
And oddly enough its harder to meet people up here in Kingman AZ than I expected-cuz there isn't anybody into these boats up here except for one guy.
-
you can idle it on the trailer to make sure all the water is staying outside the boat. and other things are running right.
Then just take a paddle with you or a friend with a tow rope and another boat or jet ski.
just make it happen
-
just make it happen
Fudge yea!!! I'll be there in March come hell or high water.....well high water whocares!!
-
Tune it at the launch ramp, on the trailer. Bullhead Comm Park is kinda shallow and murky, Riverside casino is deeper and good clear water. Just do it on an 'off' day, like tomorrow :thumbup: Then theres always Lake Mohave.
I also static time every motor I've ever built, or replaced or removed the dizzy. Set your balancer on 10* (or your initial timing), set dizzy to fire at that point.
If ya need a hand, I'm local.
Daniel
-
Tune it at the launch ramp, on the trailer. Bullhead Comm Park is kinda shallow and murky, Riverside casino is deeper and good clear water. Just do it on an 'off' day, like tomorrow :thumbup: Then theres always Lake Mohave.
I also static time every motor I've ever built, or replaced or removed the dizzy. Set your balancer on 10* (or your initial timing), set dizzy to fire at that point.
If ya need a hand, I'm local.
Daniel
ok thanks!!
-
i am with mash on it you can go to lazy harrys in the afternoon do the same with no current i am local also.
-
Test up river so if anything happens you can float back down.. Lol