Water coming out of headers

« **on:** April 29, 2015, 06:44:28 PM »

Why would one header have water coming out of it and not the other?
I checked the basset t for abstractions,
The lines are equal lengths and I check the ss line going to the bottom of the header? lost now......any suggestions much appreciated...

Sent from my iPhone using SoCal Jet Boats

« **Reply #1 on:** April 29, 2015, 07:13:25 PM »

The has to be plugged somewhere. Maybe pull a line off when you have it hooked up to a water hose?

« **Reply #2 on:** April 30, 2015, 10:23:19 AM »

Met you at Big Bend. If I remember correctly the lines from the tee valve to the header was #8 aeroquip hose. Remove the hose to the header and check for a internal flapper. It is easy to cut the rubber linner when installing the fitting to hose.

« **Reply #3 on:** April 30, 2015, 01:52:35 PM »

How's it going ? Yeah -8 I'm gonna check the line too the one header . It's weird when I first took it out they both had water to coming out
Thanks for response...

Sent from my iPhone using SoCal Jet Boats

« **Reply #4 on:** April 30, 2015, 02:10:00 PM »

THANK YOU! I check it out. I could blow though one line and not the other and found a rolled up ball of rubber ..... Sweet fixed ..

Sent from my iPhone using SoCal Jet Boats

« **Reply #5 on:** April 30, 2015, 02:32:40 PM »

69Kona, when's your next trip to Laughlin.

« **Reply #6 on:** April 30, 2015, 07:01:05 PM »

Next weekend Hoofy...

Sent from my iPad using SoCal Jet Boats

« **Reply #7 on:** May 01, 2015, 09:46:02 PM »

Here is one tank just sitting in the boat

69kona

Water coming out of headers

philofab

Re: Water coming out of headers

Hoofy

Re: Water coming out of headers

69kona

Re: Water coming out of headers

69kona

Re: Water coming out of headers

Hoofy

Re: Water coming out of headers

69kona

Re: Water coming out of headers

Maker

Re: Water coming out of headers