SoCal Jet Boats

Tech Talk => Mini Jets => Topic started by: 69kona on April 29, 2015, 06:44:28 PM

Title: Water coming out of headers
Post by: 69kona on April 29, 2015, 06:44:28 PM

Why would one header have water coming out of it and not the other?
I checked the basset t for abstractions,
The lines are equal lengths and I check the ss line going to the bottom of the header? lost now......any suggestions much appreciated...


Sent from my iPhone using SoCal Jet Boats

Title: Re: Water coming out of headers
Post by: philofab on April 29, 2015, 07:13:25 PM

The has to be plugged somewhere. Maybe pull a line off when you have it hooked up to a water hose?

Title: Re: Water coming out of headers
Post by: Hoofy on April 30, 2015, 10:23:19 AM

Met you at Big Bend. If I remember correctly the lines from the tee valve to the header was #8 aeroquip hose. Remove the hose to the header and check for a internal flapper. It  is easy to cut the rubber linner when installing the fitting to hose.

Title: Re: Water coming out of headers
Post by: 69kona on April 30, 2015, 01:52:35 PM

How's it going ? Yeah -8  I'm gonna check the line too the one header . It's weird when I first took it out they both had water to coming out
Thanks for response...


Sent from my iPhone using SoCal Jet Boats

Title: Re: Water coming out of headers
Post by: 69kona on April 30, 2015, 02:10:00 PM

THANK YOU! I check it out. I could blow though one line and not the other and found a rolled up ball of rubber ..... Sweet fixed ..


Sent from my iPhone using SoCal Jet Boats

Title: Re: Water coming out of headers
Post by: Hoofy on April 30, 2015, 02:32:40 PM

69Kona, when's your next trip to Laughlin.

Title: Re: Water coming out of headers
Post by: 69kona on April 30, 2015, 07:01:05 PM

Next weekend Hoofy...


Sent from my iPad using SoCal Jet Boats

Title: Re: Water coming out of headers
Post by: Maker on May 01, 2015, 09:46:02 PM

Here is one tank just sitting in the boat