SoCal Jet Boats
Classifieds => Miscellaneous / Spam => Topic started by: quick olds on February 09, 2013, 10:57:54 AM
-
Came off my 94 complete lift i needed bushings and ball joints so i just did a solid axle swap lol 450 obo
-
How much was your solid axle swap I'm lookin into doing the same thing!
-
Sky manufacturing is the one i went with and it was 4 change to my door then you need springs and steering i went with 6 inch springs from comp leaf springs they ran 400 to my door and the kit has 6 inches of lift built into it if you go this route i have some 4 inch lift springs that need bushings but will fit the sky kit ill let go for 200 there 73-87 chevy front springs
-
How much was your solid axle swap I'm lookin into doing the same thing!
main thing to look for is a Dana on craigslist, even better, someone parting out what you need.
-
Sky manufacturing is the one i went with and it was 4 change to my door then you need springs and steering i went with 6 inch springs from comp leaf springs they ran 400 to my door and the kit has 6 inches of lift built into it if you go this route i have some 4 inch lift springs that need bushings but will fit the sky kit ill let go for 200 there 73-87 chevy front springs
sky was the one I was looking at for a reverse shackle kit for my old Ford. If I were to have kept the truck, I would've pulled the trigger. What's wrong with your truck and the way it rides?
I've been driving two bone stock Chevy trucks for almost a year and they work fine and do not ask for much..
-
I wheel it alot and on the 35s ir eates bushings and ball joints the are fine with stock tires but when you wheel alot and start pullin on the bushings with bigger tires the front end gets weak
-
What front axle did you use?
😎
-
I got a really good deal on a dana 44 but im lookin for a dana 60 im only gonna use the 44 till it pops
-
Thanks!
😎
-
No prob this is mine as of today still need a pitman arm and shocks tho
-
And bigger tires the 35's arent cuttin it any more
-
Pending sale
-
Sold