SoCal Jet Boats

Classifieds => Miscellaneous / Spam => Topic started by: marty722 on April 30, 2009, 04:39:07 PM

Title: small drywall work needed
Post by: marty722 on April 30, 2009, 04:39:07 PM

I have the drywall and tape but need a drywaller to finish the work, Here are some pics. If your a drywaller please respond with a price. I can do the painting. Thanks.

Marty

martyjm@pacbell.net

Title: Re: small drywall work needed
Post by: flytime on April 30, 2009, 05:12:48 PM

get ahold of Omar(Beerjet) he will do almost anything for money ;D

Title: Re: small drywall work needed
Post by: marty722 on April 30, 2009, 05:26:11 PM

I'll do almost anything for money also but does he know how to do drywall... Also I forgot to tell you I'm located in Burbank.

Title: Re: small drywall work needed
Post by: beerjet on April 30, 2009, 07:07:06 PM

Quote from: marty722 on April 30, 2009, 05:26:11 PM

I'll do almost anything for money also but does he know how to do drywall... Also I forgot to tell you I'm located in Burbank.

Sorry, dont do drywall.

I thought Bob was a drywaller,  ??? since he's always covered in white goopy stuff.....
ohhhh wait .......  :-\
ewwwwwww Bob..........  :screwy:

-beerjet-

Title: Re: small drywall work needed
Post by: enginedoctor on April 30, 2009, 07:12:04 PM

That's a piece of cake...If Omar needs help...I will be their ;D

Title: Re: small drywall work needed
Post by: enginedoctor on April 30, 2009, 07:17:26 PM

Just cut the dry waLL TO SIZE WITH A EXATO KNIFE  , GROOVE YOUR TAPE AREA, USE DRYWALL SCREWS AND
SCREW IN PLACE, THENESE FIBERGLASS TAPE AND MUD TO BLEND...THEN USE QUICK DRY MUD, FINISH SAND.
PRIME PAINT...U ARE DONE..IT IS VERY EASY ;D

Title: Re: small drywall work needed
Post by: enginedoctor on April 30, 2009, 07:21:50 PM

oR CONTACT     dan dan the drywall man/ aka top gun...located in whittier ca. 90604.  I can get u his #.

Title: Re: small drywall work needed
Post by: marty722 on April 30, 2009, 08:20:33 PM

thanks for all the info...I may give it a shot, what the hell how bad can I screw it up :banghead:

Title: Re: small drywall work needed
Post by: enginedoctor on April 30, 2009, 08:42:55 PM

You can't...it is only cosmetic.....doesn't have compression, oil leaks , water leaks etc.

just remember,  cut drywall w/exato knife on both sides, then just snap off....no brainer ;D

Title: Re: small drywall work needed
Post by: IRRebel on April 30, 2009, 08:53:07 PM

You're not trying to launch a missile here. Go to Home Depot and grab a couple free paint sticks, a 2x2 piece of sheetrock, some drywall tape, 1" drywall screws and joint compound.

Cut the hole square, then put a couple of paint sticks in the hole and pull them so they are up against the back of the drywall.  Run a screw in each side holding the sticks to the drywall. then cut a piece of the 2x2 drywall to fit the hole and screw it to the paint sticks. chamfer the edges, put on some joint compound then the tape, then joint compound when its dry and sand like hell. Nothing to it.

Ray

Title: Re: small drywall work needed
Post by: marty722 on May 01, 2009, 09:37:59 AM

I know it's not rocket science but i'm disabled and I'm unable to do alot of bending and stuff like that.
Thanks for all the great info. It also has to be sprayed with the orange peel crap. I think I found someone that will do it real cheap.... Thanks again for the great info.