SoCal Jet Boats
Classifieds => Miscellaneous / Spam => Topic started by: 76 Bonneville on November 04, 2008, 04:29:53 PM
-
Need to clean out the garage.
Brand new old stock BBC Hooker Headers dry - 350.00 Pending
Chrome valve covers BBC, fair condition - 40.00 Pending
Scoop good shape needs polish - 90.00
Flame arrestor 8x3 w/ 5" flange (alum) - 20.00
Ski tow BBC has rust needs cleaning up - 20.00
All prices plus shipping
-
Tunnel Ram BBC Rec port - the only # on it is underneath CR1985
Probably had a # on top but polished off 100.00 PENDING
Carter carbs 625cfm - need rebuild 100.00
Holley 600 cfm - #4776-2 bought from bulldawg art, he said they
were just rebuilt paid 400.00 400.00
Plus Shipping
-
Ron I have a 10x20 storage unit you can store all in. Thats where your 460 is right now ;). Is Cindy going to sell my sanger too thats sitting on the back 40? haha
-
Black Gaffrig w/ convex lens - Anno slightly discolored 100.00
Formuling steering wheel 40.00 Sold
Medallion gauges w/ bezels - no volt gauge 50.00
Faria gauges w/Beede trim - Speedo lens is dirty on the inside
Tach looks new 75.00 Sale Pending
Rex tach 20.00
Eliminator speedo 20.00 Sold
-
Stanless Scoop - Brand new just took it out of the plastic bag.
Paid 160.00 plus tax Just for you 120.00 obo
-
PM sent.
-
Are the headers jet or V drive?
-
Ron is csared of V-Drives, sez there is to much hardware hangin down there. So Im guessing they are for a jet.
-
still got the valve covers?? what do ya mean by...fair condition ??? PM and let me know...would ya? Thanx... Tracy ;D 8)
-
As for the headers; I have a V drive set and they will only clear about 12" from the rear port to the bottom of the collector. Whith my set up these only leave an 1/8th of clearance, I would like to have 15" plus if possible.
-
Sorry the headers are for a jet.
-
Tracy, there's no rust, just little pits and scratches. I just took some wonder cloth to one and it looks alright. A polish with some abrasives in it would probably do a better job. Ron
-
Sorry I led you to miss understand - I have a jet boat (Schiada 19), but I need to make sure they will clear the transum. The ones I metioned will not.
-
Sorry I led you to miss understand - I have a jet boat (Schiada 19), but I need to make sure they will clear the transum. The ones I metioned will not.
I just measured from the collector to the top of the flange and its only 10 3/8.
-
Too bad, they must actually be V drive headers, but thank you for checking.
-
Too bad, they must actually be V drive headers, but thank you for checking.
I wa told they were jet boat headers when I bought them. I just measured my old school Gil headers on my Rogers and there 9 1/2"
-
I also have a set of old school Gil"s, at that point they measure the same as you say. They should angle up after that, but hey if they match the Gil's about a foot back they should be good.
-
Here are some more pics
-
Those are jet headers , V-drive headers angle together as you go back . If that makes sense ???
-beerjet-
-
Great - any haggle room?
-
Great - any haggle room?
fitty bux
-
Great - any haggle room?
300.00 if you pick up
-
Done deal! Send me an address and I will forward the funds and then worry about the pickup. My soninlaw works in the Temecula to Palm Springs area, is that somewhat close to Valley Center or are they somwhere else? Thank you.
-
Bump
-
what size carter carbs
-
what size carter carbs
I was told they were 600's. Not sure where the numbers are, they've been powder coated over. Came off of a running motor, but i'm sure they need going thru.
-
The numbers were stamped in on the forward edge of the base plate near the mounting bolt.
The most common Carters were 625cfm but you could get 500cfm also.
-
Thanks Keith, but I couldn't find any numbers under the powder. The primaries are 1 7/16 in dia. and have a number 2-185 on them. The secondaries are 1 11/16 in dia. and have a number 2-281. Ron
-
I should have googled it first. Venturi measurements are primaries 1 3/16 and secondaries are 1 9/16 which make them 625's
-
Tunnel Ram BBC Rec port - the only # on it is underneath CR1985
Probably had a # on top but polished off 100.00 PENDING
Carter carbs 625cfm - need rebuild 100.00
Holley 600 cfm - #4776-2 bought from bulldawg art, he said they
were just rebuilt paid 400.00 400.00
Plus Shipping
Bump
-
Black Gaffrig w/ convex lens - Anno slightly discolored 100.00
Formuling steering wheel 40.00 Sold
Medallion gauges w/ bezels - no volt gauge 50.00
Faria gauges w/Beede trim - Speedo lens is dirty on the inside
Tach looks new 75.00 Sale Pending
Rex tach 20.00
Eliminator speedo 20.00 Sold
Bump
-
Black Gaffrig w/ convex lens - Anno slightly discolored 100.00
Formuling steering wheel 40.00 Sold
Medallion gauges w/ bezels - no volt gauge 50.00
Faria gauges w/Beede trim - Speedo lens is dirty on the inside
Tach looks new 75.00 Sale Pending
Rex tach 20.00
Eliminator speedo 20.00 Sold
Bump
-
Need to clean out the garage.
Brand new old stock BBC Hooker Headers dry - 350.00 Pending
Chrome valve covers BBC, fair condition - 40.00 Pending
Scoop good shape needs polish - 90.00
Flame arrestor 8x3 w/ 5" flange (alum) - 20.00
Ski tow BBC has rust needs cleaning up - 20.00
All prices plus shipping
Bump
-
If the valve covers don't go, let me know.
-
If the valve covers don't go, let me know.
Keith, I've got another set of alum. ones that need polishing if your interested. What you really need is that old school scoop. Ron
-
Need to clean out the garage.
Brand new old stock BBC Hooker Headers dry - 350.00 SOLD
Chrome valve covers BBC, fair condition - 40.00 SOLD
Scoop good shape needs polish - 90.00 SOLD
Flame arrestor 8x3 w/ 5" flange (alum) - 20.00
Ski tow BBC has rust needs cleaning up - 20.00
All prices plus shipping
-
Tunnel Ram BBC Rec port - the only # on it is underneath CR1985
Probably had a # on top but polished off 100.00 SOLD
Carter carbs 625cfm - need rebuild 100.00
Holley 600 cfm - #4776-2 bought from bulldawg art, he said they
were just rebuilt paid 400.00 400.00
Plus Shipping
-
Stanless Scoop - Brand new just took it out of the plastic bag.
Paid 160.00 plus tax Just for you 100.00 obo
-
Ron, do you have any scoops like the one in the background 4 sale ???
-
Ron, do you have any scoops like the one in the background 4 sale ???
No, seems like everytime I see one come up for sale, its gone that day. Mouser had one for sale yesterday and its gone already. I saw it right after he posted it. I probably should have bought it, but instead I bought another 4 bolt 454 short block from a friend. Could be the motor for the Rootin Tootin Raspberry. Trying to collect parts as the deals come up. I think there's a scoop on ebay I saw the other day with a starting bid of 75.00. Ron
-
I need that flame arrestor
-
I need that flame arrestor
OK, how about 25.00 inc shipping.
-
Sent pm
-
Sent pm
paging 76Bonneville