1
WTB / Floor mounted go petal
« on: March 27, 2014, 02:18:32 PM »
Looking for a floor mount gas petal I have a moon petal assembly to trade also
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
WTB / Ford fe 390 headers
« on: November 15, 2013, 07:16:27 PM »
Looking for a set of Ford fe headers dry or wet thanks..
3
Jet Pumps / Re: Intake questions
« on: November 12, 2013, 01:01:12 AM »
Ok though it looked kinda funny. looked on my pump and it's a 12ja
4
Jet Pumps / Re: Intake questions
« on: November 11, 2013, 10:50:08 PM »
Sorry won't load off my I pad here we go
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
5
Jet Pumps / Re: Intake questions
« on: November 11, 2013, 10:41:12 PM »
Sorry here are the pics
Sent from my iPad using SoCalJetBoats
Sent from my iPad using SoCalJetBoats
6
Jet Pumps / Intake questions
« on: November 11, 2013, 10:38:27 PM »
Wanted to know if this intake will work on my 12ja( think that's what it is) and how to remove and reveal it I need to do some glass work.
Sent from my iPad using SoCalJetBoats
Sent from my iPad using SoCalJetBoats
7
Project Boats For Sale / Re: Looking for good hull
« on: November 03, 2013, 08:34:14 PM »
Thank you guys for the replays I found a hull in Colorado you I could still use some help iding my new one though 
8
Boat Showcase / Re: Some pics of my boats hope you like them
« on: October 01, 2013, 05:41:44 PM »
Here are a few more pics
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
9
Boat Showcase / Re: Some pics of my boats hope you like them
« on: October 01, 2013, 04:57:37 PM »
The two jets are bass boat model kits. The v drive is a kit they made in the 60's 70's they are 1-25 scale the rest of the parts are from my model parts I'll post a few more thanks
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
10
Boat Showcase / Some pics of my boats hope you like them
« on: October 01, 2013, 03:55:37 PM »
This is what I do when the lakes froze over enjoy
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
11
Hulls / Re: help me id this hull
« on: October 01, 2013, 01:29:44 PM »
The guy I got it from said its a Tahiti . I thought my be a Rogers but I did see a couple pics of some eliminators that look like it. Can't find a vin any ware. I also want to tell my new tech support guy carrera202 thanks for the help.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
12
Hulls / help me id this hull
« on: September 30, 2013, 08:44:26 PM »
Hello guys i need some help iding my new hull. Only problem is i dont have a computer right now. Could i send some one the pics via my cell and have some one post it for me im using works computer right now and cant be on to long. As soon my wife figures out witch computer she wants ill post the build thanks Ted Carlson
13
Project Boats For Sale / Re: Looking for good hull
« on: September 17, 2013, 03:21:23 PM »
Ya i should have said I'm in the great state of Wyoming witch is a ways form most of people on here.
let me know if you see anything close to Utah,Colorado or Idaho maybe even Nevada
let me know if you see anything close to Utah,Colorado or Idaho maybe even Nevada
14
Project Boats For Sale / Looking for good hull
« on: September 17, 2013, 01:22:08 PM »
Hello guys haven't posted in two years. Looking for a good hull have engine and hardware just need to put it in something. My boat has more rot than its worth looking for 16 to 18 ft doesn't have to be perfect just something I can go have fun with the kids thanks ...
15
Engine Mechanical / Electrical / Re: What camshaft
« on: July 27, 2011, 09:29:32 PM »
OK offy single plane intake 750 holly carb. comp should be 9 to one Was Gonna use stock valve train I dont want a race motor just to go a little faster than my buddys boat.. Heads and boring were done buy my dad he has been buildings engines for along time. when it came to picking the came i though would ask you guys for some input. What other info do you need ?O ya running logs with snails
16
Engine Mechanical / Electrical / What camshaft
« on: July 27, 2011, 06:54:38 PM »
Hey guys i am building a new engine for my boat. ITs a Ford 390 board 30 0ver. Heads have ben worked over hardened seats new valves. I herd jet pumps like tork so what is a good camshft choice a hot rv type? The boat is a 16 foot Tahiti stock pump and impeller. The engine i have now is a pretty stock engine and i would like to break 50 mph. It will do 47.5 mph at 7000 ft elevation any ideas Ted
17
Engine Mechanical / Electrical / Re: ford 390
« on: September 29, 2010, 08:49:14 PM »
I have the same engine in my boat stock 390 600 carter carb and berk pump. My numbers are close to yours execpt i can't break the 50mph mark yet ;)but I am also at 7000ft.
18
Projects / Re: Pickles new pipes
« on: September 23, 2010, 10:44:59 PM »
Ray I am interested in your old pipes. How much and would you ship thanks Ted..
19
The No Wake Zone / need some help
« on: August 14, 2010, 07:26:45 PM »
Hellow fellas I have not posted anything for awhile and I am still a newbe witch is fine i just love this sight and people in it and not in a gay way.My little brother is the one i need some help with. He has been 6 months clean and now he has money and a good job so we can finish his boat. He moved to Elko NV for work( boss though a new start would help) and his boat is still in Wyoming and i don't see him much. Anyway his hull needs new stringers and floor its a 18 foot sanger flatbottom we think. I know you love pics so i will try and get some. Do you guys know a good boat shop near Elko he said he would't mind traveling 4 or 5 hours away. I just want to help him stay out of trouble.And the boat will help him stay busy. Any thoughts or help would be awsome
20
Trailers / Re: Bunkers or rollers
« on: July 13, 2010, 08:41:06 PM »
Thanks guys i will get some pictures of boat on the trailer i think i might 86 the trailer its pretty scarry looking,
22
Trailers / Bunkers or rollers
« on: July 13, 2010, 04:13:14 PM »
I am going to rebuild my trailer it has four very long bunkers on it now. I want to use v-rollers on the keel and just two short bunkers to keep the boat up right on the trailer. My question is are rollers ok to hold the weght of the boat or will they hurt the keel or pull the bottom out of shape. My boat is a sixteen foot Tahiti. Any input would be great thanks Ted C..
23
Engine Mechanical / Electrical / Re: Team SCJB BBF Motor Build
« on: August 04, 2009, 07:54:55 PM »
Nice job Brad looks like it was Built to eat the heartbeat!!!!!!!!!
24
Engine Mechanical / Electrical / Re: Engine temp
« on: July 21, 2009, 10:40:52 PM »
Yes, sorry from the water pump bypass to the snails. Its set up how you described.Other than I don't have a therostst housing just a block off plate.I trust what you guys are telling me its my dad who thinks I need to slow the water coming out so I don't starv it. Hes is a v-drive guy and runs a neovane pump so he is confused on how my cooling system works. The lakes I run in at home are 55 60 degrees. The lake I go to in Utah is a little warmer 65-75 in August. What kind of presure does my jet put out? It's a berk. I just don't want to brake my block or screw it up.Another thing is my temp sender in in my intakemaifold don't know if that would make a difference.
25
Engine Mechanical / Electrical / Re: Engine temp
« on: July 20, 2009, 11:12:29 PM »
Would that cause cavitation in the block and air locks?