Show Posts
1
Cars / Automobiles For Sale / 65 big window c10
« on: October 14, 2014, 09:16:00 AM »
65 big window c10 $3950 obo
REGISTERED AND RUNNING, no non-op or back tag issues
Blue plates at least
72 c10 shift column from Steering Column Pros (truck has a B and M ratchet shifter now, I didn't get the linkage yet for the column)
New steering box, lines and pump
Frame brackets from Brothers
60 Belaire wheel epoxied with no cracks
doors, ignition switch and glove box are re-keyed with single key
new rubber on gas fill neck
windows are in nice shape!
Doors open and shut great!
Surface rust on sill plates but also in good shape (I was not going to replace)
327/350
good compression on motor, trans shifts nice....BAD: both leak (Every bolt I've come across on her hasn't been tight enough)
Most gauges work
Stock seat belts and original bench. I have lap belts from 5 point harnesses in now
All light and signals work and wipers
Stock wiring has been gone thru "good enough to run" for now. Have a brand new harness that goes with it
Rebuilt Holley carb
New plugs and wires
new oil filter but its the canister type
5 lug/disc brake in front from previous owner
NO SHE'S NOT PERFECT, BUT LOT OF POTENTIAL
Any questions...ask. If I don't know... I'll tell you.
Lot of knick knack parts that go with her also..A/C vents and controls, brackets, manual, etc
call or text (951)751-5690
REGISTERED AND RUNNING, no non-op or back tag issues
Blue plates at least
72 c10 shift column from Steering Column Pros (truck has a B and M ratchet shifter now, I didn't get the linkage yet for the column)
New steering box, lines and pump
Frame brackets from Brothers
60 Belaire wheel epoxied with no cracks
doors, ignition switch and glove box are re-keyed with single key
new rubber on gas fill neck
windows are in nice shape!
Doors open and shut great!
Surface rust on sill plates but also in good shape (I was not going to replace)
327/350
good compression on motor, trans shifts nice....BAD: both leak (Every bolt I've come across on her hasn't been tight enough)
Most gauges work
Stock seat belts and original bench. I have lap belts from 5 point harnesses in now
All light and signals work and wipers
Stock wiring has been gone thru "good enough to run" for now. Have a brand new harness that goes with it
Rebuilt Holley carb
New plugs and wires
new oil filter but its the canister type
5 lug/disc brake in front from previous owner
NO SHE'S NOT PERFECT, BUT LOT OF POTENTIAL
Any questions...ask. If I don't know... I'll tell you.
Lot of knick knack parts that go with her also..A/C vents and controls, brackets, manual, etc
call or text (951)751-5690