What size fittings are on them & would you ship, thanks

Is this still available, I'm in Wa as well & would like to come see it if possible, thanks

Do you have more info or pics, thanks

Where is it located, wanna get it close or half way to Yakima, WA, what compression is the motor pump gas or race or mix also does it have any stress cracks or major cracks or scrapes??? Thanks


Sent from my iPad using SoCal Jet Boats

thanks for all the replies, we got it today, took carb off put another one on from my boat, it ran fine just a little rich, then fired it in the shop where it was kinda dark & saw that a plug wire was sparking against the header flange, took it out & it was melted, changed plug wire & adjusted the looms to hold wires higher & all is good!!! thanks everyone for all the replies!!! And we have quite a bit of experience with this boat & mine, we've ran jets for years, thanks, was just trying to see if someone had this happen before & new off hand, but we diagnosed it all over 1 thing at a time & got it figured out

yeah, it sounds fine at home with no load on pump, but in the water sounds like its running on 6 or 7 cylinders

Ok my dad started his boat with the cover on the scoop & it ran like it had a fouled plug or choke stuck, so we got it home changed plugs & checked to see if choke was stuck on, all was good, took it out again still running like 800 RPMs shy of normal. Would this be the power valve or accelerator pump?? Any ideas or info would be great if someone has had this happen or heard of it, thanks. I hope EVERYONE HAS A SAFE & HAPPY 4th, thanks again


Sent from my iPad using SoCal Jet Boats

I would like more info on the motor that's in it & the pump, I own it now & would like as much info as I can get, thanks


Sent from my iPad using SoCal Jet Boats