We did get it out on the water for a good half day before winter set in, but was mostly unresponsive to tuning commands. We later found that the MAP sensor tested faulty. We have a new MAP sensor and are just waiting for the first early early spring day to bust it out. I expect it is going to go very well when tuned properly. Just gotta get to that point.


 Dad on the water with lap top. Not too much Free Board !

We finally have the boat running well enough for a water test. We had to remove the stock wire harness and ECM system and replace it complete with aftermarket AEM system. Lots of work.  Plus nobody has any experience with this engine at all,so we have been on our own to figure things out.

We hope to hit the water this weekend,weather permitting. I'll try to get some go pro video from the chase boat. Should be interesting.

I cant wait to see it go myself. It is fairly proportionate scale wise vs a normal jet boat. Just smaller size
 My kid has a go pro. I will put him in charge of that so we can get some video to post when it is up and running good

Lol what race you wanting to see, I'm pretty sure brad has almost all the races and we have a few on the go pro 😂😂


"RTCP"

Any or all ! 

. First off your more then welcome to come out. You speak of Washington like it is another country. We got guy's from Canada showing up priorities gone wrong. The video is in this thread with a links. It would be great to get you guys down here one of these trips. Big Bend coming up don't let become a pipe dream. Lol


Sent from my iPhone using SoCal Jet Boats

Thanks Man. What is Big Bend ?

So who is this gate keeper guy? I wish to setup an appointment.


Sent from my iPhone using SoCal Jet Boats

NOW WE'RE TALKING  that's 5?

So its out of the hole to 800' ?  Don't forget the video for us spectator's !

So how about a picture of the gatekeepers boat and a couple specs 

What hp levels are you all running to go over 90 or 100 ? just curious

Will do jimpen. The engine isn't much to look at yet and the turbo looks about the size of a Donut compared to our big jet boat, but we found a  large
oval air cleaner for dual carbs that we plan to wrap around the whole cylinder head in attempt to bling it out some without too much fab...

 8)it's a jr aggressor from Tom and Josh ar JBP !

Love the Baker tunnels that was my first boat but I had a weed wacker on my . Was a fun and fast boat

Right on. Yeah, its a great boat.

Cool boat you have now !

Thanks for the interest guys... this project is still in progress, but it is my Fathers deal and has taken a back seat to some other things going on. We hope to continue making more progress here as we get time.

Engine mounts are now fabricated. Oil pan modifications have begun. A slight mod needed to fit down in the center keel/bilge. After that we need to complete the wiring. I will update this with more pictures in the near future ! The engine bay will be packed that is for sure.

If it comes for sale sometime I will definitely let you all know here first ! It is going to be a little different... and Cool I hope.
Should be a blast to drive around and throw some mini roost !

19" TRD with 10" fenders

76 Bonneville,

So, what are the rookie rules? How long does he run the outside? Looks like you guys have enough speed, just traveling a further distance.