Obnoxious
 I dont have a roller cam core. I am looking to buy new, as for the boost the motor is making I dont know 
 The guy that was helping me who i told to drill the intake so i could run a boost gauge did not    Witch led to alot of swearing. So I ran it all last year not knowing on how much boost it was making.  I just did not want to rip the intake back off I know LAZY.
 The very first thing that I am going to do is drill and tap the intake this year. I do understand that I may have to have the impeller cut but i am going to wait untill I get the new cylinder heads on and a new cam to see how she runs first. I just bought the cylinder heads last fall and there not on the motor yet. I have been running a set of open chamber oval port till now and I do know that they are a big part of my problem but so has been cash. LOL Every year I have been buying parts and slowy pieces by piece its coming together.

I deal with a local cam grinder who does all of my camshafts.  I can supply with either a new cam  I have used some cams that are around 300 advertised duration,, just under .700" lift that are still reliable and easy on valve train,  but making good power.

Pease tell me more

Must sell fast!!! I have found another boat that i gotta have!
 
Only the best of everthing has gone in this boat and motor.
The motor is
A .030 over blanaced, 700 HP BBC,Thats, line honed, with program slayed 4 bolt main caps , that is o ringed for copper head gaskets, with a scat 4340 steel crank, canton 12 qt oil pan, high volume oil pump, fluid damper balancer, forged pistons,  eagle rods, crane cam,  pro comp roller rockers,  crane 7/16 push rods and guide plates ,weiand blower intake maniflold, new polished littlefied 871 blower, 14mm belt,  pair of new polished 750 holley blower carbs, ARP head and main studs, MSD distributor,coil & 6 AL box with  rev limter
 
The boat and pump
Fresh rebuild pump with all new gaskets, seals,bearings,wear ring, new 14-7 stainless steel pump shaft,new stainless steel AA impeller, inducer,pro loader,hydralic place deverter, new high flow bowl, 30 pound water pressure regulator & water injected headers
 
Trailer has all new springs bearing seal and lights could use some new paint!
Over 40,000 spent selling for 22,500

email my if interested peter-cowan1@hotmail.com