Show Posts
1
Engine Mechanical / Electrical / New 76' eliminator owner....motor ?'s
« on: September 19, 2012, 05:06:17 PM »
Well as it says I'm a new one, this is what I have....76' Eliminator bubble deck, delta V bottom I think,
BBF 460 with offy single carb tunnel, D3ve a2a heads, 600 cfm Holley, Berkeley 12jc pump/jet, stock rock grate.
So here is my ?....currently full pedal mash nets me 62mph on GPS at 5300 rpm, trimmed up with a slight chop, full rooster and 15 gallons gas, oh and 300 lbs of humans
, 2 of us.
For you experts out there, is there anything odd about those numbers or anything I could change up right away on the motor to make it a bit stronger running.
Oh and I did a compression check and it's sittin right around 8:1
BBF 460 with offy single carb tunnel, D3ve a2a heads, 600 cfm Holley, Berkeley 12jc pump/jet, stock rock grate.
So here is my ?....currently full pedal mash nets me 62mph on GPS at 5300 rpm, trimmed up with a slight chop, full rooster and 15 gallons gas, oh and 300 lbs of humans
, 2 of us. For you experts out there, is there anything odd about those numbers or anything I could change up right away on the motor to make it a bit stronger running.
Oh and I did a compression check and it's sittin right around 8:1