Hey guys I'm trying to get some replacement swim steps for my 02 Cobra open bow. I called Cobra but they don't stick them and can't get them. I don't want to change the brackets so I'm looking for some suggestions thanks

Hey guys I have a77 omega open bow up for sale. The boat has a 460 ford with a jacuzzi yj with energizer kit, droop, place diverter and ride plate. The engine was built two seasons ago. The engine is.30 over with forged speed pro pistons, clevite bearings, stock rods, pro comp heads,  comp cam rockers, weilind intake, demon  carb, and mad electronic ignition. The floor was just replaced last year at Martinez Marine in corona and all the interior but the front seat are in good condition. I started rebuilding the front seat but life has gotten in the way. Has a nice Alpine stereo. Have tile for boat and trailer in hand. Boat had been sitting for a while season since I bought my new boat. Looking to get $6000 obo

Hey I'm looking for the little bracket that goes on the back of the forward reverse shifter that holds the cable. I have a 3 position shifter and the bracket broke when my daughter slammed the bucket up with it locked in reverse. I've tried looking around but don't want to have to buy a whole new shifter. Thanks for the help.

I have a indamar stock 454 in my 02 cobra it's ran until today I was heading into the London bridge and it just died.  Now it will stay for a few sec and run and then just die any suggestion I know it is getting gas so I'm lost now

I picked up a new family ride 2002 21' cobra I'm going to try and make it to big river tomorrow

so I decided to pull my seats out tonight and pull up the carpet and take a look at the floor that seemed off at the end of last season and not to my surprise two huge cracks just in front of the driver and passenger seats and small cracks in the glass all the way down the driver side. Its a 77 omega open bow with quarter stingers and the whole thing seems like it need to be replaced. I am sure I can do it my self but don't know if I want to open the can of worms any more and may just take it to some one so I am looking for some suggestions. I live in Beaumont CA so any where in the IE would be good

Hey guys I'm looking for some input on a possible project boat in looking at its a 21' Caribbean day cruiser with a 455 old that needs work and a jacuzzi wj. Here are some pics

Sent from my XT907 using SoCal Jet Boats mobile app

Hello I'm new to jet boats and looking for a good place to get my jet rebuilt in the IE maybe riverside area. I have a jacuzzi yj with an energizer kit on it and want to get out gone through while I have it out of the boat.thanks for the help

hello I am new to the site and new to the jet boat world but have been checking out the site for a wile and you guys are awesome and always seem to have the answer im looking for. I have a 1977 omega 21 foot open bow with a bbf and Jacuzzi yj with an energizer kit on it. like I said im new to all of this and it took me a lot of research to find out what jet I even had but anyways when I put my boat in the water and put it in forward or reverse it went know where even when the bowl was going up and down when I went from forward and reverse so I gave it a little gas and then it seemed like it slipped into gear per say and I was able to go but so I didn't think any thing of it and it worked fine all day. put it on the trailer and the next day the same thing except this time I was cruising at 3000 rpm's which is usually about 35-40 on gps and I lost all power and was going like 10 mph. my first thought is I sucked something so I looked under the boat and there was a thing that looked like a plastic shoe lace but was about the same diameter as the impeller and wrapped up in it so I pulled it out and started to go again and same problem so now im lost I pulled the bowl off the boat today and nothing in the veins of the bowl or in the impeller so any help would be much appreciated