New hardwood swoop with tray and all the hardware to install
actually comes with setups for both a 4500 series carb and a 4150 series carb.
Bought the wrong one first time around so I have both.

Scoop with two trays and two carb plates.

1977 sanger bubble deck jet boat
460 ford, needs carburetor to be complete
Engine turns over
Bassett headers
Clean hull and clean interior
Engine said to be bored .060 over but not positive, just what previous owner told me
Berkeley jg pump with A impeller and 2 degree wedge with manual place diverter
All cables, steering, throttle, diverter work good
Trailer in good condition, two brand new rear tires on it
$2800
(909)373-7566
Any questions feel free to ask, work most days so text is usually easier but feel free to call also
Pink slip in hand

1991 Canyon open bow jet boat, seats 8
Fresh completely rebuilt 454 .030 with 0 hours on it pushing around 400hp, just broke the engine in, going to take on the water next week, has a 30 day assembly warranty from the builder good until april 29th.
Has a berkeley jet with shoe/top loader/ and ride plate, with hydraulic place diverter. Nice bimini top. The engine sound great has a lot of good parts on it, msd ignition, mallory fuel pump, imco tanks, holley 750 carb, 11qt oil pan, nice aftermarket exhaust. All lights and gauges work. good amount of area for storage. Lots of good parts on this boat.
Just put a brand new front axle on the trailer from pacific trailers in chino, old one went out. New front axle and new bearings in the rear one. Ready to roll.
Asking $11,000 or best offer
(909)373-7566, for more pictures email or text thank you.

I have some spare 454 parts laying around and want to get them gone
Gen v 4 bolt main block, .030 bore
Gen vi 4 bolt main block, standard bore, missing one end cap
freshly turned 10/10 cast crank with new bearings in box
New comp cam in box with set of hydraulic lifters
New Set of cast speed pro .030 pistons in box, with .030 rings in box

$500 for everything, email for pictures or call and come get them.
(909)276-0355 thanks

Looking for a south wind tunnel hull, project or complete, don't really want to spend more than $6k but also wouldn't mind something cheaper that I could build to fit myself. Send me what you guys have thanks.

1991 Canyon open bow jet boat seats 8
Had a 454 in the boat but it threw a rod and was going to build an engine but just don't have the $$ to have someone build right now. But have everything you need to do so.
Boat worked well I paid tags for this year and the stupid muscle tax so its ready to go just needs a 454 dropped in, but I have a block and almost everything you need for a rebuild just needs to be put together.
Has MSD ignition system, mallory electronic fuel pump, full rail engine mounting brackets, two imco tanks, not sure of size i know at least 12, Has nice through transom exhaust worth around $1k.
Holley 750 carb
All gauges work, the pump is a berkeley 12jg-a with shoe and top loader, with hydraulic place diverter that does work, boat has a brand new battery in it. steering is smooth and quick.
 I just put a bimini top on it last year before I blew the engine that looks great and is low profile.
Any questions feel free to call, boat with engine is worth 10k-12k so if you have an engine or know where to get one for a good price you could be set with a nice open bow jet.
Sitting on a nice Hensley trailer that tows really well, and yes I do have the fender not show in picture I had it off
Also does have complete engine cover
The whole boat is there just needs to be put back together
(909)373-7566 call or text for more pictures,
$7500 obo

THE ENGINE**
** I have a mark 5 4 bolt block, crank, rods, brand new .030 pistons and rings, gasket set, 049 heads, new cam, new gasket kit, new timing chain and gears, new harmonic balancer, new oil pump, new rods. Pretty much everything you need to build the engine just needs to be put together, the only thing I know I don't have is the valves.

454 block 4 bolt main- $300
Heads have been resurfaced- $200
Crank- $150
Edelbrock intake- $150
2 oil pans, both 5 quarts, one chrome one black- $50 a piece
Camshaft- $200

Or everything for $600, also have a 2 barrel carb and some valve covers that can go with it.

Text me for pictures or call for info. (909)373-7566

1975 Hondo T-deck Jet hull
Hull has had some fiberglass work on deck from small stress cracks and the rub rail was removed and covered up.
Top half of the boat is primered.
Bottom of the boat is in really good shape.
Has a jacuzzi jet with manual place diverter.
Two stainless steel gas tanks on each side.
Two axle trailer in good condition just will need wiring and lights.
Interior is ok just the wood backings will need to be replaced.
Asking $2000 obo. Make me an offer would like it gone.
(909)373-7566

Pictures here: http://www.performanceboats.com/boats-sale/202586-1975-hondo-t-deck-jet-hull.html

For sale is my 1977 Charger Jet boat.
Has a reliable big block ford 460 and a berkeley jet.
Battery switch
Teak swim deck in really good condition.
This was my first boat and could't of been a better boat but just bought and open bow and its time to move on. Never had a problem with it ran all summer long and would fire right up all day on the water. Perfect starter boat for someone or even just a good reliable jet boat.
Nice 2 axle trailer with working lights all around.
We rewired it so the wires are almost new
Tires are new from this year. Tons of tread and no cracks from sun because I keep them covered when stored.
Currently registered
Give me a call or text (909)373-7566, Jordan
$4500 obo make an offer or trade for jeep, truck, motorcycle

I have been looking at an 82 cougar tunnel v-drive thats about 18-19 ft. I don't know too much on these boats so I need some opinions on it. Stringers and hull are in really good shape. Has a casale drive on it. Has a bit of sun damage from sitting out in the open but other then that the hull is in good shape. What do you guys know about them and what about would it be worth?? Thanks

Looking to buy a 2 axle boat trailer. For a 18-19 ft boat. Show me what you have thanks!