1
Project Boats For Sale / 19' bubble deck
« on: June 17, 2012, 11:48:28 AM »619-871-8084
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
619-871-8084
2
Random Boat Parts For Sale / Wanted 460 bbf distributor
« on: June 06, 2012, 02:29:58 PM »
Hey I have a 1976 bbf 460 and I am in need of a dizzy. The one I took out of the boat is not working at all. I think it is the original part. It was plugged into a Accel Coil. So if you have a extra coil and distributer and want to sell let let me know thank. I am in San Diego County.
3
Boats For Sale / 19' bubble deck
« on: June 06, 2012, 10:00:31 AM »
I have a 19' 76 eliminator bubble deck. It has a bbf 460, high rise manifold, tunnel ram, basset headers, edelbrock carb, just rebuilt the heads and the pump this season. The pump has been completely rebuilt with the full rebuild kit from cpp. I also have a marine stereo deck and speaker that are not in the boat but will come with the boat. The boat also comes with the tandem trailer with new tires. The boat is green and white; the gel coat is in good condition. The seats and carpet are ok one seat pad needs to be re upholstered. boat seats 4. I am in San Diego east coutny. Last trip with the boat was memorial weekend, boat ran great for the whole trip. On Monday brought the boat home and it would not start. The problem is the distributor $250. That is all it needs I can put a new one in if you want to hear it run and take it out on the water. I am only asking $3333 or 3583 with new dizzy. Me and my lady are getting married so cant be having any extra fun for a while till we save up what we need. I love this boat I am the 2nd owner the guy I bought it from was the original owner. It has been garaged just about the whole time and well taken care of. I am not in a rush to sell it but it is for sale. Let me know. I have plenty of pictures
4
Jet Pumps / transom seal
« on: May 21, 2012, 08:50:48 PM »
I just put my pump back into the boat and I am trying to make sure I seal the transom corectly so it does not leak water into the boat. What did was siliconed the gasket to the transom and the gasket to the actual transom also of corse tightened the screws and bolts.
5
Hey there I have a Berkeley 12JB-A and I need a new pump I can get it rebuilt for 1200 or I can get a berkeley 12JC-A does anyone know the diffrence in the pump. The boat the pump is in is a 76 eliminator bubble deck with a bbf460. Just checking my options. I am trying to get thew boat fixed before memorial day. Thanks
Philip
Philip
6
Jet Pumps / Berkeley pump rattle
« on: May 04, 2012, 05:45:52 PM »
Hey every one. I was out on the water today, running my boat making sure it was all good for the river this up coming memorial weekend. It ran fine for most of the day but at the end going back to the launch the boat started to rattle and knock and lost just about all the power it has. It seemed like it was not coming from the engine more the pump. I immediately slowed down and limped it in to the launch. I noticed a good amount of water coming in from the pump area where the drive shaft meets the pump. I went to a local boat shop and they believe it is the bearing and seal I also meet some guy in line at the shop who seamed interested in my problem. I asked him and he seemed to have the same opinion. Once I got home I started the boat up again and for about a 10 sec it sounds fine but then it starts to rattle. Any help or ideas. The motor is a 76 460 new heads and tuned up recently. The pump is old I’m sure its the original its a Berkeley 12JB-A at least that is what I found on the pump the serial number 7559062. Does Berkeley still make parts for this or what do I do. I am in North County San Diego but the boat for the most part is stored in east county, Are there any trust worthy shops around here or people. If it is just the thrust bearing and seal is it something me and a friend can fix. Thanks for reading if you need any other info let me know.
Thanks
Philip
Thanks
Philip
7
Hulls / 1976 eliminator
« on: April 22, 2012, 12:01:42 PM »
hey guys I have a 76 eliminator I am not at my boat and I am wanting to buy a bimini. Does anyone know the width of the boat. I think its 60-67" is that right. Dam I wish I was closer to my boat. Any help would be great. Also if you need more info let me know
8
Engine Mechanical / Electrical / 460 valve job
« on: July 19, 2011, 10:37:23 AM »
Hey guys whats going on? I have a 460 that has the heads off i need a valave job, any good shops in temecula/ san diego area. thanks
9
Engine Mechanical / Electrical / 1976 460 stalls under a load
« on: May 18, 2011, 10:10:34 PM »
Hey whats going on, any and all help would be greatly appreciated. So i bought a boat a few days ago,1976 eliminator ford 460 berkly pump. It runs fine on land both idle and trottled up with h2o hooked up. I to it to the lake today to see how it would run in some real water. It starts just fine, idles fine, but then when i go to give it gas it sputters and then dies. I did mess around mostly trottling it a bit and it kind of became a little more responsive but ultimately died. I have bought new fuel lines and fuel filter, have yet to install them. The gas oil and filter are brand new, the boat has not been run for 4yrs. I am thinking that maybe I need to change the plugs and wires and maybe the carb as well or at least clean the crap out of it. I will be chaning the fuel lines and filter friday. Any ideas.
Thanks
Thanks
Pages: [1]