Show Posts

1

Project Boats For Sale / 77' 19' KONA - ONLY NEEDS YOUR MOTOR

« on: July 29, 2015, 08:49:18 PM »

Hey Guys,

I'M selling a 1977 Kona that's 19'. Has berk pump that's been set back. Complete interior and it comes with the trailer. The stringers and floor are in great shape and it has been really well taken care of. Had an olds 455 in it that I pulled and parts from that are in a seperate post. Pump is a 12je with an a stainless impeller.

Asking $2500 obo --- I need to move this asap to clear space in my garage, so I am fairly negotiable

Rob 760-576-7152

2

Random Boat Parts For Sale / BBO Offy Intake Offy VC Scoop and Hardin logs

« on: July 29, 2015, 08:37:02 PM »

I'm cleaning out the garage and have some parts for sale.

Offenhauser port o sonic aluminum intake manifold BBO $250

Offenhauser aluminum valve covers BBO $150

Polished Scoop $75

Holley red marine fuel pump $75

BBO Rail kit for motor mounting $75

Hardin Exhaust Logs and snails with hoses BBO $100

Ski Tow BBO $50

Rob 760-576-7152

3

Boats For Sale / 1977 KONA 19' WITH BUILD OLDS AND BERK JET

« on: June 10, 2015, 04:20:10 PM »

Selling my 1977 Kona 19' Jet boat. Seats 4+ comfortably. Has olds 455 that has been bored out to a 468. Heres engine build out list.... Comp cams 280H lopey camshaft, spec'd for the specific application, dual timing chain, full roller motor and aftermarket push rods and scorpion roller rockers. All oil return galleys and feed ports have been bored to allow maximum oil circulation, which was a common issue with this motor, compression is 10.5/1 and all work was done by J & J Speed and marine in Ramona. Motor has offenhauser valve covers and quadrajet intake manifold paired with a 850 holley marine carb with spark arrestor and scoop. Has hardin marine exhaust logs and bell housing. Pump is a berkley j12e with an "a" cut stainless impeller. Original gel coat is super clean, the interior is a 8/10. Motor has 56 hours on it since the rebuild was completed, top speed recorded was 62 on gps. Has a CD/AM/FM head unit with 4 speakers that sound pretty sweet. Comes with a set of make your own black 9mm plug Also, some of the guages dont work.

Asking $4500 OBO - or trade for truck of equal value

Robert 760-576-7152 - text is best

4

Cars / Automobiles For Sale / 2004 F250 6.0 Indiglo Flame Gauge Cluster

« on: May 20, 2015, 04:16:34 PM »

Hello,

Cleaning out the garage and have an Indiglo Gauge cluster for a 2004 F250 6.0.

Need to sell ASAP

Asking $200

Rob 760-576-7152

5

Engines / Engine Parts For Sale / BBO Offenhauser Single Pane Tunnel Ram

« on: May 20, 2015, 04:13:18 PM »

Hey Guys,

Cleaning out the garage and have an Offenhauser Single pane tunnel ram for an Olds 455. Been sitting for a little bit and could use a little elbow grease, should clean right up.

Need to sell ASAP

Asking $250 obo

Rob 760-576-7152

6

Engine Mechanical / Electrical / 77 Kona 19' 455 - got fuel but no spark

« on: May 19, 2014, 08:48:18 PM »

Hello Everyone,

I just picked up a new river float and am stoked on the hull and colors. The boat has a rebuilt olds 455 that has been bored .030 over. It's a 77 19' Kona. For some reason I've got fuel but no spark. I've looked at wiring diagrams and have tried figuring it out. Motor will turn over, and Ive got fuel, but no spark. I tried bypassing the resistor, thinking that may be the issue, but that didn't help. Tried different coils, thinking the Mallory one might be bad, but the coils aren't even producing spark. I used a test light to make sure I was getting juice when the key is on. I'm not too sure what I'm missing. The ground to the block is good, and all of the wiring seems to be connected properly and there aren't any cuts or Knicks in the wiring. Any suggestions would be greatly appreciated!! I'm sure it's something simple, but I'm stumped.

7

Engines / Engine Parts For Sale / Olds 455 Edelbrock Performer Intake Manifold --- SOLD

« on: March 10, 2013, 03:03:35 PM »

Hey Guys,

I have for sale an Edelbrock Performer intake manifold for an Olds 455. Painted black to match the rest of the motor. Asking $75 obo. + shipping. I am in Temecula, but frequent Orange County.

SOLD, thanks SCJB!

8

Engines / Engine Parts For Sale / OLDS 455 Garage Sale -- Make offers

« on: May 24, 2012, 10:50:59 PM »

Hey Everyone,

I am just cleaning out the garage and found some Olds 455 items that might be of interest. Here is what I have.....All parts are in Temecula, CA. Buyer pays shipping and will only paypal or cash at pick up. Robert 760-576-7152

Mallory Distributor with optical pick up and plug wires, mallory rev limiter, mallory rev limiter knob, crane cams ignition box xr700, and accel coil 8145C super stock -- $250 for all of it? ---- PENDING SALE

Magged, leak down tested, and mic'd olds 455 KA head, checked out with a clean bill of health -- $65 ----- PENDING SALE

Edelbrock Performer intake manifold, painted black - $120

9

Engines / Engine Parts For Sale / WTB Holley Fuel Pump Needed ASAP

« on: August 05, 2011, 09:40:34 AM »

Hey Guys,

Does anyone have a Holley blue or red fuel pump for sale? I need one as soon as possible. Please let me know what you have and price please....thank you!!

Robert
760-576-7152

10

Topock / Laughlin / River Regatta Aug 13

« on: July 22, 2011, 12:59:24 PM »

Is anyone heading out to the River Reggatta? I will be out there with a couple boats on Mojave from 8/12-8/15 and saturday is the big river float.

11

Engines / Engine Parts For Sale / WTB: Olds 455 Ka heads

« on: June 02, 2011, 06:14:55 PM »

Hello Everyone,

Does anyone have or know of someone that has a set of Olds 455 Ka heads for sale? I actually only need one but will buy both. Anything will help, please let me know.

Thank you!

Robert
760-576-7152

12

Projects / 1976 Kona 21' Project

« on: April 22, 2011, 02:47:00 PM »

Hello Everyone,

It has been a while.....I picked up a new project boat.

But the floor and motor are toast.

Its a 1976 Kona 21' with an olds 455 and Dominator 12-S jet w/hydraulic trim tabs. It has been converted to an open bow with a mid cabin. I couldn't figure out where to start so I pulled the motor and stripped it down. Turns out the motor sat with water in it for a while and there was rust on the side walls and in the heads. The osmossis process had also started on the pistons as well. I brought everything over to the guys at Millenium Motorsports in Temecula and had them evaluate everything. Turns out it was a pretty good build until someone let it sit. H-beam rods, Sealed power high compression pistons, clay smith cam, and is a full roller setup. Thankfully the crank and cam are good to go. But the block needs a bore and hone to .060 over, and the heads need re-surfaced and a valve job as well. Greg @ Millenium has been awesome to work with. He has answered all of my tech and pointless questions and actually took the time to explain the pros and cons of everything. So the motor should be done in about a week or so. The mid cabin had windows in it and was basically pointless because the access hole to the open bow was only 2' X 2'

Since the floor was bad, i decided to start there, while i was at it, I decided to cut the center section of the cabin out to make it a walk through and fiberglass in where the windows where. I am about half way through all of that. I have the floor cut out, thank God the stringer are good and not rotted, and the center section of the cabin cut out. Now its time to get dirty and do some fiberglass work. When thats all said and done it will be time to paint.....I will try to get some progress pics posted, but for now i have the before pics of the boat. Let me know what you guys think. Thanks for reading!

13

SoCal Lakes / Perris this upcoming weekend

« on: August 15, 2010, 08:47:26 PM »

Gonna head out to perris this next weekend and camp there. How are they about your boat being completely dry? I was looking on their website and it said that it had to be completely dry or they wont let you on the lake is that true? Gonna be our first time out there is drinkin okay? We will be in the candy corn boat if any of you are gonna be out there.

14

WTB / MSD ignition box

« on: April 02, 2010, 05:07:07 PM »

Anyone have a MSD ignition box. Preferably a 6a or 6m or better.

Thanks
Rob

15

Engines / Engine Parts For Sale / HELP!

« on: April 02, 2010, 05:06:04 PM »

Hey guys,

So I got a donor motor for the boat so I can get on the water this weekend but my MSD box is shot apparently and the other one I had I sold

. So I need another MSD box. Anyone have one I can buy from them?

Thanks Guys
Rob

16

Topock / Laughlin / Laughlin/Mojave for the 4th!

« on: March 29, 2010, 07:55:38 AM »

Anyone gonna be out there for the 4th? We will be out there at gasoline alley for the majority of the weekend. Also if any of you guys know of any other spots to go out there please let me know. I am always up for an adventure. Just found out I'll have a donor motor next week so we will be out there in the candy corn lookin boat in my avatar.

Rob

17

Engines / Engine Parts For Sale / Weiand Tunnel Ram BBF Polished!

« on: March 22, 2010, 04:41:07 PM »

This is a Weiand Tunnel ram for a bbf 460/429 long block. Set up for dual carb setup but has the interchangeable top. It was just polished and is in great shape. Looking for $275.

Thanks,
Rob

18

Engines / Engine Parts For Sale / BBF 460 Stuff Lower Prices

« on: March 17, 2010, 07:10:37 PM »

Here is a list of what I have that I need to sale. Dont wanna do it but I have to.

D0ve-c heads non ported in good shape w/comp cams springs - $200

Milodon Oil Pan (Gold) I believe its an 8 qt pan front sump. Dirty in pics but will be clean - SOLD

Moroso Aluminum Valve Covers (Gold) - $50

460 Block Casting D1ve bored .030 over (needs a honing, other than that in good shape) - $100

Weiand Tunnel ram w/interchangeable top polished(set up for two 4bbl now) - SOLD

Comp Cams Camshaft #34-331-4 Specs: http://www.compcams.com/Cam_Specs/CamDetails.aspx?csid=989&sb=2
Also have double chain timing set with harmonic balancer for it as well. - $100 for all

Ford crankshaft 2y (needs one of the rod journals polished) Internally balanced - $30

MSD Ignition Box MSD 6A - SOLD

MSD Coil Blaster 2 $30

Pm me on here or feel free to give me a call 760-576-7152 Robert

19

Engine Mechanical / Electrical / Ford 460 D1ve

« on: January 20, 2010, 11:01:46 AM »

Hey Guys,

Its been a while since Ive been on here. The engine has been down since June last year. I finally got some money together to get her going again and I'm trying to figure out what route to go and need your guys' opinion. The block is a 460 with casting # D1VE its currently bored .030 over and is going to need bored/honed/magged to work again. Is the block worth salvaging or should I look into getting a new block or motor all together. My dumba$$ also managed to throw away the stock rods and pistons

. I was figuring that if it is a good block and worth salvaging that I would probably get a decent set of h-beam rods and decent pistons (unless it would be a waste of money). I know the motor is going to put out any crazy hp. Im not running a blower or charger or nos so would the h-beams be necessary? Thanks for any input.

Robert

20

Engines / Engine Parts For Sale / Offy tunnel ram and race demon carb

« on: May 21, 2009, 04:24:57 PM »

I have a offy single carb tunnel ram and a 950cfm race demon carb with a fresh rebuild from dave @ fuel curve west. Was planning on putting this on my 460 however due to the motor being blown i need the money to rebuild it. It was set up for a ford 468ci. Asking $550 obo. The scoop pictured is not inclued...sorry Please feel free to call me at 760-576-7152 rob

21

Engine Mechanical / Electrical / Blew the head gasket today Need Help!!

« on: May 17, 2009, 05:15:49 PM »

Do i need a marine application water pump? Or can i just pick up a new water pump from pep boys/napa? Also do you guys know the bolting sequence for the headers? I could really use some help on this one fellas...thank you.

22

WTB / Rudder for a JC pump

« on: May 14, 2009, 10:31:36 PM »

Hey guys i was just going to see if anyone has a rudder for a jc pump they are willing to sell or possibly "donate". I am located in Temecula but end up in riverside/o.c. area quite often. Thanks!

23

Topock / Laughlin / sanbars in laughlin?

« on: May 04, 2009, 07:50:11 PM »

Are there any sand bars in laughlin that people party at?? So far I have only found prudential rock and gasoline alley but its all rock. Was hopefully lookin to find a chill sand bar out there

24

Engine Mechanical / Electrical / rpm's

« on: April 25, 2009, 11:21:54 PM »

Just wanted to see what your guys' input is on this....When i flatfoot the boat i am only at about 42-4300 rpms. Its a 21ft with a 460, msd ignition/dizzy, a berk 12jc a pump. I hear most people running closer to 5k rpm's. Is there something that needs adjusting to get more out of it? or is that normal?

25

Audio / pioneer slim 12" woofers

« on: April 24, 2009, 09:25:00 AM »

one is 1200 watts and the other is 1000 watts both in truck boxes. these are pioneer's slim subs. i had both of them hooked up to a 1000 watt 2ch amp underneath the back seat of my chebby and it bumped hard. they are $220 new for each sub and box. Asking $200 for both or $120 a piece. Selling because i haul my daughter around (6 months) and dont ever get to use them.

Topics - bertus