Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - ironman

Pages: [1]
1
Boats For Sale / 75 Tahiti
« on: April 04, 2009, 02:13:41 PM »
This is my 75 Tahiti completely rebuilt 3 years ago. Every thing was stripped out of the boat including all the old rotted wood, interior, old motor, and all the other stuff that needed to go. Every bit of old rotted wood was replaced with new and was re glassed in, the stringers, sub floor, transom, and the bulkhead are on that list. Boat runs very well and gpsd at 71 mph. Interior, paint, motor, and pump were all new less than 3 years ago. Has a new bimini top for shade on those hot summer days. I have all receipts. Here are some specs on the motor, pump, and the rest of the boat.

Motor:

Gen V 454 BBC 4 bolt (all gen v bocks were 4 bolt main), Forged flat top pistons .020 w/ stock rods with ARP wave lock rod bolts, Compression approx 9.8:1 Runs great on 87 octane fuel, New SCAT forged steel crank (stock stroke), Total Seal rings, Clevite bearings, Comp Cams Extreme Marine 278 cam, Comp Cams true double roller timing chain, Melling oil pump, New SPI balancer, SFI approved flex plate, Rotating assembly balanced, Custom Built 10 qt oil pan. Motor sits on a custom built rail kit.

Heads:
Early closed chamber large oval BBC, Fully ported and polished, Large S.S.Valves, Comp Cams springs and retainers, Comp Cams 7/16 pushrods, Scorpion aluminum roller rockers rated for 800lb spring pressure

Fuel Delivery:
2 Custom built Stainless Steel 11 gal ea saddle tanks with senders in both tanks
Mallory comp 140 electric fuel pump, Mallory bypass regulator w/ liquid filled pressure guage, Holley 850 DP that sits on top of an Edlebroc Victor JR that has been port matched to the heads. Hei dist w/ hi output coil

Pump:
Berkeley 12 JC w/an”A” aluminum impellor, Dominater split bowl, AMT droop, Manual place diverter w/ FTN

Electrical:
Optima yellow top batt, 100 amp chrome 1 wire alt, Hi torq mini starter, Autometer white face marine gauges, all new wiring through out, Kenwood stereo, four 6-1/2” speekers, 8” powered marine bazooka bass tube

I have over $ 10,000 invested in this boat but I am only asking $6,000 OBO.Needs nothing ready to go No Trades need the $$$ If interested please call 559-903-5456








2
Random Boat Parts For Sale / Rail Kits BBC, SBC, 460 FORD, 455 OLDS
« on: March 01, 2009, 06:27:57 PM »
These are brand new rail kits for sale. Motor plates are 26" wide but I can cut them wider if needed.

Basic kit includes the following:  front and rear motor plates, 2-1/2 x 2-1/2 x 1/4 aluminum rails that are 48" long, 2-1/2 x 1/4 aluminum backing plates 48" long and 4 mounting blocks. Price for the basic kit is $400.00  INCLUDES FREE SHIPPING....

Complete kit comes with flywheel cover, drive line guard, and a pump brace. price for the complete kit is $550.00  INCLUDES FREE SHIPPING.

I can also offer custom machining to your specifications on all rail kits

Thanks guys,

Billy (Ironman)








3
Test / test
« on: March 01, 2009, 06:25:54 PM »

4
Central Valley / Proppys test and tune
« on: February 28, 2009, 06:47:43 PM »
  Thats right fellas, propless is finally goin to get the Eliminater wet tomarrow (feb 29th) .I am draggin my sled up there as the safty boat.  We should be up at Pine Flat around 11:00 am , lets hope for some clear skys ( it might rain) and hope that biatch floats  ;D I will make sure to take the cameras and lots of pics ( for proof) and some vids. Wish Proppy luck he might need it.....

Ironman

5
Central Valley / Pine Flat 6/07/08
« on: June 06, 2008, 05:48:48 PM »
There will be a few of us jetters out there this weekend hanging out around sycamore (sp)so stop in and say hi.. Look for my boat

6
Random Boat Parts For Sale / Intake Loader Grate for JC, JG
« on: May 31, 2008, 01:03:28 AM »
These loaders fit Berkeley JG, JC, and some other pumps as well. I have the same one in my boat and it works very well. This one is for Propless ( Don't worry Jeff I am not sellin yours ;D ) but I have 4 more just like it. The main structure is made from 1/4 A36 plate and the fins are made from 1/8 A36 plate. All pieces were cut on the waterjet, assembled and welded. The 4 attaching holes are for 5/16-18 flat head socket screws ( NOT INCLUDED ). It is recomended that the the 4 bolt holes that are in the intake be drilled thru and tapped for 5/16-18 x 1-1/2 steel flat head socket screws and 5/16 loc nuts be used to attach the loader to the intake. Comes primed and ready for the finish of your choice.

Price is $125.00 plus shipping

Thanks
Billy
BDS Machining 559-903-5456






7
Test / test
« on: September 08, 2007, 12:21:22 AM »
here ya go

Pages: [1]

Null

SMFPacks CMS 1.0.3 © 2026