Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Hardcore1

Pages: 1 ... 3 4 [5] 6 7 ... 15
101
Engines / Engine Parts For Sale / Re: 4 BBC intakes rectangle Brodix Profiler Edelbrock + Oval Weiand +1050, 1350 Dom
« on: January 18, 2019, 08:44:04 AM »
Hi Swain sorry this post is 2 years old and all these manifolds are sold

I can get you a new one is its what you need  :thumbup:

102
Engines / Engine Parts For Sale / HARDCORE BBC 524ci Blower engine 800+HP $12,500
« on: January 16, 2019, 07:09:51 PM »
BBC 524ci blower Complete engine fully assembled, blueprinted & dyno'd(dyno is 1/25/19 and estimated 800+HP)

NOTE THIS ENGINE IS BEING ASSEMBLED OVER THE NEXT WEEK  PICS WILL BE UPDATED AS I GO, YOU ARE WELCOME TO COME TO THE SHOP AND CHECK OUT PROGRESS!!!

Block GM 502....block was bored and honed with torque plate, square decked and align honed with ARP stud kit
Crank is a GM forged 4" stroke...crank was polished STD/STD on the mains and rods then heat treated and balanced
Rods are NEW Manley 6.385 long
Pistons are Racetec and flat tops with Total Seal TNT ring pack
Bearings are Clevite H series
Canton 10QT oil pan with HV oil pump
Comp custom cam and Comp limited travel lifters
Comp 3/8 moly push rods
Polished Brodix BB2 Plus heads ported and custom built by us at Hardcore
ARP head bolts
Fel Pro MLS head gaskets
Crane Gold roller rockers 1.7
Polished Blower shop 8/71 blower with teflon seals(rebuilt at Maddog Blowers)
Quick fuel polished 850 blower carbs with Enderale linkage and SS fuel lines
Polished finned dual air scoop
MSD distributor with MSD wires
Pro Race SS damper with ARP bolt

$12,500

We can take your old motor in trade running or not!
[/size][/size]
Call or text Andy at Hardcore Racing at Marine Engines
909 851 8251

103
Engines / Engine Parts For Sale / BBC 468ci NEW Gen VI engine 525hp Comp Cams Hyd Roller Extreme Marine cam
« on: January 16, 2019, 05:18:02 PM »
BBC 468ci marine engine just built here at Hardcore Racing & Marine Engines....built strong with a budget in mind....its estimated at 525hp

Specs
Gen V block bored and honed
New Eagle crank
New K1 4340 forged I beam rods with ARP bolts
New Icon forged domed pistons CR 9.35:1
New Mahle moly rings
Comp Cams hydraulic roller extreme marine cam 242/248-112
Lunati hyd roller lifters
Comp Cams billet timing set
Polished timing cover
GM 8 qt oil pan
Melling HV oil pump
Fel Pro head gaskets
Ported 088 heads with new stainless steel valves and Comp springs
PRW stainless full roller rockers and 3/8 push rods
Pro Products polished intake (vic jr style)
Holley Brawler 850 DP carb
Pertronix distributor with MSD wires
Polished tall marine valve covers

We can trade in your old core in running or not!

$6250 $500 off season project starter $5750 :thumbup:

Call or text Hardcore 909 851 8251

104
Engines / Engine Parts For Sale / 2x CARB SHOP Blower 850 holleys chrome bowls stainless fuel lines and linkage
« on: December 24, 2018, 03:40:42 PM »
2x Carb Shop blower 850 holley carbs with boost enrichment circuits, carbs come with stainless fuel lines, chrome bowls and dual linkage

$1000

105
Engines / Engine Parts For Sale / SBC Vortech ported Edelbrock heads with Marine power MPFI intake and Crane cam
« on: December 23, 2018, 03:44:26 PM »
Complete SBC Vortech top end kit, great to upgrade your Mercruiser engine, this package should pick up up to 100HP

Heads are Edelbrock 170cc ported with fresh valve job and re-surfaced and assembled ready to install
Intake is a Marine Power single plane with 750TB and comes with injectors and rails
Crane Hyd Roller cam and lifters to suit heads and intake
MSD SF distributor

$1600

106
Engines / Engine Parts For Sale / Re: Ford 429-460 Factory 4 bolt
« on: December 18, 2018, 07:37:54 AM »
PM sent  :thumbup:

107
Engines / Engine Parts For Sale / Re: B&M mega blower and superchiller
« on: December 18, 2018, 07:35:58 AM »
PM sent  :thumbup:

108
Engines / Engine Parts For Sale / Re: Big block chevy roller rockers
« on: December 18, 2018, 07:33:18 AM »
PM sent  :thumbup:

109
Engines / Engine Parts For Sale / Moving to Havasu sale BBF 527 BBC 598 &468 LS 440 all engines reduced $500-2000
« on: December 06, 2018, 01:34:13 PM »
Hardcore Racing & Marine Engine is moving to Havasu in Jan 19 so were having a big engine sell, we have 4 Engines all reduced $500 to $2000 so don't miss out grab one quick!

1) BBC 468ci 525HP Eagle crank, K1 forged I beam Rods, Icon forged pistons, 8 Qt pan, Ported 088 rectangle port heads with SS valves and springs to suit Hyd roller Comp Cams Extreme Marine cam 242/248-112, Pro Products polished intake with 850DP Holley Brawler carb                                     $5500 reduced $500 to $5000

2) SOLD
BBC 598ci dyno'd at 961HP 785LB/FT, Dart tall deck block 4.600 bore, Lunati rotating with Racetec 2918 pistons and Total Seal rings, Custom Comp Roller cam 285/300-115, Cloyes T/Cover with built in thrust button, Canton 14qt oil pan, ATI chrome damper, Jesel DLC coated lifters, Manton push rods, Jesel rocker shaft, Edelbrock Musi/Victor CNC heads 366/377cc, Dart tunnel ram ported to match large Musi ports, 2 x Dominators Gen 3                          $16,950 reduced $2000 $14,500

3) SOLD
Ford 527ci Dyno'd at 604HP 630LB/FT, Eagle rotating assembly with Icon forged pistons, Canton Pan, Comp custom Extreme Marine Hyd roller cam 262/266-112, Lunati Hyd Roller lifters, Comp 3/8 push rods, Crane Gold rockers, Trick flow 460 heads, Weiand Steath intake, Demon 950 carb  $6,950 reduced $1000 to $5950

4) SOLD
LSX 440ci Dyno'd at 640HP Dart block, KI rotating assembly with racetech 4032 pistons and total seal rings, Autotec oil pan, Crane cam 245/254-112, Comp Cams link bar lifters, Hinson C7R chain, Melling HV oil pump, Trickflow CNC 245cc heads, Comp 1.7 full roller rockers, MSD intake with Fitech TB, Trickflow 62lb injectors
                                                                   $13,500 reduced $1500 to $12,000

110
Engines / Engine Parts For Sale / Re: All the good stuff
« on: December 04, 2018, 11:01:03 AM »
Quote from: Jet Boat Maloney on November 29, 2018, 09:39:59 PM
Two 750 CFM Quick Fuel Marine carbs. Weiand BBC square port tunnel ram. With scoop. Fuel lines and linkage
1000.00 OBO for everything

PM sent  :thumbup:






Sent from my iPhone using SoCal Jet Boats mobile app

111
Engines / Engine Parts For Sale / Re: BBC Victor Ram 2R tunnel ram freshly polished
« on: December 04, 2018, 10:52:08 AM »
SOLD

112
Engines / Engine Parts For Sale / Re: BBC 4 Bolt block
« on: December 04, 2018, 10:51:01 AM »
Quote from: Rev4Q on December 04, 2018, 08:42:35 AM
BBC 445 4 bolt block, baked, blasted all plugs removed. Fresh .060 bore Bored and honed on Rottler cnc
 Has not been sq decked, was gonna be a 496 that didnt happen.  500.00

PM sent  :thumbup:

113
Engines / Engine Parts For Sale / BBC 468 complete NEW Hyd Roller engine 525hp carb to pan $5500
« on: December 01, 2018, 07:27:59 AM »
BBC 468ci marine engine just built here at Hardcore Racing & Marine Engines....built strong with a budget in mind....its estimated at 525hp

Specs
Gen V block bored and honed
New Eagle crank
New RPM 4340 forged I beam rods with ARP bolts
New Icon forged domed pistons CR 9.35:1
New Mahle moly rings
Comp Cams hydraulic roller extreme marine cam 242/248-112
Lunati hyd roller lifters
Comp Cams billet timing set
Polished timing cover
GM 8 qt oil pan
Melling HV oil pump
Fel Pro head gaskets
Ported 088 heads with new stainless steel valves and Comp springs
PRW stainless full roller rockers and 3/8 push rods
Pro Products polished intake (vic jr style)
Holley Brawler 850 DP carb
Pertronix distributor with MSD wires
Polished tall marine valve covers

We can trade in your old core in running or not!

Call or text Hardcore 909 851 8251

114
Engines / Engine Parts For Sale / Re: BBC Victor Ram 2R tunnel ram freshly polished
« on: December 01, 2018, 07:23:22 AM »
Quote from: CoolUrJets on November 30, 2018, 06:08:05 PM
Would you ship to 98597 Washington State? I’m interested for the right price.

Yes shipping would be $30

call or text Andy 909 851 8251

115
Engines / Engine Parts For Sale / Re: 598ci BBC complete dynod engine 961hp on pump gas!
« on: November 19, 2018, 04:27:26 AM »
Bump

116
Engines / Engine Parts For Sale / Re: BBF 527ci dynod at 604hp
« on: November 19, 2018, 04:25:19 AM »
Winter special $6950

117
Engines / Engine Parts For Sale / Re: BBC 502HO complete turnkey engine with Edelbrock dual quad 500+HP Hot Rod motor
« on: November 19, 2018, 04:23:58 AM »
Price reduced $5250

118
Engines / Engine Parts For Sale / Re: BBC Merlin OVAL ports heads completely PORTED & machined & matching Victor JR
« on: November 19, 2018, 04:21:32 AM »
Price reduced $1600

119
Engines / Engine Parts For Sale / Re: BBC Merlin 310cc rectangle port heads new springs, valve job, surfaced, ported
« on: November 11, 2018, 07:11:33 PM »
Quote from: bobjthomson on November 09, 2018, 06:12:32 PM
Andy’s a cool guy


Sent from my iPhone using SoCal Jet Boats

Thx BT  :thumbup:

120
Engines / Engine Parts For Sale / Re: BBC Merlin 310cc rectangle port heads new springs, valve job, surfaced, ported
« on: November 11, 2018, 07:10:23 PM »
Quote from: aquaholic72 on November 09, 2018, 12:53:38 PM
Yessir,,  he ordered me up a custom grind solid roller cam as well,  just waiting for the cam to come in so I can go pick it all up!!  Andys a cool guy if you guys ever need anything!! 

your friendly local v-drive owner

Cam was ground and shipped Friday Aqua and will be here tuesday, TY for the cool guy! i like to help :)  :thumbup: :thumbup: :thumbup:

121
Engines / Engine Parts For Sale / SOLD!
« on: November 08, 2018, 10:30:56 AM »
SOLD!

122
Engines / Engine Parts For Sale / NEW SBC BBC MSD 8366 EFI distributor (mercusier replacement of the GM EFI)
« on: November 04, 2018, 01:11:34 PM »
NEW SBC BBC MSD 8366 EFI distributor (mercusier replacement of the GM EFI)

$200

123
Engines / Engine Parts For Sale / BBC GEN V/VI marine oil pan 12qt with windage tray and oil pick up
« on: November 04, 2018, 01:03:14 PM »
BBC GEN V/VI marine oil pan 12qt with windage tray and oil pick up, pan is just over 10" deep

$250

124
Engines / Engine Parts For Sale / BBC Tall Deck complete fuel injection set up on modified Dart tunnel ram
« on: November 04, 2018, 01:00:30 PM »
BBC Tall Deck complete fuel injection set up on modified Dart tunnel ram, rectangle port!

Comes with:-
Intake with 8 NEW Holley 62lb injectors, rails, TB and filter
Complete wiring loom with all sensors and cylinder head mount box
GM EFI distributor with new cap
MSD coil NEW
MSD 6L-2M NEW
MEFI ECU set up with 820HP tune(its not locked so tunable for any application
SX fuel pump with SX filter & reg

Everything $2750

125
Engines / Engine Parts For Sale / BBC Victor Ram 2R tunnel ram freshly polished
« on: November 04, 2018, 12:51:04 PM »
BBC Victor Ram 2R tunnel ram freshly polished with adapters to turn carbs side ways, intake has not had any portwork so will work on stock heads with center bolt as well as any aftermarket heads

Quick sale $600

Pages: 1 ... 3 4 [5] 6 7 ... 15

Null

SMFPacks CMS 1.0.3 © 2026