Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - enginedoctor

Pages: 1 ... 42 43 [44] 45 46 ... 65
1076
The No Wake Zone / Re: CALIFORNIA...."A FAILED STATE"
« on: October 07, 2009, 09:30:21 PM »
GT... One friend of mine is in Port Orchard...U know where that is??

He just complains of too much rain & depression...Sht I love the rain  ;D

1077
The No Wake Zone / Re: CALIFORNIA...."A FAILED STATE"
« on: October 07, 2009, 09:04:02 PM »
GT.    I have friends in Oregon, they love it, just rains to much.
but...How will u make 150k a yr. out there  ???
Unless you start ur own biz.

1078
Engine Mechanical / Electrical / Re: NO OIL PRESSURE... BBF
« on: October 07, 2009, 08:59:01 PM »
Quote from: GT Jets on October 07, 2009, 08:53:55 PM

Just throw some 290 wt oil in it and let it roll......, maybe a bucket or two of axle grease..   :thumbup:


I did one in about 1999 that was missing the center cam bearing....Not spun...MISSISNG. LOL..

GT

Yo GT.    Don't forget to add sawdust to the mix...Lots of it  :sly:
The guy paid  4K.  :thumbdown:

1079
Engine Mechanical / Electrical / NO OIL PRESSURE... BBF
« on: October 07, 2009, 08:49:45 PM »
Fresh rebuild 460 Ford...
Guy brings it in... Local shop that built it , blew him off..said improper break in  :screwy:

Upon my t/d & inspection... I find the crank to be .030/.030  with std. rod & main bearings installed :banghead:

So much for blueprinted assemblies....Oil clearances were over  .015 thous. across the board  :thumbdown:

Yaaa blame the poor customer  :thumbdown: :thumbdown: :thumbdown:

1080
The No Wake Zone / Re: CALIFORNIA...."A FAILED STATE"
« on: October 07, 2009, 07:22:33 PM »
I like the  " CALIFUCKYA "

Whatta way to ruin this state  :thumbdown:
Guess it's time for Ca. residents to choose between
Fight or Flight :sly:

1081
Engine Mechanical / Electrical / Re: no top end oil
« on: October 07, 2009, 07:03:24 PM »
Anyone trying to fire any engine without priming is   :thumbdown:

1082
The No Wake Zone / CALIFORNIA...."A FAILED STATE"
« on: October 07, 2009, 11:44:14 AM »
Today's channel 5 news:

California, "1st. state of the union to fail."
1.  10 percent unemployment and rising
2.  1 out of 4 homes lost due to foreclosure
3. homeless climbing daily.

Is it time to leave Ca. as so many are doing.
This may be a great place to live...but if there is no economy, why stay  ??? ???

Whata you think :-\

1083
Arcade / Re: nsfw game
« on: October 06, 2009, 06:47:57 PM »
ok.   I am convinced, u guy's don't like girls   :thumbdown: :thumbdown:

1084
Engine Mechanical / Electrical / Re: no top end oil
« on: October 06, 2009, 06:41:58 PM »
Quote from: GT Jets on October 06, 2009, 05:43:12 PM
You need the body of the old dizzy in there like E.D. says  ;D

The oil gets to the top of a BBC by way of the passages in the distributor hole and the body of the distributor blocks off the levels in the block...

Use the body of the dizzy you used to make the shaft (I assume you just ground the gears off of the gear). I welded a 3/8" drive deep socket to an old Delco distributor and just gutted the points plate and mechanical advance off of it...Works like a charm with a 1/2" drill. I have never, ever seen a BBC take more than 30-40 seconds to see oil at the top turning the pump at about 900RPM...Never...Did I say never?  ;)

GT
  I agree!

1085
Engine Mechanical / Electrical / Re: no top end oil
« on: October 06, 2009, 03:46:27 PM »
Quote from: motorhome6 on October 06, 2009, 03:42:37 PM
I should have said it is a BBC motor. The priming tool I made from a dist shaft ,I got from a dist ans welded an extension to it . I don't really know what a store bought one looks like but assumed it would look like mine. I will go and prime some more and rotate the motor to open any passages that might be blocked. thanks for everyones info I will let u know what happens and if you have any more ideas ,I'm open to them. . If my priming tool isn't made right to do the job please let me know ,also
                                                     
                                                              thanks everyone
                                                                 motorhome 6 

YOU NEED TO EITHER USE AN OLD DIST>> OR THE CORRECT PRIMING TOOL   :)

1086
Arcade / Re: nsfw game
« on: October 06, 2009, 12:04:23 PM »
 :o :o    ROAST BEEF!...OMG ! :o :o :o :o :o :o :o  #996   :banghead:

1087
Engine Mechanical / Electrical / Re: no top end oil
« on: October 06, 2009, 11:24:37 AM »
Quote from: jet boat performance on October 06, 2009, 08:47:24 AM
The oil flow to the upper end is verylimited by comparison it takes an nenormous amount of thime to get it to the top with a "primer" Tom

Tom..I gotta humbly disagree with ya here   ;D

1. Chevy...Clockwise
2. Ford... Counterclockwise

Assuming you are using the correct priming tool....The top end will pump up in a matter of 2 or 3 minutes!   Unless there is an assy problem.
What you need to do is rotate the engine over 90 degrees a couple of times so that all oil passages
in the cam tunnel will open and feed the top end  ;D

1088
Arcade / Re: nsfw game
« on: October 05, 2009, 02:53:45 PM »
 # 993   :o :o

1089
Engines / Engine Parts For Sale / Re: 454 Crank and Rods
« on: October 04, 2009, 11:49:25 AM »
Can't believe u still got that stuff  ???

1090
Engines / Engine Parts For Sale / Re: FS: BBF 460 DOVE-A Heads
« on: October 03, 2009, 12:15:34 PM »
 :thumbup:

1091
Boat Showcase / Re: Caribbean
« on: October 01, 2009, 09:23:54 PM »
WTF is he thinking? 

2 Sav ...Call Me!

1092
Boat Showcase / Re: Caribbean
« on: October 01, 2009, 09:13:46 PM »
Wanna trade ???

Bad azz Boat u have... I luv it!

1093
The No Wake Zone / Re: Happy B-Day !
« on: October 01, 2009, 09:05:25 PM »
Quote from: pw_Tony on October 01, 2009, 08:51:35 PM
LOL, happy b-day bro! What's the magic age today?

I Forgot ;D

1094
The No Wake Zone / Re: Happy B-Day !
« on: October 01, 2009, 09:04:05 PM »
Mark.  :sly:
Wanna talk to the girls  :thumbup:

By the way I will have a special person here to see me soon.... Shhhhh :)

1095
The No Wake Zone / Re: How Stupid Can I be??
« on: October 01, 2009, 09:00:22 PM »
Uhuh    :mad:

Brain fade :thumbdown:

1096
The No Wake Zone / Happy B-Day !
« on: October 01, 2009, 08:46:26 PM »
Happy B-Day to me...9/30. :thumbup:

Hot tub party still going on ;D

1097
The No Wake Zone / How Stupid Can I be??
« on: October 01, 2009, 08:42:18 PM »
I had about 4 gall. of old fuel.... Decided to add it to my SS El Camino as I  did not know how to dispose of the fuel.

Fkn. sht. fowled out  my whole fuel system.....and Ign.   Stupid is ... as stupid does...  Bad choice, DUH :thumbdown:

Yoe see, I make mistakes too :screwy:

1098
WarZone / Re: Cat won't eat ?
« on: September 28, 2009, 04:43:22 PM »
Hey Tom....

Cats are much like people..they donot like change, it stresses them out.That is why he is not eating.!

They have different personalities as well. Check out their body language for clues as to what they want/need.

IMO...Give the cat time to adjust or get another cat to take it's mind offa his problem.

I have a girl-friend that has a cat that has cancer, and she is stressed over it.
Cat's are great company and need to be happy too :)

1099
Engine Mechanical / Electrical / Re: Keith Black forged pistons 460
« on: September 23, 2009, 07:08:34 PM »
I don't use them...so donno:

One thing I can say is I hate coated piston skirts....You cannot get a piston to wall measurement ::)

1100
The No Wake Zone / Re: ethanol?
« on: September 23, 2009, 07:05:25 PM »
From what I have read....I think you can run more compression  ???

Gotta modify fuel system as well  ???

Pages: 1 ... 42 43 [44] 45 46 ... 65

Null

SMFPacks CMS 1.0.3 © 2026