Show Posts

1151

WTB / Scoop mounting plate kit

« on: February 21, 2009, 05:42:34 PM »

something like this , used is fine as long as its complete
http://www.jegs.com/i/Goza/460/GZR1203/10002/-1

1152

Boat Showcase / Re: Eliminator

« on: February 21, 2009, 01:56:09 PM »

Quote from: 1980Nordic on February 21, 2009, 07:38:34 AM

guys i wanna say he is probably backing the boat into the river and keeping it on the trailer....but maybeeeeee if the water is high he will do a river test, besides there is always katherines landing...GOOD LUCK STEVE

You are correct lil buddy

2 weeks it will go up to Katherines....

Oh ya..............it runs bitchen

gotta fix a couple leaky fuel lines and she should be good to go...........

1153

WarZone / Re: New hod rod showed up today

« on: February 20, 2009, 07:29:54 PM »

I dont see no Chebby symbol

I give...... What is it.

1154

Boat Showcase / Re: Caribbean

« on: February 20, 2009, 07:09:35 PM »

Quote from: Brad @ SoCalJetBoats.com on February 20, 2009, 07:04:47 PM

dont make me go dig up quotes from when you were a proud ford owner....

Um..Um..Um , were not living in the past its all about the future.. We all do stupid things when we were young

Besides , i have grown up since then and i know better now

i think

1155

Boat Showcase / Re: Caribbean

« on: February 20, 2009, 06:59:06 PM »

Quote from: 76NORDIC on February 20, 2009, 06:54:15 PM

Hey 2Sav ..... the Dizzy is at the wrong end of the engine..... thats your whole problem....

Oh shit your right

Well i guess i better flip the engine around and make it a V-drive

Silly Ford boys

1156

Boat Showcase / Re: Caribbean

« on: February 20, 2009, 05:15:27 PM »

Thanks guys

Quote from: boost on February 19, 2009, 05:51:13 PM

Looks like you have enough cable to go around the back of the carb.

Ok now when i got home from work this morning i checked and it will fit

But that leads to a problem, No place to hook it up on the throttle....

But i have a parts carb , and it has the part i need.. Just need to clean it up really good.

Now that i have been looking, i think im going to change my carb set up..

What i mean is eliminate the regulator and just run a fuel log, and eliminate the riser or whatever you call it..

I was looking at Jegs for a scoop mount, and would need to eliminate this stuff anyways.
http://www.jegs.com/i/JEGS/555/55015/10002/-1

It would make it sit alot stronger with the scoop mount.....

So i think i will let this stuff go..

1157

Boat Showcase / Re: Eliminator

« on: February 20, 2009, 03:28:45 PM »

Well as of right now, all i have left to do is a little silicon around the bowl, add oil & filter and some new plug wires..

So tomorrow is the big day, im gonna fire this pig.......

the womans getting mad cause i work on his boat ALL day, and then go work on mine a bit

I cant wait till i can just relax on the beach

1158

Boat Showcase / Re: Caribbean

« on: February 19, 2009, 06:18:18 PM »

Quote from: boost on February 19, 2009, 05:51:13 PM

Looks like you have enough cable to go around the back of the carb.

Ok now you got me thinking, i just might have enough...

i will see tomorrow

1159

Boat Showcase / Re: Caribbean

« on: February 19, 2009, 05:30:37 PM »

Quote from: boost on February 19, 2009, 05:22:43 PM

Look'in good Steve who's doing the painting on the scoop? by the why the fuel line would be a cleaner setup if you got rid of the bend going into 90 on the carb,just my o2 bad ass bro.

Thanks... I have a friend that paints cars , but im gonna try it with some Duplicolor

If it dont work he will do it

Yes the fuel line was set up for a elect pump to feed from the rear, i went mech and have not changed it yet i will it bugs me too

1160

Boat Showcase / Re: Caribbean

« on: February 19, 2009, 04:12:26 PM »

Quote from: IRRebel on February 14, 2009, 11:12:13 PM

And, the scoop has to be crooked, at least I hear that's why Omar's always able to make the water................

Ray

Well if my scoop is crooked, we got a problem

Looky at what i got in the mail today..
My new scoop, and V/C's

V/C's are not what i thought they would be, i was thinking they were engraved..... Thought wrong, some kinda crap on them when i scracth the letters they come off so i am going to try some acetone and get that cheapo crap of my shiat..
now for the scoop, the ole lady says i have to paint it with every color of the boat, im thinking black or beige..

What do you guys think it should be painted like.

Seriouse answers only

well that just knocked out about 80% of you clowns

1161

Jet Pumps / Re: Header injection

« on: February 19, 2009, 10:15:22 AM »

Quote from: Luckie Stiff on February 18, 2009, 08:08:04 PM

Steve-

If you've got an extra $300 laying around doing nothing, then buy the Banderlog valve, I personally think they're way too damn much money, I run a metering valve up at my seat, controls the header water to the Bassett T. Boats have been set up this way for a long damn time with no problems, save your $$$

Well thanks for the heads up , i will just go ahead with what my original plans were and thatis exactly what you have..

No i dont have the extra $$ , but i figure my FIL OWES ME

Thanks............

1162

Engines / Engine Parts For Sale / Re: Mickey thompson V/C

« on: February 18, 2009, 07:00:38 PM »

Quote from: motorhome6 on February 18, 2009, 06:46:02 PM

do you still have the M T valve covers for sale?

In short.

YES

And i also have a set of Hardin marine V/C's for a bbc

1163

Projects / Re: SCJB whore

« on: February 18, 2009, 06:56:00 PM »

Bro ham...........

Looking good

its nice to know somebody will have tools when my shit breaksdown

Or does that red "tool box" just hold beer

1164

Jet Pumps / Header injection

« on: February 18, 2009, 06:52:13 PM »

Soooooo ive been doing alot of thinking about getting the boat done right the first time, Im tired of it sitting on a trailer and not beached at the river/lake.. So i have been looking into this Banderlog injection and it seems to be fool proof and thats what i need..

How many peeps are running them and how are they working for them..

I will probably get one for the Eliminator aswell...

One less thing he could phuck up right

I figure by the time i get the lines, fittings run a valve to the front seat, buy a rebuild ball, spring for the bassett t valve and so on. Im halfway there of buying a Banderlog

What do you guys think ??

I like simplicity Banderlog Yes or no

1165

The No Wake Zone / Re: what do you do

« on: February 18, 2009, 04:31:36 PM »

Quote from: GlassCutter on February 18, 2009, 04:21:48 PM

OUCH !

Even went he is at one of the low points in his entire life, the dude still has the strength and good character to smack 2sav right in the jimmy. Well played Blackbeard.

J/K 2sav but you gotta admit you left yourself open for it

Yes i know, I guess i didnt think about it as usual..

Comments deleted

1166

Jet Pumps / Re: Pressure releif valves

« on: February 18, 2009, 03:59:34 PM »

Quote from: jet boat performance on February 18, 2009, 07:38:30 AM

pressure kit with OB dump under $100

here you go , straight from Tom @ JBP

1167

The No Wake Zone / Re: what do you do

« on: February 18, 2009, 11:45:35 AM »

This is something i have always wanted to do

[yt=425,350]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/V_Y9SQhcIjw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/V_Y9SQhcIjw&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>[/yt]

1168