126
Projects / Re: 82 Eliminator Sprint
« on: March 13, 2015, 12:06:47 PM »
Cool. I was pretty sure that's what you did.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
127
Projects / Re: 82 Eliminator Sprint
« on: March 11, 2015, 08:03:11 PM »
There were really only two that were deep and I ground them down and filled them with mat and resin which should be more than enough. The others were very minor.
128
Projects / Re: 82 Eliminator Sprint
« on: March 11, 2015, 03:04:28 PM »
There were a few stress cracks on the deck. A couple that I pretty much sanded out and two that I had to repair. I'm gonna cover the whole thing with one layer of 6oz cloth and that will prevent them from coming through again. I was told if you do not do this its pretty much a guarantee they will come back.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
129
Projects / Re: 82 Eliminator Sprint
« on: March 11, 2015, 12:03:55 PM »
Making progress. Got the deck and whole top side roughed up. Going to pick up materials today and should be laying up the glass this weekend.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
130
Projects / Re: 82 Eliminator Sprint
« on: March 03, 2015, 07:52:50 PM »
Went past the point of no return today. Started prepping the top half of the boat for a layer of cloth. I ground down and glassed a couple cracks on the deck beforehand that way everything thing should be solid and the cloth should prevent anything from coming through again.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
131
Projects / Re: 82 Eliminator Sprint
« on: February 28, 2015, 12:27:11 PM »
Got the boat back after getting the bulkhead, forward stringers, and the bilge damn replaced. Everything turned out pretty nice. Now it's time to finally get the new intake set and start working on the keel.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
133
Projects / Re: 82 Eliminator Sprint
« on: January 27, 2015, 04:54:42 PM »
Took her to a fiberglass shop a couple weeks ago to have a new bulkhead/toe board put in, have him finish glassing the knee braces/ gunnel supports and glass in a new bilge dam. Ended up need new wood supports underneath the deck too. Should have it back in a week or two. Might figure out something with paint or just get it all prepped and in white primer for summer. Hopefully ill be able to get a rail kit in her soon and ive heard a lot of you guys say good things about bostick so i think ill be taking the motor to him sometime soon as well. If anyone would like to give me his number please send me a pm unless you dont mind posting it. Ill post some pics of the work when I get it back. I stopped by the shop today and saw he had already had the toe board cut out for it and it looked pretty good so im stoked.
134
Engine Mechanical / Electrical / Re: Fuel Problem???
« on: December 05, 2014, 02:52:56 PM »What kind of ignition coil? Sounds like a coil is dropping.
Might try a spare coil.
Water was my first thought, or a collapsing fuel line on the intake side of the fuel pump.
GT
He's running an msd blaster ss coil.
He's also checking the fuel lines today.
135
Engine Mechanical / Electrical / Re: Fuel Problem???
« on: December 05, 2014, 06:18:58 AM »
He's running a mechanical fuel pump, not an electric. And we are going to mess with it today so we will see. Gonna probably drain the gas and start fresh there and I'll tell him about the coil.
136
Engine Mechanical / Electrical / Re: Fuel Problem???
« on: December 03, 2014, 09:31:40 PM »Electric or mechanical fuel pump?
Sent from my iPhone using SoCal Jet Boats
I think it's electric.
137
Engine Mechanical / Electrical / Re: Fuel Problem???
« on: December 03, 2014, 09:29:03 PM »Sounds like water in the gas to me.
I'll tell him to drain the tanks and the lines. He has a separator and he said he changed the filter too but I don't think he did anything else. Thanks jake
138
Engine Mechanical / Electrical / Fuel Problem???
« on: December 03, 2014, 07:57:24 PM »
My buddy has a 21ft eliminator daytona with a blown 482 bbc that has dual holley 750s. He ran it labor day weekend and it ran perfect. The next time he took it out it ran fine at idle and on the trailer, but as soon as it got on plane it craps out and dies. It will fire right back up and as soon as you get on plane, same thing again. He replaced a bunch of ignition stuff, plugs wires, msd box, cap and rotor, and the battery thinking it was that, but it still does it. Hes not computer savvy and I told him I would see if any of the experts wanted to chime in or if anyone has had this problem before. Thanks Fellas.
139
Boats For Sale / Re: Southwind Dragster for Sale.
« on: November 12, 2014, 05:20:50 AM »http://www.socaljetboats.com/index.php?topic=22149.0
Sent from my SAMSUNG-SGH-I747 using SoCal Jet Boats mobile app
^ Word...
140
Projects / Re: 82 Eliminator Sprint
« on: July 27, 2014, 07:41:24 AM »
Here's the after pics. I plan on re installing the gunnel supports next weekend.
141
Projects / Re: 82 Eliminator Sprint
« on: July 26, 2014, 02:44:15 PM »
Pulled her out of hibernation. Time to get back on track.
142
Projects / Re: SCJB Exclusive: 2014 19' Cheyenne
« on: July 07, 2014, 06:19:33 PM »Here's a lil preview of the small block hhahahah
Sent from my SM-G900T using SoCal Jet Boats mobile app
Sam, we might have to check you into the looney bin because this thing is friggin nuts!!!
143
Random Boat Parts For Sale / Re: Cocktail style seats
« on: May 19, 2014, 05:13:06 PM »
Seats are sold! Thanks Jake.
144
Random Boat Parts For Sale / Re: Cocktail style seats
« on: May 13, 2014, 09:21:51 PM »
They are located in apple valley.
and Sale pending
and Sale pending
145
Projects / Re: 82 Eliminator Sprint
« on: May 13, 2014, 03:19:35 AM »So how's this project coming looking forward to having are own sprint regatta soon
Sent from my iPhone using SoCalJetBoats mobile app
I wish I had more to say lol but my wife and I just bought a house, we closed escrow on April 10, so I was pretty wrapped up with that for the last couple months. However I did make it down to B1 last week to pick up my intake, a new full droop, and a bunch. Of diverter parts I had powder coated. I also just picked up those fiberglass buckets and bench. Should be getting on back on track after memorial. Will post some pics soon.
147
Random Boat Parts For Sale / Cocktail style seats
« on: May 12, 2014, 09:10:04 PM »
Cocktail style seats in pretty good condition. A little wear on some of the piping as seen in the pictures. Minor stuff here and there but you can definitely get a few more seasons out of this setup.
250 obo
250 obo
148
Random Boat Parts For Sale / Re: Killer seats on C/list!!!
« on: May 09, 2014, 08:39:14 PM »
Thanks Brian, it was good meeting you and your bro in law.
149
Boats For Sale / Re: 1981 Eliminator Daytona 19'
« on: May 07, 2014, 07:42:15 PM »Boat is sold :-(Damn... That was fast! Bummed i never got to see it with you at the helm bro.
Sent from my SAMSUNG-SGH-I747 using SoCal Jet Boats mobile app
150
Boats For Sale / Re: 1981 Eliminator Daytona 19'
« on: May 07, 2014, 06:36:47 PM »Nice move Dave'y cakes a house right now is a smart thing since you can get away with 3 percent down 👍. A boat can always be replaced and with all the deals out there you will be surprised how fast you will own one again bud. Good seeing ya at irvineI agree, good move dave. I just bought a house and closed escrow on april 10th. Had to put the project on hold for a little bit due to a lack of time haha. Good luck on the sale bro!and I will have a seat for ya in my polished turd and will spread the word for ya
Sent from my iPhone using SoCalJetBoats mobile app