1276
WTB / Re: WTB SBC Distributor
« on: March 11, 2013, 01:54:27 PM »
Couldn't answer that question honestly but I would assume that they are the same, hei's just have the coil in the cap
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1277
WTB / Re: WTB SBC Distributor
« on: March 11, 2013, 01:46:22 PM »
Well I have 2 dizzys that are not in use and both are not marine distributors. One is a Mallory that's free but that needs new electronics about 130 to repair and a good gm hei that id let go for 50. But j&m speed center in riverside has msd hei's for about 150 right now.
Btw bbc and sbc use the same dizzys
Btw bbc and sbc use the same dizzys
1278
WarZone / Re: 78 Hawaiian new project
« on: March 11, 2013, 12:39:34 PM »
Wanna come spray mine
1279
Engine Mechanical / Electrical / Re: Fuel vents ???
« on: March 11, 2013, 08:17:34 AM »
i have a vent about a foot away from each flip top but they are not hooked up. I've noticed most flip tops are vented but im probably wrong
1280
Project Boats For Sale / Re: 77 challenger hull with jet
« on: March 11, 2013, 08:09:42 AM »
I think he was asking in the area of 250
1281
Boat Showcase / Re: '73 Southwind
« on: March 09, 2013, 05:41:00 PM »
What do mean play? Did you unbolt the Driveline?
1284
The No Wake Zone / Re: Why I hate Photobucket....
« on: March 08, 2013, 09:47:58 PM »
And that's why I love the app. Take picture on phone, hit the button and submit 15 seconds later. Makes it so much easier then transferring to comp and then submitting
1285
WTB / Wtb olds old filter adapter
« on: March 08, 2013, 08:19:19 AM »
Looking for the oil filter adapter for a 455 that sticks the oil filter out the back net to the bell housing
1286
SoCal Lakes / Re: Elsinore
« on: March 08, 2013, 07:42:20 AM »
I have never had good luck there. Been there a few times and always ended up leaving early. Either idiots on the water or mr law man had a prop stuck up his ass
1287
Engines / Engine Parts For Sale / Re: wanted: junked BBC
« on: March 07, 2013, 05:40:24 PM »
Good luck a stripped block is worth near 100 in scrap. He's selling his for a 150 and its a good block
1288
Gelcoat / Paint / Fireberglass Repair / Re: Hyrdo paint job
« on: March 07, 2013, 01:54:00 PM »
Hey Sam do you have any tips or tricks to offer as far as technique and gun set up for a gf hvlf. Gonna shoot the bottom of my hull with a axis single stage heavy metallic silver on Monday. Thanks
1289
Engine Mechanical / Electrical / Re: Electric Fuel Pump
« on: March 07, 2013, 11:51:03 AM »
Are you not able to put a mechanical fuel pump on? I never cared for electric pumps but always carry one just incase.
1290
SoCal Lakes / Re: Elsinore
« on: March 07, 2013, 08:07:48 AM »
I have to agree with bj, i grew up at elsinore. Parents friends had a house right on the lake and would launch in their back yard. Its alot cleaner than it was 10 years ago and its a pretty nice lake till about noon if you have a low pro boat. Many a times as a kid I member waking up in the morning and finding a swamped boats bow bobbing 20 so feet from their shore line. Still a pretty cool place.
1291
Engine Mechanical / Electrical / Re: which engine?
« on: March 06, 2013, 11:42:32 PM »
I have a complete bbc 402 from pan to intake and harmonic balancer to flyweel and glenwood 4 point mounts along with it. Pretty sure it needs to be rebuilt, motor was seized when I got it but I got it to run somehow. Low compression in 2 cylinders.
1292
I/O's / Re: Fuel system question
« on: March 06, 2013, 10:16:08 PM »
Take your belt off and see if it goes away
1293
SoCal Lakes / Re: Elsinore
« on: March 06, 2013, 04:50:34 PM »
Oh and the green glowing skin fades after a week or so...........
1294
Gelcoat / Paint / Fireberglass Repair / Re: rub rail
« on: March 06, 2013, 03:52:54 PM »
Just cap it jordan I know a guy that's decent at glass work and might be a good painter. Haven't found out yet.
1295
SoCal Lakes / Re: Elsinore
« on: March 06, 2013, 01:32:18 PM »Close your mouth before you hit the water.
Sent from my ADR6400L using Tapatalk 2
X2
That water will give you the shits like you wouldn't believe
1296
Engine Mechanical / Electrical / Re: which engine?
« on: March 06, 2013, 01:28:05 PM »
Do you have the mounts or are you going rail kit?
1297
Engine Mechanical / Electrical / Re: Water pressure
« on: March 06, 2013, 11:23:54 AM »
White Rouge and a buffing wheel should take that bluing off. Tested it on a set I had and it took some pressure but the bluing and yellowing came right off
1298
Projects / Re: 71 kona project
« on: March 05, 2013, 08:13:39 PM »
Unfortunately I think I'm am. Got a lot more sanding to do now, and more work ahead than originally planned. Didn't want two spray more than I had to but this way I'm covering the beaching spot and the repair and the lines follow the outer Chines so hopefully it will look alright.
1300
Projects / Re: 71 kona project
« on: March 05, 2013, 05:37:55 PM »
Such a stupid decision and can't make up my mind