Is marine grade plywood the best thing to use on floor replacement or is there something better?

Yup, thats the best way to go bud! make sure you resin it on both sides too keep the water out.

I've driven a few. I don't like it because it's too much to do with the down peddle and lock out.
Plus no backwards gear. Idk, it's cool if your into that sort of thing 😲🚤💨💨💨👍👍👍👎👎👎


Sent from my iPhone using SoCalJetBoats mobile app

Iam here now!!! Leaving tomorrow for Havasu!!!! park is empty and water is still up!!!


Sent from my iPhone using SoCalJetBoats mobile app

My spoiled dad.... 

Hahah and me.
I'll be racing in s/e. Look for the all orange safety cone going down the track. S/E 177


Sent from my iPhone using SoCalJetBoats mobile app

I agree with jake to much flex and movement on a boat plus I'd get ahold of jack at mpd if you plan on putting some decent hp to this there great boats but have issues on shit down if you don't drive em thru the back door. He can sell you or instal a set of pods that will help the boat out jmo


Sent from my iPhone using SoCalJetBoats mobile app

Yeah I have agree here. It's just my opinion but, you couldn't pay me to drive a cp or Texas tunnel. Some of the most dangerous boats ever built. Every person I know that has owned one has been tossed out of them. With that being said.
Get with jack at MPD and get the pods on there and a jet-a-way/ pop off if you plan on putting a good amount of hp.

The "shit"down that Justin mentioned hahaha


Sent from my iPhone using SoCalJetBoats mobile app

Nice work man! i am going to be doing this to my race boat trailer after the havasu race. your attention to detail is great! nice work!!!!

Bump.

The Orangegasm will be leaving wednesday morning for McIntyre. we will do a little test n tune wednesday night. Should be in Havasu around 1PM Thursday. Come by and say hi! 

Ok here is the deal. I have been trying to get my boat to idle and this thing is kicking my a$$... I have an olds 455 with edelbrock aluminum heads and a dual quad offy tunnel ram. Running two edelbrock 600 carbs. Am I under carburated? This engine is running about 9.5-1 compression.


Sent from my iPhone using SoCalJetBoats mobile app

How does it run? anything wrong? if not leave it alone. 1200cfm for a 455 is fine i would think.

I just bought 40 weight Mobil 1 any body was going for 30 weight but they had none and a napa gold filter anybody see a problem with using 40 weight   What are all you. Using


Sent from my iPad using SoCalJetBoats

I use lucas oil 20-50 or redline 20-50 because of the zinc contents. most conventional oils dont have much in there.  I use baldwin filter or wix racing filters. either way you should be just fine going from 30 to 40. ive always ran 20-50 in every boat motor ive ever owned.

nice work nick! those look killer! 

I have a 14' 10' little fishing boat with a 6hp outboard {whacker} What are the rules in Cali for what you do or don't have to register? The guy I got it from didn't have a pink for the boat but did for the trailer. It has CF numbers on one side, not to great looking tho. I'm thinking, because it had 2 numbers on the inside that it mustve been a rental boat at one time. Anyone

does it have a vin number on the back ?

I'm leaving here sat morn at 6:00am should put me at Jakes at about 7:30/8:00. Jake said we're cruising up river past the 10fwy. So I'm counting on learning that part of the river you guys because I'll be flying blind.


Sent from my iPhone using SoCal Jet Boats

were not going too far past the 10. maybe a mile.  just going to hang with the boys from those guys racing for a bit and head back twords goose and the island. should be a blast! we can always throw the Ultra in tad 

Hey jake
Will be out saturday morning by 10ish and staying till monday
Looking forward to hanging on the river👍👍


SRC 🚤💨

Awesome bud! cant wait for this weekend man! see everybody out there!