1426
WarZone / Re: The best online parts store around!!!
« on: April 09, 2009, 06:03:55 PM »
C'mon Omar...You know a better place 4 part's/service 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1427
Cars / Automobiles For Sale / Re: MINI CHOPPER !
« on: April 08, 2009, 09:14:37 AM »
Cool bike Omar 
1428
Projects / Re: 73' Tahiti Crusader
« on: April 02, 2009, 12:36:17 PM »
I love Tahiti's....Could be a great boat...Good luck with it 
1429
Miscellaneous / Spam / FOR SALE; "CYLINDER BLOCK HONING MACHINE"
« on: March 31, 2009, 05:12:56 PM »
HONING MACHINE COMPLETE WITH TOOLING AND HONING STONES...WILL DO 4/6/8 CYL STUFF..
MANUAL STROKE,COOLANT PUMP,HONING TANK,COMPLETE ASSY,WORKS GREAT.
THIS IS A SPARE MACHINE OF MINE.
FIRST $ 1,875.00 takes .............contact dave at www.aanddengines.com
Will deliver 10 mile radius
MANUAL STROKE,COOLANT PUMP,HONING TANK,COMPLETE ASSY,WORKS GREAT.
THIS IS A SPARE MACHINE OF MINE.
FIRST $ 1,875.00 takes .............contact dave at www.aanddengines.com
Will deliver 10 mile radius
1430
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 21, 2009, 12:30:29 PM »
Spare dimes?
? is it cause metal+ metal = JUNK...and the dimes wear out
? is it cause metal+ metal = JUNK...and the dimes wear out
1431
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 21, 2009, 12:28:29 PM »
Ok.....spair dimes, snicker's, and BEER......that it
1432
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 21, 2009, 09:44:06 AM »
Very well done Omar......I'm headed to the store to stock up on clay,pam,tootsie rolls and
M&M"S as we speak.....Did I forget anything on the list
M&M"S as we speak
.....Did I forget anything on the list
1433
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 20, 2009, 08:38:05 AM »
What's up Omar?? Don't you like M&M's :
1434
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 19, 2009, 05:32:09 PM »
Yo.... I am now educated.
I'm tossing my mic's in the trash and gonna use chocolate M&M's for V/P.
I loved the tootsie roll thing...too cool!
I'm tossing my mic's in the trash and gonna use chocolate M&M's for V/P.
I loved the tootsie roll thing...too cool!
1435
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 18, 2009, 05:39:39 PM »
PW TONY ....I agree.... How can you measure clay
If you want to do it properly......Invest in machinest tools.
They are way more expensive than .020 cents!
If you want to do it properly......Invest in machinest tools.
They are way more expensive than .020 cents!
1436
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 18, 2009, 05:02:42 PM »
I forgot.... On my site under SERVICES you can view a pic. of V/P Checking.
www.aanddengines.com
Hope you all have a great day
www.aanddengines.com
Hope you all have a great day
1437
Engine Mechanical / Electrical / Re: CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 18, 2009, 04:56:09 PM »
Does clay give you an exact clearance.?...... Keep an open mind if you will.... This
came from ENGINE BUILDER MAGAZINE, NOT ME!
And what is nuts about it?
But I do appreciate your comments...........Good Day Sir
Let me know what You find out
came from ENGINE BUILDER MAGAZINE, NOT ME!
And what is nuts about it?
But I do appreciate your comments...........Good Day Sir
Let me know what You find out
1438
Engine Mechanical / Electrical / CHECK YOUR VALVE TO PISTON CLEARANCES FOR .020 cents!
« on: March 18, 2009, 04:42:33 PM »
Not my method but...... Here is how you MAY do it.
For adjustable valve train only!
1. To check your valve to piston clearances, simply adjust your rocker adjustment as you normally would,
BUT, in between your rocker arm and valve stem, install two dimes, crank engine over a few times
and feel for contact. (2 dimes give you about .125 clearance/I never measured them)
Once again, this is not my method.....but it makes sense. ATTEMPT AT YOUR OWN RISK!
For adjustable valve train only!
1. To check your valve to piston clearances, simply adjust your rocker adjustment as you normally would,
BUT, in between your rocker arm and valve stem, install two dimes, crank engine over a few times
and feel for contact. (2 dimes give you about .125 clearance/I never measured them)
Once again, this is not my method.....but it makes sense. ATTEMPT AT YOUR OWN RISK!
1439
Boat Racing / Re: Puddingstone Race March 28-29
« on: March 17, 2009, 12:48:56 PM »
I should be able to be their the 29th.
1442
Engine Mechanical / Electrical / Re: VINTAGE 283 with Power Pack Heads.."Built by and Installed by 70 yr old man
« on: March 04, 2009, 11:16:10 AM »
I"m proud of him too.....He put his heart into it and the results show it.
ANOTHER THING>> that 283 would be mighty fine in an old boat
Happy cruis'in Igor
ANOTHER THING>> that 283 would be mighty fine in an old boat
Happy cruis'in Igor
1443
Engine Mechanical / Electrical / VINTAGE 283 with Power Pack Heads.."Built by and Installed by 70 yr old man
« on: February 27, 2009, 07:43:15 PM »
My friend Igor....assembled /installed his engine alone . Pic's to follow
1444
Engine Mechanical / Electrical / Re: Houston I have a problem...
« on: February 27, 2009, 11:44:38 AM »
X 2 ....Tom will fix the prob
....Tom will fix the prob
1445
Engine Mechanical / Electrical / Re: 460 BOAT MOTOR
« on: February 26, 2009, 07:12:52 PM »
Thank's Brad/Ralph/Omar.. X 2...
1446
The No Wake Zone / Re: i hate packing/moving
« on: February 22, 2009, 12:36:41 PM »
Congrats Ralph! Investment of a life time 
1447
The No Wake Zone / Re: new game
« on: February 20, 2009, 02:27:10 PM »
scored 1222...I know how much some of you hate this game
1448
The No Wake Zone / Re: new game
« on: February 12, 2009, 07:42:19 PM »
My 9yr. old son... Scored 1,599.! David Jr.
1450
WarZone / Re: Vette Girls
« on: February 10, 2009, 11:09:31 AM »
Nick...Cross streets Imperial/Cypress (1140 S. Cypress st La Habra,Ca. 90631)