The pump adapter is for what pump


Sent from my iPhone using SoCal Jet Boats

Not sure maybe someone on here will know!

Put your brakes on! Lol
Yes thanks for pointing it out...i missed a zero....problem fixed

Thanks and sorry guys!

This engine was Custom built here at Hardcore Racing Engines with premium parts. It was dynod at Westech Performance 9/21/18. It was dynod on TRUE 91 octane gas and is static 10:1cr

Dart block tall deck....Lunati Rotating assembly.....Musi victor CNC heads.....Comp custom Hardcore solid roller cam.... Jesel DLC coated lifters....Manton pushrods....Jesel Rocker shaft....Dart tunnel Ram 2x 1050 Dominators dyno results @961hp at 6900rpm 785lb/ft@4500
(Westechs remarks were" its the most HP ever made on there dyno with pump gas and conventional 24 degree heads period"...were not called Hardcore for nothing lol)
$18950

SBC & BBC Custom built Hardcore Alum heads

All heads are purchased bare and custom assembled by us here at Hardcore, the reason we  buy the bare is we can match springs accurately with your cam specs or cam we pick for you($100 off your cam if you buy heads and cam together!

On our Hardcore heads these are built with budget with quality parts in mind(Castings are made by RPC, these are NOT Pro Comp heads!), we use good quality PEP valves and springs with options to upgrade to Premium valves and Comp/Lunati springs.

SBC Hardcore 205cc with 2.02/1.600 Stainless steel valves PEP springs for Hyd flat tappet $795
Upgrades Premium Valves $100, Comp/Lunati springs $50, HYD roller springs .600 lift $100,  CNC ports 215cc $450
Dyno results on these heads un-ported on a mild 383 were 435HP 470lb ft, On a  383ci with mild hand port and with 6/71 and 2 Holley HP 750s was 632hp and 555lb/ft(see pics of dyno graph), both on 91 octane.

BBC Hardcore 335cc with 2.250/1,88 stainless steel valves PEP springs for Hyd flat tappet $1395
Upgrades Premium Valves $100, Comp/Lunati spring kit $80, Hyd roller springs.650 lift $120, Hand porting $450
Dyno results on engine #1 496 pump gas mild custom Hardcore Hyd roller cam 640HP 599lb/ft, Engine #2 496 with Comp  Extreme Marine custom Hardcore grind 658hp 606lb/ft both 91 octane.

Hi yes its still available PM sent

SOLD

I have 2 sets of Merlins one oval set and one  rectangle set, both have fresh valve job, resurfaced and assembled ready to go, 909 851 8251

Sorry just saw all those questions

Oval ports $1300
Rectangle  $1400

Both sets ported and assembled with NEW comp hyd roller springs

SOLD

73 schiada 4 stringer 1 piece hull. It has a 454 big block and a split bowl Berkeley interior is in great shape has stainless steal cavitation plates. Trailer has ALL brand new tires Boat runs great and is a true classic it is river ready.

Reduced to $7500 cash, this is bottom dollar so no offers no trades just $7500 cash 

CL link below for bigger better pics

https://inlandempire.craigslist.org/boa/d/ft-schiada-jet-boat-turn-key/6634500113.html

Looking for some big block Chevy 454 cylinder heads that are in good condition and are ready to bolt on.

Sent from my 5049W using SoCal Jet Boats mobile app

I have 2 sets of Merlins one oval set and one  rectangle set, both have fresh valve job, resurfaced and assembled ready to go, 909 851 8251

BBC Gen 6 complete engine 525+HP

Block is Gen 6 bored +030 and square decked
Crank GM forged STD/STD
Rods GM forged resized with ARP bolts
Pistons Racetec forged 4032 flat top 9.5:1cr
Rings Total Seal Plasma moly
Oil pump Melling HV with steel drive
Oil pan GM 10qt
Timing chain HD true roller
Cam Comp Hyd Roller custom Hardcore grind 248/254.112HR ,647/,647 lift
Lifters Lunati Hi RPM Hyd roller
Push rods Trick Flow 3/8
Rockers  1.7 Lunati alum full roller
Damper Power bond
Heads Gen 6 Vortech large oval port 100cc heart shape chambers, heads have en cleaned and magged with a 3 angle valve job and surfaced, valves are stainless steel 1 piece and assembled with springs to suit cam with 10 deg retainers and locks
Intake is professional Products polished single plane
Carb Quick Fuel DP 750
Valve covers Marine polished side angle style
Distributor HEI
Wires are Taylor

All hardware is SS and all gaskets are Fel Pro Marine

Engine is not dyno'd but we can arrange and take it to get dyno'd if needed

$5995

Still available .....we will take old motors in trade!

Sent from my LG-H918 using SoCal Jet Boats mobile app

I'm selling a used magna star 300 fuel pump. 300.00

Sent from my Moto Z (2) using SoCal Jet Boats mobile app

Pm sent

Sent from my LG-H918 using SoCal Jet Boats mobile app

If you don't succeed try try again lol
Hopefully this one works
https://inlandempire.craigslist.org/boa/d/19ft-schiada-jet-boat-turn-key/6634500113.html

Sent from my LG-H918 using SoCal Jet Boats mobile app