Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - IRRebel

Pages: 1 ... 59 60 [61] 62 63 ... 223
1501
The No Wake Zone / Re: Home plumbing help
« on: November 22, 2010, 08:46:53 PM »
The water closet (the ring which retains the flange with the two bolts) should be hard bolted to the sub floor, I think (you didn't enclose any pictures  ;D ) the second (upper) funnel piece is a part of the old beeswax seal, it gets discarded and a new one installed. It sounds like someone at some point mucked up the original flange.

It is difficult to say exactly what you need, but it sounds like you need a new closet, I hope you don't have a slab.... :screwy:

On a side note...The American Standard Champion 4 is one badass MOFO of a shitter.... ;)


GT

X2 Jeff. Since you put tile in, get a thicker wax seal for the new toilet or a closet flange extender, some new bolts. and some toilet shims to keep the thing from rocking around on the new but probably not perfectly level floor.

As another side note on the toilet, I like the Kohler Cimarron myself. Nothing wrong with the Champion, great stool, I just think the Cimarron is a better buy. Have 2 one pieces (discontinued Rialto's) here to install when I ever get around to tiling my bathrooms, and it is compatible with any cheapo flush valve IF the mandated 1.6 GPF proves inadequate to down anything with one touch of the lever.  ;)

Ray

1502
Engine Mechanical / Electrical / Re: Intake Bolts
« on: November 21, 2010, 10:03:29 PM »
Talked to Boost a little while ago who also gave me the name of another local guy to get the hardware as opposed to ordering from Jegs/Summit. Thanks for all the info guys.  :thumbup:

I'm in agreement as well on the stainless. Your stock bolts will work fine, but stainless is soooo good looking and will remain so, you also don't need the expense of the overpriced ARP stuff.  ;)

Boost has ya hooked up!  :thumbup:  Fortunately for me, Casa Grande is still kinda mom/pop and I got a place around the corner called Fred's Nuts and Bolts where I get all my weird stuff. If he ain't got it, or can't get it on the cheap, I prolly don't need it...... If I remember right, Moo's latest Allen head intake bolts, studs, nuts and washers cost me a whopping $25 or so, including the stupid long middle studs for the weird Ski Tow I'm adding this time around. He had it all on hand!  ;)

Ray

1503
Engine Mechanical / Electrical / Re: Carb Rebuild Help
« on: November 20, 2010, 04:43:52 PM »
Let me know if you need more parts for the carb as well, Frank. I have 3 more of those things! Surprises me the kit was hard to find, it should just simply be a single feed version of a marine 750 cfm 4160........ :sly:

Ray

1504
What about running a more normal lift/duration with a very close lobe seperation (106*) to allow some loss of compression due to overlap.  Granted it will cause a narrow power band and very rough idle.

I like the sound of this idea!  :thumbup:

Ray

1505
Engine Mechanical / Electrical / Re: Custom Headers
« on: November 20, 2010, 10:33:24 AM »
Looking just plain sick bro!  :thumbup:

Yeah, I think Brad needs to change your SN to Mad Skillz..........

Ray

1506
The No Wake Zone / Re: Locking keys in the car!
« on: November 20, 2010, 10:28:39 AM »
Ray you got blondstar ;D

LOL! Funny stuff Marc!

Yeah, I got something Harry! She's seeing how funny it was now. I never knew she was German before this, or that she had that temper and it kindof explains a LOT!

Musta been that Hitler locked his keys in his car once and the poor Jewish locksmith that came didn't know what he was starting up......

Yeah, that comment got me into trouble too........ ;D

Ray

1507
The No Wake Zone / Locking keys in the car!
« on: November 19, 2010, 10:35:51 AM »
This is the funniest story on this I have ever witnessed! I'm posting it here instead of FB so she don't see it, and I don't get my ass kicked.....I think......

Yesterday, my GF Carol came down from Chandler to pick up Becca for a Girls night to go see the new Harry Potter movie. I'm about 10 minutes from the house when she calls and says she locked her keys in her car in front of my house! We've all done it, no biggie, so I let her know I'm prolly 5-10 minutes away.

I get there, and so as to not look helplss, she has my phone book out looking up locksmiths. She had called two of them, both in Florence which is at least a half hour away and would be a few hours before they could get there, the girls are freaking they're gonna miss the special pre-viewing of the movie, etc etc. I was like relax, call them back and cancel. I called on Juan, the guy a neighbor recommended a couple years ago when I did this myself......twice.......in my own driveway, lol.

Juan is licensed and bonded and has his own company here in Casa. I wish Ida taken pictures of all this. Juan says "oh, yeah, the boat guy, I'll be there in about 10 minutes" . Girls are thrilled! This is where it gets funny......I shoulda just sat back with a 12 pack and a camera........... seriously.

Juan pulls up in his, well, much more beaten up Chevy Pickup than I last remember seeing it.  And back THEN it looked like it had hit everything in Casa at least once. He rolls up, almost hitting MY truck, jumps outta his truck, smoke rolling with him, in a wife-beater and says Hey! to me from across his truck bed. Carol turns to me, and I see this woman with baseball sized eyes glaring at me and all she says, VERY sternly, is "Really!?!?" She is NOT impressed, lol.

Juan walks around the minivan and tells me "I hate these newer Toyota's" then gets his tools and starts prying open the window seals and installing teflon wedges in there. She kinda freaks, "Are you gonna scratch up my door and stuff?" he's like "no lady, it'll be fine"  He finally gets his hook onto the mechanism in the door and asks her, not me, to grab the door handle. He says to her, very clearly, I heard it, "now when I say go, pull the handle. The car will lock itself back up and set off the alarm in less than a second and we won't get a second chance at it". She says she understands. She grabs the handle, Juan yells "ir", she lets go, looks at him and says "what?". Car alarm goes off, Juan's a lil pissed, I'm already laughing, She's ready to strangle us both. This just started to piss off a sub 5' German girl, lol. He says "I said pull the handle the second I said go!" she says "you didn't say go! you said ear!" So while they're arguing, Im laughing like a hyena, the alarm is going nuts. A few neighbors were coming and going and Carol notices the people looking at us suspiciously. Juan tells her "Just smile and wave.........that way they don't call the cops." I get the first turn and glare.......Time for a beer thinks I........When I returned, they're still arguing over who screwed up, but smiling and waving as cars came by, alarm blarring. I'm still laughing, cant help it.

At this point, she turns and glares at me again like I had just rented her out for the evening........I can take a hint, so I did what any responsible BF would do......I downed the beer and I went back inside and got another beer and a lawn chair.......... They tried that once more, almost the same result, and yeah, the arguing got hotter and even more entertaining. Finally, Juan grabbed a few more wedges and simply pryed out the door at the window frame, and worked the lock button with a 4 guage ground wire. Car open, we're good. she hands him her credit card.........I went for another beer as this part I knew was gonna be good......"no credit cards, cash or check" She's really pissed by this point......Fortunately, I had my checkbook on me, kind of expected it, and made him out a check plus a tip for the entertainment value! He says to me as he's leaving, "Call me anytme, bro, but if SHE locks her keys in again, call a priest".......

I'm still dealing with the aftermath, and she is really pissed because I called everyone and told them the story , but sorry, was the funniest thing!

They did get to see the new Harry Potter movie after all!

Ray

1508
Lake Havasu / Re: new shop
« on: November 19, 2010, 08:17:41 AM »
   I thought you would have been bigger LOL 
         
               :o :o :o :o :o :o :o :o :o :o :o :o  whats going on guys.
       

Yeah I know huh? LMAO! I saw siggy line material right away........ :screwy:

Ray

1509
Lake Havasu / Re: new shop
« on: November 19, 2010, 07:59:54 AM »
Ray it was good meeting you last week but I have to say I thought you would have been bigger LOL ;D

 :o   That sounds a lil......well............

Good finally meeting you too Harry! Told the GF we're gonna hafta do a trip or ten to Havasu next year. She says "with all the topless girls....etc....etc....etc"

You can guess where THAT conversation went,  ;D

Ray

1510
Project Boats For Sale / Re: Feeler for Trash sale..
« on: November 18, 2010, 12:16:50 AM »
I could use a good steel crank.......Scare one up for me!  ;D

No real use for White Trash though.........wait a minute........OH you meant the BOAT!!!!!

Ray

1511
Jet Pumps / Re: WJ vs YJ
« on: November 18, 2010, 12:12:38 AM »
The YJ intake is much larger than the WJ, requiring major glass work to go back to the WJ at a later date.

The WJ is a superior pump compaired to the YJ.  The YJ is ok if you are running a barge with no plan on trying to go fast.  :thumbdown:



I have to agree. Back when I bought my Charger, the only one........at that time....... with a Jacuzzi pump.......and was a VERY involved Technical discussion over the phone, and a few beers, with Tom at JBP before I pulled the trigger and bought it. (We were BOTH drinking, Don't think that Tom had all the fun in this!  ;)  )

As I remember the conversation, the huge difference was the YJ was an "axial flow" pump. Whereas the WJ was more like the Berk in being, well, as I interpreted it at the time, "radial flow".

Tom will come along and correct me if I'm off base here, but the difference here is in pressure differential capability between the the inlet side and output of the pump nozzle.

FWIW, stay with your WJ! Much better pump....... :thumbup:

Ray

1512
WTB / Re: 429/460 4bbl manifold
« on: November 17, 2010, 11:57:00 PM »
Ive got a blue anodized Performer RPM, non air gap I'll sell for in or about that range. Ran on Moo for two lake trips, maybe 10 hours run time on it.

Forgive me. I"m usually good for pics, still owe some to some people, my LT blew up and I'm like a one legged bull trying to service all the cows here with my old desktop!  :'(

It's kinda the wireless print station in the spare bedroom normally, lol.

Once I get software on it and get busy I'll get 'em to ya. Prolly Friday. Nordie, Crewcheif and a few others have seen the intake though, it is prestine, and worked flawlessly.

Ray

1513
The No Wake Zone / Re: Chroming info?
« on: November 15, 2010, 04:19:55 PM »
My whole boat is polished aluminum and I'll tell you what it's a full time job just keeping that shit clean

HD and Nordie ain't lying! I half ass KINDA helped both of them before, Nordie spent a LOT of time showing me and my son HOW to do it right, but honestly.....HOURS AND HOURS AND HOURS can, and will, be spent on polished aluminum on these boats. Haven't seen how Boosts ended up first hand, but I'll take their word for it!   ;)

Ray

1514
Project Boats For Sale / Re: BITCHEN 1968 SANGER FLATTY LESS MOTOR $ 2200
« on: November 15, 2010, 02:55:02 PM »
Not much wiggle room on what kind of motor build has to go in THAT one......... ;D  :thumbup:

Ray

1515
Lake Havasu / Re: new shop
« on: November 12, 2010, 03:21:59 PM »
Congrats Harry!

Lets hope it's not that empty for long!  :thumbup:

Ray

1516
The No Wake Zone / Re: PU**Y
« on: November 12, 2010, 12:53:39 PM »
sent you a pic ray.check email

Here's dave's vette



Ray

1517
The parking IS the yard art

That it is! lol. That's another matter....... :screwy:

Ray

1518
So my Parents let me know they're flying out THIS Thanksgiving as well. Great! Love to see 'em, but apparently Thanksgiving is at MY house. Something I haven't done since before I met all you guys......

Anyway, in a panic today, I had to clear out this in my front room to make room for where we'll put the "kids" table. I can seat 16, but we're talking 30.



Sooooo, this was my solution. My house has pop-out shelves near the ceiling everywhere. Cin did a good job decorating them a long time ago, save for the Master Bedroom........so.......and I know you see it coming.......here was my solution.........



They're not on the counter at least!!!!  

Ray

1519
The No Wake Zone / Re: PU**Y
« on: November 11, 2010, 04:22:19 PM »
yeah, you'll love the thing! Dave sold his El Camino, but kept the Vette everyone wants, lol Me included!  :sly:

Ray

1520
Projects / Re: Crazy Eights Fall 2010 Slam Session
« on: November 10, 2010, 10:48:38 PM »
I'm REALLY curious to see how you set and align the intake, bro. Obviously, I gotta do two of 'em here pretty quick..... :sly:

Ray

1521
The No Wake Zone / Re: Mystery over the Pacific
« on: November 10, 2010, 10:33:31 PM »

Moon Beam's Innaguration party???

Ray

1522
The No Wake Zone / Re: PU**Y
« on: November 10, 2010, 10:29:59 PM »
"They call me a freak because I like to spit on these pussies before I eat them"

Beerjet quote?  ???

Ray

1523
Random Boat Parts For Sale / Re: wtb air vent
« on: November 10, 2010, 10:28:19 PM »
Lemme check my stash in the morning Ralph. I'm thinking my Ship came with it's originals and 2 sets of new ones like that........

It's DARK out there in the shed right now......lol

Ray

1524
The No Wake Zone / Re: ***BEERJET***
« on: November 10, 2010, 10:25:01 PM »
Happy Birthday bub!!!!!!

Have a........ah hell.......we all KNOW you'll make it memorable as only you can!  :thumbup:

Ray

1525
The No Wake Zone / Re: PU**Y
« on: November 10, 2010, 10:11:48 PM »
I wouldn't race against anything you own.......... :screwy:

Did you take the A&D stickers off before this?  ;)

Ray

Pages: 1 ... 59 60 [61] 62 63 ... 223

Null

SMFPacks CMS 1.0.3 © 2026