Got to run the boat over the weekend and went up to Parker to help the guys set up the track for this up coming weekend. Fun times for sure!


Sent from my iPhone using SoCalJetBoats mobile app

I recently bought a 21' Witchcraft that was set up for a Jacuzzi pump I think. The one that mounts to the transom. I have a Berk intake I wan to install as the pump and motor in my existing boat are good. I have done some research on the net to see how it is done and it looks fairly simple. If anyone has done this before and has some advise I would be very grateful. I'm sure there are some little things to watch out for. I have plenty of glassing experience but don't want to have to do it twice.
Thanks,

You will have to glass the whole intake hole in and cut a new hole. The jacuzzi intake hole is much bigger and the holes don't line up. If the intake is cut for a shoe, put the biting edge of the shoe about 1/8 above keel, you can set the intake from 4 degrees to 4.4 degrees. but no more than 4.4
Also make sure things are nice level from side to side. its an easy thing to do but just very tedious. Good luck bud.

Im sure some people dont wanna see what you caught on the cam Brad.


Sent from my iPhone using SoCalJetBoats

Haha I can't wait to see what he got. That was a great day.


Sent from my iPhone using SoCalJetBoats mobile app

I thinking about selling my 049's and going with a set of bare rectangle port Procomps and having my machinist assemble the valve train. Anyone have any reviews of procomps?


Sent from my iPhone using SoCal Jet Boats

Pro CRAP is right! You can pick up a pair of brodix BB2's bare for about 1300. Spend the money on quality parts.

April 18th threw 21st @ SoCal island.


SRC

Sent from my iPhone 5 using SoCalJetBoats mobile app

easter weekend. Ill be there! 

Here we go !! Good job Sammy ...


Sent from my iPhone using SoCal Jet Boats

Hahaha you guys crack me up.

These are the two guys i use.

keven @ CUS built my 1150 for a great price( way less that 700) and ran great right out of the box.
http://www.csucarbs.com/index.html

Most people i know use john @C&J engineering
http://www.candjengineering.com/

Sea chickens FTW!!!!!!


Sent from my iPhone using SoCalJetBoats mobile app

I feel your pain bud!

Ya I no the dividers are to stop the circler motion of the water that cms out I think that having nothin in the way would be better!!! Where's Chris's at with the b1 answeres or Andy


Sent from my iPad using SoCalJetBoats mobile app

Yeah I agree about the cfm's. None of the droops I've ever ever run have had the dividers in them. Personally, it would be a good data test with the edlelbrock quick data 2. Also adding wedges and nozzle inserts would make it even more intresting.


Sent from my iPhone using SoCalJetBoats mobile app

Alright so I'm actually building this motor for my 76 c10 swb drag/street truck. I'm curious as to what kind of hp and torque I can expect and what routes I should take and what compression i should expect and what kimd of fuel i can be expecting to run. ill list what I have below

010 .030 over 4 bolt block
400 3.75 stroke crank already machined
6 inch rods with KB flat top pistons
Vic jr intake
64cc Vortec heads off a circle track crate engine
Gm racing cam .435Int/.460Exh lift and 212/220 Duration with 112 lob separation
Comp cams 1.6 roller tip rockers (so lift will actually be .464/.490 if I did the math right)
Double roller timing set.
800cfm q-jet. 

sorry this is non boat related. So cal is pretty much the only forum I get on.


Sent from my iPhone using SoCalJetBoats

My dad had a 383 he built for his ultra. 10.5 to 1, bout the same cam with a set of world 202 heads on it. it made a tad under 400 HP.
Hope this helps.

My pump has had both the mini droop and the regular droop.


Sent from my iPhone using SoCalJetBoats mobile app

Official Dates are 26-28th of September.

The Regatta will be on saturday the 27th. I am working on a BBQ deal and maybe a band to play saturday night at McIntyre.
Location will be different from last year but still in between KOA Riviera and McIntyre. Still working on it.
Awards will be given out for best southwind 18, 18 t deck, 19tunnel, 20 cruiser and longest haul.

New awards will be given for best 20 ft or smaller V-Bottom, Daytona style  v-drive( if any), Best 21 or bigger, Best of show is open to all boats this year.

With 10 awards this year, if anybody is willing to donate shirts, stickers, product, ect... for the regatta please let me know.

Shirts will be sold on saturday at the event like last year.

Maybe a horseshoe tournament given the amount of space. we will have.

Big Thank You to our sponsors stepping up already!

Brad @ SocalJetBoats
Chris @B1Racing
Cy @ CycoDesigns
The McIntyre Family
Also Southwind011 for helping me out this year!
Logo Art Joanna lopez

Lets make this the best Regatta yet! See you All In september