Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jyeager

Pages: 1 ... 66 67 [68] 69 70 ... 81
1676
Random Boat Parts For Sale / Stainless impeller
« on: December 12, 2013, 09:47:42 PM »
Still for sale stainless steel impeller. B- WareRing surface is  7.230 Had chris from B1 check it out. Older impeller but still a great piece.
would like 600 or best offer. Its located in West Covina CA
jake -626 991 3377




1677
The No Wake Zone / Re: SoCal live thread
« on: December 12, 2013, 08:08:56 PM »
i just got the last 2/3 fittings for mine to jake I got black tho, I still gotta get 10' of hose. Then I can get to work lol. Post up pics when ur done jake I wanna see.


Sent from my iPhone 5 using SoCalJetBoats mobile app
   Dang Jake, you building hoses for all those :o

Yup, I hate the look of regular fuel and water hose! So stainless hose for the whole boat. I posted some finished stuff in my thread. Man that stuff is expensive.

1678
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: December 12, 2013, 08:01:39 PM »
Picked up about half of the fittings from one of my sponsors for the 177 boat this afternoon. Man that really helps lol Just one of the Hose ends was 15.00$ Da Hell!!!????


I am pluming all the fuel with -8 AN's and stainless steel line.
The water will be -8AN's in to an gate valve and a pressure relief valve. -10 AN out.

Anybody who had done this knows that it sucks. But..... I picked up a tool that makes putting the fittings on the hose super easy!!!!! :screwy: :sly: >:D ;D

Its called the KOUL TOOL. You put the part of the AN that goes over the hose in the KoUl tool
BUY THIS TOOL! It makes assembling AN's easy!!!!!





Close it and put it in a vise and push the line in. Boom Done!
















I need to pick up another 1/4NPT to -8 90* for the in side of the fuel pump. It wont fit wit a straight AN. It hits the Oil filter. Also need to pick up a inline fuel filter at some point.





1679
The No Wake Zone / Re: SoCal live thread
« on: December 12, 2013, 02:10:25 PM »
What should of been well over 200 bucks ;) let the fuck up fingers begin!


Sent from my iPhone using SoCalJetBoats mobile app

1680
The No Wake Zone / Re: SoCal live thread
« on: December 11, 2013, 09:41:15 PM »
Chocolate, eggy, beer farts
Im outa here


SRC


1681
The No Wake Zone / Re: Newbie Need help Deciding on Trading for 1st Boat
« on: December 11, 2013, 08:43:22 PM »
I may be way off here and I didn't look it up but I would say around 8-9k range what's the jeep worth but then again I agree with jet boat Maloney too!! Hope this helps a lil bit good luck welcome to the site and it's a great lookin boat too advantage is a well made boat


Sent from my iPhone using SoCalJetBoats

X2 8-9 on a good day. Advantage is a great boat. Depends on the value of your jeep.
good luck on the deal!

1682
Events / Re: first 2014 get together
« on: December 11, 2013, 08:38:24 PM »
Is there a race that weekend Jake?


Sent from my iPhone using SoCalJetBoats
The parker race is the 21 22 23 of feb

1683
Events / Re: first 2014 get together
« on: December 11, 2013, 08:15:27 PM »
no track for me bud, i dont wanna look cool and run a 15sec, pass


Sent from my iPhone using SoCalJetBoats
well its 1000'ft so maybe 12????
Come drink beer in the 177 pits?? :thumbup: :thumbup: :thumbup: :beer: :beer: :beer:

1684
The No Wake Zone / Re: SoCal live thread
« on: December 11, 2013, 07:12:06 PM »
This could turn out really good or really bad!!!!


Sent from my iPhone using SoCalJetBoats mobile app

1685
Events / Re: first 2014 get together
« on: December 11, 2013, 07:10:10 PM »
Ummmm Parker race ;) go lupo!


Sent from my iPhone using SoCalJetBoats mobile app

1686
The No Wake Zone / Re: SoCal live thread
« on: December 10, 2013, 07:45:03 PM »
All about the chili cheese frys with pastrami! Worth every bit of 9 bucks !!!


Sent from my iPhone using SoCalJetBoats mobile app

1687
Projects / Re: 21 Bahner I/O project...
« on: December 09, 2013, 07:36:29 PM »
stripping them down to bare aluminum... they had some remnants of the original powdercoat and then some rustoleum paint that i dont think ever dried.  the box they were shipped in REEEEKED of paint fumes...  so took some aircraft stripper and a quick wire wheel and it comes right off.  be careful with this stuff if you get it on your skin it will BURN like hell.




That aircraft stripper works great!
Those trim tabs are huge! that should help that thing get going. Keep up the great work bud!

1688
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: December 09, 2013, 07:34:05 PM »
Hung some wire today. Used some countersunk stringer washers allen head bolts, drilled the gunnel with 4 1/4 holes and 1/2 wire loom holders.




1689
Random Boat Parts For Sale / WTD Steering set up for an 18 ft jet.
« on: December 09, 2013, 04:16:41 PM »
Keeping the clago set up that came with my dimarco for my race boat. Looking for a rack set up cable post ect. let me know what ya got.

-jake

1690
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: December 08, 2013, 09:50:27 PM »
pushed that motor a little forward huh  :thumbup:

Thats about where they had rigged it before. Its actually 4 inches closer to the transom that before. :screwy: :banghead:

1691
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: December 08, 2013, 05:53:41 PM »
Lookin good brotha! Are the motor mounts Madskillz specials?
Thanks man. The motor mounts are from jet boat performance, i was too lazy to make my own. haha. I should have though.

1692
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: December 08, 2013, 05:20:39 PM »
well got most of the wiring done today. All that left is to hook up the battery and starter, run the wire up to the dash and hook up the gauges and start button and ect.
Also got the start button, bildge pump switch, and the gauges in as well.  Excuse the grease and dirt on the dash.  :screwy:














1693
The No Wake Zone / Re: SoCal live thread
« on: December 08, 2013, 11:16:41 AM »
Once the jets finish kicking the raiders ass, maybe I'll go finish wiring up the DiMarco. Lol


Sent from my iPhone using SoCalJetBoats mobile app

1694
The No Wake Zone / Re: SoCal live thread
« on: December 07, 2013, 11:24:13 PM »

i used to live down the street from there and I graduated from there too my parents still live there small world how did they do? Hope your daughters team won


Sent from my iPhone using SoCalJetBoats
Claremont is my old stomping grounds. My parents owned Casa Flores in the village for 15 years. It's some high end food joint now.


Sent from my iPhone using SoCalJetBoats mobile app

1695
The No Wake Zone / Re: SoCal live thread
« on: December 07, 2013, 11:21:52 PM »

Just missed you Jake.  My daughter was playing in a water polo tournament today at Claremont High School.
That's awesome! I've subbed there a few times. Great school. How'd she do?


Sent from my iPhone using SoCalJetBoats mobile app

1696

Great job on the boat and keeping us updated with the details and pics.  Thanks. :thumbup:
After the wiring, what do you have left to do?
Thanks man. After wiring I have pluming and steering and cables. That's should wrap it up.


Sent from my iPhone using SoCalJetBoats mobile app

1697
The No Wake Zone / Re: SoCal live thread
« on: December 07, 2013, 06:31:21 PM »
Comedy club in claremont tonight with the gf, sister and her bf.


Sent from my iPhone using SoCalJetBoats mobile app

1698
The No Wake Zone / Re: SoCal live thread
« on: December 07, 2013, 04:33:05 PM »
We started off in San Pedro for a month, then a month in San Ignacio, a weekend in Placencia, then a month in Punta Gorda, were heading back to San Pedro to finish up some work with the Coast Guard.

I want to try and do a video like that for each stop for racing next season.

1699
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: December 07, 2013, 04:31:16 PM »
Got the electric bracket done. Made it with 1/4 inch angle aluminum. Broke one of the terminals so ill replace that tomorrow.









1700

Good stuff 👍

Sent from my SCH-I545 using SoCalJetBoats mobile app
Thanks brad!


Sent from my iPhone using SoCalJetBoats mobile app

Pages: 1 ... 66 67 [68] 69 70 ... 81

Null

SMFPacks CMS 1.0.3 © 2026