Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jet Boat Maloney

Pages: 1 ... 6 7 [8] 9 10 ... 35
176
Hulls / Re: 77 Eliminator safe top speed
« on: November 07, 2014, 09:02:36 PM »

Quote from: Just Electric on November 07, 2014, 04:44:03 PM
i would leave the boat alone and get more seat time before you go adding more ponies 😜


Sent from my iPhone using SoCal Jet Boats
X2 on waiting on the ponies and buying the safety stuff. Says the bone head that's putting a12:1/2 to one beast together but like everyone says I'll be getting the jet a way and pop off valve next.  Good luck with you're boat & have more fun than you can stand!!!


Sent from my iPhone using SoCal Jet Boats

177
Projects / Re: Machine work
« on: November 07, 2014, 08:49:53 PM »

Quote from: jyeager on November 07, 2014, 02:30:34 PM
its a bit of a drive but Rod Phillips @ Auto Dynamic Balancing in Irwindale is great. He has done a lot for us over the years.
Is he doing the new motor?


Sent from my iPhone using SoCal Jet Boats

178
Boat Racing / Re: Lucas Oil NAPA World Finals
« on: November 02, 2014, 07:54:04 PM »
Big thumbs up to Jake Yeager for winning his div. in the Lucas oil drags!!! Way to represent So Cal Jet Boats!!!!!
👍👍👍


Sent from my iPhone using SoCal Jet Boats

179
Projects / Re: 18' Bahner BBF tunnel ram dual Holley 750's
« on: November 01, 2014, 01:44:33 PM »

Quote from: Ralph Brunt on November 01, 2014, 01:21:00 PM
Pump shaft can fall into pan..ask me how I know...

Sent from my SPH-L720 using SoCal Jet Boats mobile app
X2 on that has a very distinct sound as it hits the pan!!!


Sent from my iPhone using SoCal Jet Boats

180
WarZone / Re: The big D.
« on: November 01, 2014, 10:24:18 AM »
That sucks Glen. But at least when it all said and done you'll be able to give advise on divorce too!! J/K good luck on your journey and know you have some really good people here to lean on.


Sent from my iPhone using SoCal Jet Boats

181
The No Wake Zone / Re: happy Halloween.
« on: November 01, 2014, 10:12:06 AM »

Quote from: MorePower on October 31, 2014, 02:52:06 PM
Got my costume ready to go! We got a free keg so I'm amped


Sent with my Fingers
Thought you said you had a costume?lol

How you doing Drew haven't talked in a while. Hope all is good!!!


Sent from my iPhone using SoCal Jet Boats

182
Engine Mechanical / Electrical / Re: Still collecting parts
« on: November 01, 2014, 10:05:37 AM »
It was suppose to have all top of the line parts in it. But when it let go at last Mother's Day meet and I finally got it all apart I found that the previous owner. How can I put this? Wasn't exactly truthful!!!! But now it's gonna have all the good shit and I can put that experience behind me!!! It's gonna be nice to know that it's done right and not have be thinking about it when I mash the go peddle.


Sent from my iPhone using SoCal Jet Boats

183
Engine Mechanical / Electrical / Re: Still collecting parts
« on: November 01, 2014, 09:46:43 AM »

Quote from: Flusher on November 01, 2014, 09:38:13 AM
CP's?

Sent from my SCH-I535 using SoCal Jet Boats mobile app
Oh yeah!!!!


Sent from my iPhone using SoCal Jet Boats

184
Engine Mechanical / Electrical / Re: Still collecting parts
« on: November 01, 2014, 09:46:05 AM »
Yeah she should have some pop !!!!
Almost there just a few minor parts then off to the machinist. Looks like 110/113 will be all she's drinking. Still might consider running E85 it's just a little hard to get in my area. That scoop you made was pretty cool had me up late last night thinking of making one. I like you want something a little different than what's out there.


Sent from my iPhone using SoCal Jet Boats

185
Engine Mechanical / Electrical / Still collecting parts
« on: October 31, 2014, 11:28:08 PM »
Newest edition to the family!!!


Sent from my iPhone using SoCal Jet Boats

186
Boat Racing / Re: Lucas Oil NAPA World Finals
« on: October 31, 2014, 11:13:17 PM »
You're doing a great job Jake. 👍👍👍


Sent from my iPhone using SoCal Jet Boats

187
The No Wake Zone / Re: scoop question
« on: October 31, 2014, 11:11:04 PM »

Quote from: icecreaman on October 31, 2014, 08:41:02 AM
I made mine because I wanted something a little different from what every one else was running.  Plus I had this idea of an old school nitro scoop, or at  least that's what I call them.  I had no experience doing this kind of stuff (plug making) so I  just winged it with some high density foam.  I'm happy with it and that's what counts.  I wasn't trying to do something everybody would want. Here's a few shots of what I did,
I have to say that came out pretty bitchin. Great job!!!!


Sent from my iPhone using SoCal Jet Boats

188
WTB / Re: Different fiberglass scoop
« on: October 24, 2014, 07:54:24 PM »
I want one too!!!


Sent from my iPhone using SoCal Jet Boats

189
The No Wake Zone / Expired Craigslist ad
« on: September 24, 2014, 01:15:04 PM »
Does anybody know how to retrieve an expired post from Craigslist?


Sent from my iPhone using SoCal Jet Boats

190
Boat Racing / Re: The orangegasm team is off to oregon tomorrow.
« on: August 20, 2014, 10:32:13 PM »
Good luck Jake kick some ass and drive safe!!!


Sent from my iPhone using SoCal Jet Boats

191
Engine Mechanical / Electrical / Polishing
« on: August 10, 2014, 11:46:10 PM »
Anybody know somewhere that does polishing in Havasu? Need my heads and tunnel ram done.


Sent from my iPhone using SoCal Jet Boats

192
Engine Mechanical / Electrical / Re: Finally getting over my pity party
« on: August 10, 2014, 11:25:43 PM »
Does anybody have an idea how much I'm looking at to repair this thing?


Sent from my iPhone using SoCal Jet Boats

193
Engine Mechanical / Electrical / Re: Finally getting over my pity party
« on: August 07, 2014, 08:38:37 AM »

Quote from: GT Jets on August 07, 2014, 07:28:39 AM
Rod came up and broke the cam.....

Sent from my SGH-T989 using SoCal Jet Boats mobile app
Yep


Sent from my iPhone using SoCal Jet Boats

194
Engine Mechanical / Electrical / Finally getting over my pity party
« on: August 07, 2014, 05:55:27 AM »
Well it only took me almost 3 months but I managed to get the motor out and tore down.
How often does the small end of a rod let go? But that's what happened. Also I think the timing chain let go haven't got the front tore down yet. When I turn the crank the cam doesn't move.
Damage list-
3 exhaust valves bent
4 roller lifters broke
1 rod let go (the small end) big end looks good no spun bearings
Cams damaged and I think the timing chain let go
Oil pick up was just dangling (the screen)
Blocks bad cracked cylinder wall
1piston
I think the crank is good just need to have it check out for straightness.
Needs-
4bolt mkIV block
1 rod
Set of pistons and rings
Bearings and new rod bolts
3 new exhaust valves
Timing chain and gears
Roller cam
4 roller lifters
Rod and main bearings
Machine work and balancing check the crank
Now oil pick up
So all in all I'm feeling pretty good about it. I thought it was going to be a lot worse.
Oh yeah gotta weld up my windows in my pan.
Photos to come soon


Sent from my iPhone using SoCal Jet Boats

195
Engine Mechanical / Electrical / Re: Water in oil
« on: June 06, 2014, 01:05:46 AM »

Quote from: MorePower on June 05, 2014, 11:11:11 PM
Did the same exact thing with my motor.... Thought it was the headers, went dry still came back, reseated timing cover, then I got the good oil finally coming out.
All was good Until I actually got on the water. Ended up being head gaskets

The oils changes show the improvement, but was false comfort


Sent with my Fingers
Got water in my oil. I wish it was a head gasket👎👎👎


Sent from my iPhone using SoCal Jet Boats

196
Events / Re: Big River Fathers Day Weekend 2014
« on: May 22, 2014, 02:59:05 PM »

Quote from: jyeager on May 20, 2014, 04:53:55 PM
cant wait for this one. Ill be rolling up with my pops on saturday in the dimarco!   ;D ;D ;D
Right on Jake I'll be there with my buddy in his Miller


Sent from my iPhone using SoCal Jet Boats

197
Random Boat Parts For Sale / Re: Hot Sauce cleaner/sealent
« on: May 09, 2014, 12:41:08 AM »

Quote from: Cliffjumper on May 08, 2014, 11:03:11 PM
Good stuff

Sent from my SPH-L720 using SoCal Jet Boats mobile app
X2 on that. It works great!!!


Sent from my iPhone using SoCal Jet Boats

198
Events / Re: SCJB @ The Avi May 9-11, 2014
« on: May 06, 2014, 07:08:00 PM »

Quote from: michaelshane on May 06, 2014, 06:20:53 PM
It's 13-1 compression 496 stroker cam is 11-745-9 (big)! eagle rods, callies forged crank, Jessel valve train! All the best stuff I don't build junk! I just didn't want to see him beat the bearings out of it running avgas it was set up on E85 but u can get it in havasu so I jetted it for race gas 110!
Considering you told me as long as I wasn't squeezing it av gas was fine when I picked it up from you. How would I know otherwise. What part of AS IS don't you understand. Get over it. If you didn't want to do the trade you should of said no!!! You follow me everywhere I go online. It's really getting old. I'm sure Brad won't put up with your BS here. That's not what this sites about. So really get the f*#k over it bro. And if you listen to the video you sent me before I got the boat you can hear the popping in your transition. See you there!!!!


Sent from my iPhone using SoCal Jet Boats

199
Events / Re: SCJB @ The Avi May 9-11, 2014
« on: May 06, 2014, 09:17:25 AM »
Thanks guys I think for 2.59 more a gallon. I'll be carrying fuel with me.


Sent from my iPhone using SoCal Jet Boats

200
Events / Re: SCJB @ The Avi May 9-11, 2014
« on: May 06, 2014, 05:33:09 AM »
Does anyone know if there is Av gas available anywhere near the Avi or should I haul some with me. Thanks Tad


Sent from my iPhone using SoCal Jet Boats

Pages: 1 ... 6 7 [8] 9 10 ... 35

Null

SMFPacks CMS 1.0.3 © 2026