Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 429heads

Pages: 1 [2] 3 4 ... 9
26
Engine Mechanical / Electrical / Re: SBC Heads
« on: June 18, 2009, 07:12:02 PM »
do you have pictures of the Stahl flanged headers to the Chevy Heads. am not
up on them  :banghead: any small block header that is port matched to heads will
work i f the ex port is opened up to same size.

27
Engine Mechanical / Electrical / Re: SBC Heads
« on: June 18, 2009, 03:52:53 PM »
Greg post some pictures here  some pictures of some bows in my shop the ex port are all the same now if you have sb2b heads or real race heads there split ex ports and intake like Cleve ford has and dizzz is in front they got it right finally and know longer  to be in
the performance parts,  the heads in the picture have the guides moved or off set for a bigger valves and to help in the push rod set up they will use split guide plates or two piece, picture of the headers to would help the chamber in these heads have been laid back to.

28
Projects / Re: It Freaking Runs WooooHooooo.....BBC 8-71 EFI
« on: June 09, 2009, 07:54:42 PM »
Glad to here it runs, Now why don't  you go for the job down here,  you could run it all the time here in AZ ,  Live on the water cool day's cool night's, No snow to mow, did you get
your paper work yet man put that Deg to use, I can talk to them for you. It would be the best job you will ever get my 02. dam dam 69 and not 59 I would jump on that job so fast :banghead:

29
The No Wake Zone / Did you vote
« on: June 07, 2009, 07:03:40 PM »
1.  OBAMA said that if I voted for McCain the unemployment would go up 15% now
2.  OBAMA said that if I voted for McCain that more homes would end up in for clouser
3.  OBAMA said that if I voted for McCain  that my savings would be gone 401k yes
4   OBAMA said that if I voted for McCain that the national dept would double it has
5.  OBAMA said that if I voted for McCain that it would hurt Big buisness good by G.M.C
               
                 SORRY I VOTED FOR MCCAIN NOW CAN I CHANGE MY VOTE
 
          CHEVY STOCK FROM $90.00 to .29 cents
       Ford owners you now have to pay child support to G.M.C Great-Massif- Cxnt

30
The No Wake Zone / Re: Boat Safety Issues....
« on: June 06, 2009, 12:52:51 PM »
Ray sorry to see your boat like that and thank god no one got hurt some one had to off almost been setting on where the fire started with 4 people in the boat. I remember that some
on here at one time said that old fiberglass tanks could not take this new fuel did this boat
have glass tanks and how old was the boat. I have seen some soft tanks in some of the boats that my son has junked, and my 1970 Sanger flat had glass tanks and has aluminum tanks now. I think ever one should check there tanks, and does any one no is it true a bout this fuel and fiber glass tanks.
 

31
Boat Showcase / Re: My first jet
« on: June 05, 2009, 10:24:56 AM »
 :oGOOD looking Boat And its A Ford and not A dead   Govern  Ment  Corps  >:D

32
The No Wake Zone / OLD SONG
« on: June 02, 2009, 09:36:44 AM »
OLD SONG SEE THE USA IN YOUR CHEV ROLEY TO DAY ;D
 
NEW SONG SEE USA CHEV ROLEY IN B-K TO DAY. :banghead:
 
YOUR US GOVERNMENT AT WORK
 
TERM LIMIT CONGRESS NEVER NEVER REELECT THEM SOB&HOR
TENURECORRUPTS :mad:
 

33
The No Wake Zone / Boat Anchor
« on: June 01, 2009, 10:26:49 AM »
Headed to the river with old boat,  River Anchor, test set up to see if will hold, left studs in to help hold boat in place I keep for getting to  pull them up, O WELL there's lots  Chevy
blocks and heads at home, they make good fishing reefs     :banghead:

34
Jet Pumps / Re: Painting Pump
« on: May 27, 2009, 07:22:38 AM »
IS THAT UTTER PINK ;D

35
Look at sale on performance boat site. Parts spam FORD garage sale 460 short block $600.00 He has lots of parts,
(Al heads$1500 with cam ), new rods, oil pan  crank.  ;D

36
OPPS good EYE must of been were water came in, May be frist rebuild block was not bored
 big enough.

37
 I would have the block jet washed and then clean all the oil gal lies my self, I would take the crank to someone like Dougan's Engines & machine (951 681-1961)
  in Pedley= Riverside and have them polish the crank
and or mike the crank and they can turn the crank, will tell you if the block can be honed or bored, Big Paul
has been there over 25 years and they do top line work, For lot's of race teams. And Paul is a FORD Man,   
 I would buy the Ford  or the ARP oil pump Drive 7/16" Heavy duty. Chrome moly, centerless ground rod part # m-6605-a429 it wont fall in to pan and it fits in the block 
dosen"t lay over dizzy goes in and out with no broblemess,  :banghead:YOU wont here that rod hit oil pan bottom it can even be put in from the top, Doesn't use the WE call the lock on the shit shaft, And it looks like round rod with hex drive stuck in each end, One of the best replacement parts you can buy and I have never seen one brake ether. Did you cut the oil filer and take a look in it, Good luck on the rebuild.
 

38
The No Wake Zone / gun & ammo
« on: May 20, 2009, 03:17:40 PM »

Whether you hunt or not - this has more to do with this country
than hunting.........haven't checked this out yet but maybe this is why
ammo is getting harder to find.....
 
________________________________



 
 
 
Ammo-less Firearms Alert
 
 
You might want to send this to all your hunting buddies family &
friends.


Nobody can sell any ammunition after June 30, 2009 It has already
started....
Ammunition Accountability Legislation
Remember how Obama said that he wasn't going to take your guns?   
Well, it seems that his allies in the anti-gun world have no problem
with taking your ammo!
The bill 20 that is being pushed in 18 states (including Illinois and
Indiana ) requires all ammunition to be encoded by the manufacture a
data base of all ammunition sales. So they will know how much you buy
and what calibers.
Nobody can sell any ammunition after June 30, 2009 unless the ammunition
is coded.
Any privately held un coded ammunition must be destroyed by July 1,
2011.  (Including hand loaded ammo.)   
They will also charge a .05 cent tax on every round so every box of ammo
you buy will go up at least $2.50 or more!
If they can deprive you of ammo they do not need to take your gun!
________________________________



This legislation is currently pending in 18 states:   
Alabama, Arizona ,  California ,  Connecticut , Hawaii , Illinois ,
Indiana, Kentucky , Maryland ,  Mississippi , Missouri ,
New Jersey, New York , Pennsylvania , Rhode Island ,
South Carolina, Tennessee , and Washington .

39
Was this the motor that you had built and the builder was to do the cam break in for you?
 Did he break it in or not, Did you use light weight springs for cam break in and did you
replace them after cam break in with right spring?. I would check cam real close . Thanks to Ralph Brunt we send are cams  out to cam research to get broken in. Cam is ready to race when you get it back cost with shipping $80 . I don't have to change springs don't have to worry about losing A  $3000.00 up lower end set valves and go race and not
worry about the cam. Heads are set with SBC band seals on valve stem tight against the
top of the guide at second or third race we pull valve springs and can measure the distance form guide top too  bottom of seal tells me if cam is worn the same rockers are
given full lift and we use 1.5 & 1.6 rockers and some times 4-7 cam. AND again thanks to
 RALPH for info on here on cam break in by Cam RESEARCH they use a CAM KING to break in your cam  I think you have valve trouble
  and shit can the plugs I took you pictures to photoshop and changed them plug 7 has some kind of deposite on it beads #3 to #2
same could Be the picture to. What tem does ex ports header run at have you tem shot them cold cylinder will tell a lot most of ares  run
350 450 temp on port each port.

40
My self if I had a motor that ran 1 or 2 min with out oil OR MORE  :banghead:, It would get complete take down and inspection and all new berg put back, even if they look good, black is not good ether. Check cam to see if is flat ??? And clean it all oil galleys.
 I just saw 1 to 2 min or more that it got hot to, and that you came back in under load back to dock.

41
Question  #1 what oil pan is on this motor stock or after market 10qt or?????????
     
              # 2 Is that msd dizzy in the motor????  be shore to check the drive gear on
                dizzy to see if  drive pin is OK????? I have seen shaft broken and pin on dizzy
         
              #3 If stock pan and some used them I would not use a high volume
                   pump my O2 on that
 
             #4 check cam drive gear to see if worn bad ????
 
            #5 Use a heavy duty oil pump drive hex not a stock one !!!!
 
            #6 How long did motor run with no oil pressure ??????
     
           #7 Its hard to see if any  water was in top end. If ever thing turns out OK
           
            #8 Be sure to roll you push rod on flat surface to see if any are bent
 
          #9  Turn motor over see if all piston come to top no bent rods
   
          #10 check berg to , clean head and block surface real good !
       
          #11 cut oil filter and check for metal in it will tell you a lot 

42
The No Wake Zone / New FORD Truck
« on: May 17, 2009, 08:27:52 PM »
Got me a new truck! I bought a new Ford F-150 Crew Cab and returned to the dealer yesterday because I couldn't get the radio to work. The salesman explained that the radio was voice activated. 'Nelson,' the salesman said to the radio. The radio replied, 'Ricky or Willie?' 'Willie!' he continued and 'On The Road  Again' came from the speakers. Then he said, 'Ray Charles!', and in an instant ' Georgia On My Mind' replaced Willie Nelson. I drove away happy, and for the next few days, every time I'd say, 'Beethoven,' I'd get beautiful classical music, and if I said, 'Beatles,' I'd get one of their awesome songs. Yesterday, some guy ran a red light and nearly creamed my new truck, but I swerved in time to avoid them. I yelled, 'Ass Holes!' Immediately the Iranian National Anthem began to play, sung by Jane Fonda and Barbara Streisand, backed up by Michael Moore and The  Dixie Chicks, with John Kerry on guitar, Al Gore on drums, Dan Rather on harmonica, Nancy Pelosi on tambourine, Harry Reid on spoons, Bill Clinton on sax and Ted Kennedy On Scotch. Damn, I LOVE this truck! :mad:


43
photo

44
Engine Mechanical / Electrical / Re: 460 shuts off
« on: May 17, 2009, 12:51:02 AM »
 I never drink and drive the car the truck OR the (FLATBOTTOM Boat never never)just
 when I use this CoMPUTTER dam thing will make any one DRINK  :mad:

45
Engine Mechanical / Electrical / Re: 460 shuts off
« on: May 17, 2009, 12:13:52 AM »
AIR , FUEL , SPARK , Drunk yes But still can make a FORD RUN , EVEN MAKE
A SBC WIN RACES GOOD OLD BABBIT BITCHES, # 18 second place car Fortmohave
Race way , and the # 20 car HA HA LAST YEAR CHAMP. MY HEADS :banghead:

46
Lake Mead / Re: Anyone from California going to Mead for Memorial??
« on: May 16, 2009, 11:50:49 PM »
Will be in Riverside on the 31 may and back in fort mohave on the 11 June if that will help
let me know any one want a boat moved I go to riverside every month can bring trailer tires ,
fenders, all sorts boat parts to, Let me know Can even store your boat for you here in
fortmohave Az, We sale new axels, hubs, fenders, tires and wheels, led lights, wiring harness, bearing buddies, trailer jacks, etc.
For all your trailer parts needs call us at 951-906-3034 or 928 763 6942


47
Engine Mechanical / Electrical / Re: 460 shuts off
« on: May 16, 2009, 10:35:54 PM »
WHY do you have a ballast bar on a FORD they don't use one they have restore wire my 02 through ballast in the river and wire it like a Ford not a half bread Ford used a restore wire not ballast bare
must of been a Chevy guy wired it check with jumper wire, if it is Chevy tufluck...

48
Thanks Ray pm to be sent

49
How much on carbs need a set for my 427 FE  H- M cross ram, And water pump plate for a for 460 v drive.  :banghead:

50
Well I got this Email from mike on 460 Ford it is on it way to his boat. ;D

Hey There,
                This is Michael & I met with your son Richard today & I got that 460 I also talked with him a bit about work &  told him I could email him my reseme but his  internet isn't up so he asked me to send it to you.   
                 I just want to thankyou so much for all the help  . I'll be keepin in touch Let me know the best address that I could send my reseme to wen you can.. Thanx again
                                Michael, River, & Josh


Pages: 1 [2] 3 4 ... 9

Null

SMFPacks CMS 1.0.3 © 2026