Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - boscoooo

Pages: 1 [2] 3 4 ... 9
26
Engine Mechanical / Electrical / Re: Motor doesn't want to start!
« on: May 05, 2014, 08:37:11 PM »
I cleaned out the jets and pulled the bowls off and cleaned them and I haven't changed I haven't touched the timing at all and nothing could have hit it hard enough to move it


Sent from my iPhone using SoCal Jet Boats

27
Engine Mechanical / Electrical / Motor doesn't want to start!
« on: May 05, 2014, 08:14:48 PM »
I have a 460 motor and I haven't messed with it much sense October and I'm trying to get it fired up and its start to fire up and then back fires.
So I cleaned the old gas out and cleaned the carb checked the plugs and wires they seemed fine. I'm thinking it's a timing issue but when it comes to timing I'm about useless. Also I just went to give it another shot and and I noticed the carb is now leaking pretty bad I'm guessing it might be from it back firing because it wasn't doing it before
Thanks Alex.

Sent from my QMV7A using SoCalJetBoats mobile app


28
WarZone / Re: Who used to roll in a truck club
« on: May 05, 2014, 01:06:17 PM »

Quote from: GeneralLee on May 05, 2014, 12:53:53 PM
Was actually contemplating for a while slapping a 6.0 powerstroke in a jet boat. Maybe one of these days...One can only dream hehe.


if I remember right I think miller marine diesel's put a dura max in a cheetah deck boat


Sent from my iPhone using SoCal Jet Boats

29
SoCal Lakes / Re: Puddingstone 5/4
« on: May 04, 2014, 03:14:35 PM »
im in rancho cucamonga so its 15 20 min away from me to go test unlike going to Elsinore that almost an hour away 

30
SoCal Lakes / Re: Puddingstone 5/4
« on: May 04, 2014, 10:54:03 AM »
Quote from: Havasukona455 on May 04, 2014, 10:24:26 AM
I'll be testing here today before next weekend. Wanted to go to Elsinore but we have some things to do today so the local watering hole is gonna have to do. Anybody gonna be doing the same ?


Sent from my iPhone using SoCal Jet Boats
I live like 15 min from puddingstone but ive never been on the lake i normally go out to Elsinore to test. does puddingstone do boat inspection to get on the water?

31
SoCal Lakes / Re: Any one going to Elsinore sat 4/26?
« on: May 02, 2014, 12:58:27 PM »
Were gonna try and make it out there again hopefully will make it lol I got some new tires for the trailer. Were gonna be on and off fairly early but look for my whit and orange turd


Sent from my iPhone using SoCal Jet Boats

32
SoCal Lakes / Re: Any one going to Elsinore sat 4/26?
« on: April 27, 2014, 08:30:07 AM »
Well we didn't make it out yesterday got a blow out ten min into the drive and the spear had like no air so we called it for the day 


Sent from my iPhone using SoCal Jet Boats

33
SoCal Lakes / Any one going to Elsinore sat 4/26?
« on: April 25, 2014, 06:19:29 PM »
I'll be out at Elsinore Saturday testing the boat I hope the rain holds off but A little water never hurt anyone.


Sent from my iPhone using SoCal Jet Boats

34
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 25, 2014, 06:05:48 PM »
I appreciate the offer pat but the parts I got worked perfect


Sent from my iPhone using SoCal Jet Boats

35
The No Wake Zone / Re: SoCal live thread
« on: April 24, 2014, 11:48:13 PM »
It was stock the sticker was the same lettering as the hats. It's was around 6 pm on foothill


Sent from my iPhone using SoCal Jet Boats

36
The No Wake Zone / Re: SoCal live thread
« on: April 24, 2014, 11:08:05 PM »
I was gonna say it was someone wife driving. i gave her a 👍and tried to day nice sticker but I think the thought I was just a crazy person lol


Sent from my iPhone using SoCal Jet Boats

37
The No Wake Zone / Re: SoCal live thread
« on: April 24, 2014, 10:50:10 PM »
Who has a white Tahoe with an scjb sticker on the back an lives in Rancho Cucamonga?


Sent from my iPhone using SoCal Jet Boats

38
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 22, 2014, 10:39:56 PM »
Thank you sir. And it if doesn't work Tpltrbl303 (Todd) is dropping me off a complete steering kit tube from a wj pump on his way to Parker on thursday. But I'm very interested not to find out if I was doing it wrong. 


Sent from my iPhone using SoCal Jet Boats

39
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 22, 2014, 10:22:22 PM »

Quote from: GT Jets on April 22, 2014, 10:12:10 PM
If you look at the threads on the inside of the nut, the old nut had flattened threads. That particular deal needs to be installed to the other end. Pull the cable nut off and the tube out and thread the new nut all the way on. I hope I am not steering you in the wrong direction, but there is no way it will take you more than 30 minutes to remove it and try it the other way...

I have the absolute most difficult time in the world believing it wont work.  The cable nut is the same exact threads as the tube... As is the Berkeley nut.

If I am wrong, I totally apologize... Did the old nut come off of that side, or did it split off?.

GT
ill give that a shot first thing tomorrow morning. And the old be was jb welded together and some how put on so as soon as went to take it off it broke in half. But looking at the threads look the same to me also I just never though to try it the other way.
And there's no reason apologize your the one helping me out here so right or wrong I appreciate it the help


Sent from my iPhone using SoCal Jet Boats

40
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 22, 2014, 10:06:27 PM »

Quote from: GT Jets on April 22, 2014, 09:09:05 PM

Dude... Hate to disagree with you on an open forum, but the nut is the same exact thread as the steering cable.... Same nut, I am almost positive of it.

GT
GT I have no issue you with you disagreeing with me if I'm wrong I want some one to tell me I am that how you learn right. I'm just saying the one that we pulled off the berk pump didn't fit. It was just a hair to small it wouldn't fit on to the tube. And it's hard see the pictures crapy but that's as far as it will push on


Sent from my iPhone using SoCal Jet Boats

41
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 22, 2014, 03:50:41 PM »
im in rancho cucamonga and i work half way between the 10 and the 210 so i could meet you or my girlfriend lives in Yucaipa so if i cant meet you i could get her to probably meet you
if you wanna shoot my a call or text 909-202-9991 that would be awesome thanks man

42
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 22, 2014, 01:45:21 PM »
alright man ill let you know im almost to that point  :banghead:

43
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 22, 2014, 09:38:11 AM »
It just doesn't fit on to the tube


Sent from my iPhone using SoCal Jet Boats

44
Random Boat Parts For Sale / Re: Steering tube nut for jacuzzi needed!!
« on: April 21, 2014, 11:16:59 PM »
Yeah it looks just like that but the berk one is to small. I thought I lucked out me buddy had an extra one from a project boat.


Sent from my iPhone using SoCal Jet Boats

45
Random Boat Parts For Sale / Steering tube nut for jacuzzi needed!!
« on: April 21, 2014, 11:05:26 PM »
Does anyone happen to have a steering tube nut for a jacuzzi wj pump. I can't seem to find just a nut an everyone wants to sell me the hole kit for one parts and the kits like 80 bucks
Thanks alex


Sent from my iPhone using SoCal Jet Boats

46
The No Wake Zone / Re: NEW 2014 SCJB Shirts
« on: April 17, 2014, 07:34:13 PM »
I got my hat and my shirt in today thanks a lot brad they kick ass


Sent from my iPhone using SoCal Jet Boats

47
Engine Mechanical / Electrical / Re: 350 sbc is toast
« on: April 17, 2014, 11:40:38 AM »

Quote from: boscoooo on April 17, 2014, 09:46:22 AM
Xx


Sent from my iPhone using SoCal Jet Boats
sorry had the app open in my pocket


Sent from my iPhone using SoCal Jet Boats

48
Engine Mechanical / Electrical / Re: 350 sbc is toast
« on: April 17, 2014, 09:46:22 AM »
Xx


Sent from my iPhone using SoCal Jet Boats

49
Projects / Re: 21' Ultra Openbow Project
« on: April 10, 2014, 07:46:07 PM »
You need to ditch the bow seats completely and throw in a stripper pole👍


Sent from my iPhone using SoCalJetBoats

50
The No Wake Zone / Re: BOAT the meanings
« on: April 08, 2014, 06:55:45 PM »

Quote from: Cliffjumper on April 08, 2014, 05:36:32 PM
These are good

Sent from my SPH-L720 using SoCal Jet Boats mobile app
ahahah my girlfriend sent me this yesterday morning. Can you tell she grew up in a Chevy family


Sent from my iPhone using SoCalJetBoats

Pages: 1 [2] 3 4 ... 9

Null

SMFPacks CMS 1.0.3 © 2026