Show Posts

26

Jet Pumps / Re: Sputtering problem suggestions anyone

« on: August 16, 2017, 03:05:35 PM »

My gauge reads 14 when its on just replaced it in april....

Sent from my SM-G930T using SoCal Jet Boats mobile app

27

Jet Pumps / Re: Sputtering problem suggestions anyone

« on: August 16, 2017, 02:09:12 PM »

Okay fellas, so i rewired boat, new spark plug cables,new plugs. I took it out today and i ran flawless for bout 10 mins and bang, its starts sputtering and and idling unstable...would my coil and module b my problem? There fairly new aswell...need suggestions getting freakin frustrated...lol

Sent from my SM-G930T using SoCal Jet Boats mobile app

28

Jet Pumps / Re: Sputtering problem suggestions anyone

« on: August 09, 2017, 09:05:25 PM »

So im taking it that this has been the issue, although this wire didnt melt my last run when it was giving me problems because i do a full check before i went out this morning

Sent from my SM-G930T using SoCal Jet Boats mobile app

29

Jet Pumps / Re: Sputtering problem suggestions anyone

« on: August 09, 2017, 09:01:28 PM »

Its all good... so i hope i found the problem lol...at least the smoking part....found wire going to bilge fried and along the way burnt into the white ignition and red power... ordering new harness from cp

Sent from my SM-G930T using SoCal Jet Boats mobile app

30

Jet Pumps / Sputtering problem suggestions anyone

« on: August 09, 2017, 11:28:57 AM »

So i been chasimg this damn sputter for a couple momths now....runnimg a 460, claysmith mild cam, 60 over kb pistons...just rebuilt.. new fuel pump, 5.5psi fuel, new plugs and wires, pertronix ignition with 6 month old coil...6 month old cap and rotor...the boat runs hard for the first 5 mins with a lil sputter after that i notived started getting worse and started seeing and smelling smoke under dash...im thinking its ignition problem ot sure...any suggestions really stumped maybe wiring?

Sent from my SM-G930T using SoCal Jet Boats mobile app

31

WTB / Re: need a bilge pump.

« on: July 31, 2017, 01:48:49 PM »

Walmart sells some as well

Sent from my SM-G930T using SoCal Jet Boats mobile app

32

Projects / Re: 73 avenger rub rail problems

« on: July 30, 2017, 05:30:39 PM »

Same happeed to mine in areas and put some screw anchores size of hole and put a screw thru rail put back rubber...it worked for me 2 yrs still holding

Sent from my SM-G930T using SoCal Jet Boats mobile app

33

Jet Pumps / Re: Berk seized oil fill plugs

« on: July 28, 2017, 03:59:04 PM »

I put some pb blast, clesned it heat it up for a couple minutes with torch used some vice grips came right off then replaced

Sent from my SM-G930T using SoCal Jet Boats mobile app

34

Engine Mechanical / Electrical / Re: Rattle noise even after new pump bearing

« on: July 12, 2017, 10:17:58 PM »

I just recently did the same thing did a complete pump rebuild and i hear a rattle kinda vibration in 1300 rpm gas and boats rans real hard....i hope its common

Sent from my SM-G930T using SoCal Jet Boats mobile app

35

The No Wake Zone / Re: Anyone live in Elsinore?

« on: July 11, 2017, 11:02:22 AM »

Everybody told me the same thing when i did it 5 yrs ago...i commuted from elsinore to hawthorne 5 days a week. Didnt mind it coming home to a house 4 times as big as what i rented back in LA....just 2yrs ago i cut my commute in half and living has never been better...stay away from the weztside unless its mcvicker or a shoreline property....im renting a house in the north side, good area...goodluck, oh did i mention im in the water rooster tailing 10 mins after i hook my boat to truck!!!!🤗

Sent from my SM-G930T using SoCal Jet Boats mobile app

36

WTB / Re: 3 3/8 Tach sale trade or borrow!!!

« on: July 06, 2017, 12:09:19 PM »

I have one...worked ok u can have it im in elsinore

Sent from my SM-G930T using SoCal Jet Boats mobile app

37

Jet Pumps / Re: In need of impellar shaft and driveline yoke

« on: June 01, 2017, 09:28:54 AM »

Quote from: GT Jets on May 31, 2017, 10:59:46 PM

If that deal let go under power, replace everything.

JMHO.

GT

Sent from my SM-G900V using SoCal Jet Boats mobile app

Replace everything as far as new drive shaft... do u also mean pump too

Sent from my SM-G930T using SoCal Jet Boats mobile app

38

Jet Pumps / Re: In need of impellar shaft and driveline yoke

« on: May 31, 2017, 06:05:54 PM »

Quote from: dboranch on May 31, 2017, 05:10:56 PM

Im not sutr what happened to the jet section but it just lookes like yoir center section was damaged and the engine yoke is for a 460 pto.

Sent from my SM-G930V using SoCal Jet Boats mobile app

Mine completly went powww!!! I need a complete drive line if u have it

Sent from my SM-G930T using SoCal Jet Boats mobile app

39

Jet Pumps / In need of impellar shaft and driveline yoke

« on: May 31, 2017, 10:50:24 AM »

In need of an impellar shaft anyone have one laying around...my pump is a 12je-a...this last weekend bent the shaft when driveline broke to shit....any help would b great or suggestions...also any other suggestions of things i should check after this failure...

Sent from my SM-G930T using SoCal Jet Boats mobile app

40

SoCal Lakes / Re: Green drink

« on: May 23, 2017, 07:37:47 PM »

Quote from: king295 on May 23, 2017, 01:59:14 PM

Going to try and hit Elsinore on Monday morning for the first shake down run in the new float. Not really wanting to do it on a holiday but my time is limited so will probably give it a shot. What will be the quietest launch ramp first thing in the morning, if any? Weekend Paradise maybe?

Ill b there all weekend paradise prolly gonna be packed...early morning at la marina best bet...

Sent from my SM-G930T using SoCal Jet Boats mobile app

41

Engine Mechanical / Electrical / Re: 454 Acceleration issue

« on: May 15, 2017, 11:33:26 AM »

Definetly start with carb...after my rebuild i guess motor wanted more gas...seems that my carb bowls were running out of fuel...raised the float level problem fixed...just a suggestion

Sent from my SM-G930T using SoCal Jet Boats mobile app

42

SoCal Lakes / Re: Green drink

« on: May 13, 2017, 11:03:03 AM »

Quote from: surfrat45 on May 12, 2017, 09:29:25 PM

I'm going to try for Monday, first time in the water for the new float

Sent from my SM-G920T using SoCal Jet Boats mobile app

Ill make it out if u guys come out...

Quote from: Shocker_04 on May 12, 2017, 08:08:08 AM

If anyone plans on playing hookie on Monday, I might try to take the new float out there for an hour or 2.

Sent from my SM-G930T using SoCal Jet Boats mobile app

43

Boats For Sale / Re: Rogers Super Cyclone

« on: May 04, 2017, 06:49:09 AM »

Quote from: JordanDangerfield on May 03, 2017, 04:21:17 AM

Still for sale. Actually pulled it out of storage and will probably be at Elsinore tomorrow.

Send me a PM for more info

Sent from my iPhone using SoCal Jet Boats mobile app

You coming to elsinore today? Ill meet u out there, gonna b hot!

Sent from my SM-G930T using SoCal Jet Boats mobile app

44

SoCal Lakes / Re: Green drink

« on: April 26, 2017, 08:43:38 AM »

Quote from: redlog701 on April 25, 2017, 05:28:23 PM

Does it get pretty choppy mid day?

I see the lake everyday, on sunday was pretty rough but other than that water been pretty melo on chop👍👍👍especially if u go between 7-9 glass!

Sent from my SM-G930T using SoCal Jet Boats mobile app

45