Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jrankin

Pages: 1 [2] 3
26
Engine Mechanical / Electrical / Re: 454 intake manifold
« on: September 25, 2016, 01:23:48 PM »
Mine was doin the same, distributor was my problem. Picked up a marine pretonix off Amazon one day shipping. Will be here today.


Sent from my iPhone using SoCal Jet Boats

27
Engine Mechanical / Electrical / Re: What msd is best for my application
« on: September 23, 2016, 07:49:05 PM »

Quote from: GT Jets on September 23, 2016, 06:32:56 PM
I like the ready to run MSD, have used it a few times,  also look into the Pertronix units


I don't think anyone asked,  is this a closed engine deal? (Doubt it).

You mean engine hatch. No all open, and do I need to run a Marine or no?


Sent from my iPhone using SoCal Jet Boats

28
Engine Mechanical / Electrical / Re: What msd is best for my application
« on: September 23, 2016, 05:34:49 PM »

Quote from: nwolt01 on September 23, 2016, 05:07:01 PM
You can run a DUI.  Send them your info and they tune them to your specs.

Do they have rev limiter?


Sent from my iPhone using SoCal Jet Boats

29
Engine Mechanical / Electrical / Re: What msd is best for my application
« on: September 23, 2016, 05:05:08 PM »
Yes the Hei with rev limit built in.


Sent from my iPhone using SoCal Jet Boats

30
Boats For Sale / Re: **Restored 1977 Centurion 18' Bubble deck Jet **
« on: September 23, 2016, 03:52:12 PM »
Beautiful boat! Have to say cleanest one I've seen, and cheap if you ask me. You probably have that much in paint and motor alone.


Sent from my iPhone using SoCal Jet Boats

31
Engine Mechanical / Electrical / What msd is best for my application
« on: September 23, 2016, 03:36:39 PM »
I need new ignition. This is what I have and wondering what you guys thing would be best for my budget of $500.00

Motor 468 BBC forged crank, rods, flat top .60 over positions. 049 heads all stainless valves, springs, roller rockers. 11:1 compression. Cam is 600 range and 580. 750 Dave Lang built holly carb. Hp guess 525 range.

Looking at RTR pro billet HEI with built in rev limiter. Or  what do you guys think is best for what I'm running? Pump berk 12-JG A cut droop and Divertor, with ride plate...


Sent from my iPhone using SoCal Jet Boats

32
Engine Mechanical / Electrical / Re: 454 high TQ starter.
« on: September 20, 2016, 11:51:08 AM »
Thanks guys, used the link Glen sent, found 3hp mini on there
It will be here Friday. Thanks GT!


Sent from my iPhone using SoCal Jet Boats

33
Engine Mechanical / Electrical / Re: 454 BBC Rebuild
« on: September 20, 2016, 11:38:10 AM »
Try Wayne's in riverside, Wade knows his stuff. He has built mine and few for my buddy's. His son is part of the group. Wade Jr. They can tell you what you need and they are priced right!


Sent from my iPhone using SoCal Jet Boats

34
Engine Mechanical / Electrical / Re: Terminal block rewiring boat
« on: September 19, 2016, 07:14:41 PM »
Ok thanks!


Sent from my iPhone using SoCal Jet Boats

35
Engine Mechanical / Electrical / Re: 454 high TQ starter.
« on: September 19, 2016, 06:29:39 PM »
Think builder told me 11:1, I don't think it has that much but would have to test myself. With the way I wired the boat I need 3 point solenoid on the starter.


Sent from my iPhone using SoCal Jet Boats

36
Engine Mechanical / Electrical / 454 high TQ starter.
« on: September 19, 2016, 04:34:49 PM »
Hey guys, starter is bad, what are you guys running for high TQ starters, and where to buy?


Sent from my iPhone using SoCal Jet Boats

37
Engine Mechanical / Electrical / Re: Terminal block rewiring boat
« on: September 18, 2016, 10:49:26 PM »

Quote from: Oliver1421 on September 16, 2016, 07:47:07 PM
I'm kind of a wiring nut though. Here's a dash I just did a last week for a customer.  Personal message me if I can help in any way.
Cheers!


Sent from my iPhone using SoCal Jet Boats


Hey bud, doing the re wire and want to use a aux solenoid, What solenoid should I get? This is the diagram I'm using to rewire, and I'm 30 amp reset breaker, running 14 gauge instead of 16 because I already had, and using 10 where it's listed to use. Thanks in advance. 


Sent from my iPhone using SoCal Jet Boats

38
Engine Mechanical / Electrical / Re: Terminal block rewiring boat
« on: September 17, 2016, 03:14:37 PM »
Yup that's clean!!!


Sent from my iPhone using SoCal Jet Boats

39
Engine Mechanical / Electrical / Re: Terminal block rewiring boat
« on: September 16, 2016, 06:14:51 PM »
This what your talking about?


Sent from my iPhone using SoCal Jet Boats

40
Engine Mechanical / Electrical / Re: Terminal block rewiring boat
« on: September 16, 2016, 01:07:48 PM »
That's a good idea, I was doing plug and play, but hidden behind the panel. I got bigger block, so I can add radio and interior lighting later.


Sent from my iPhone using SoCal Jet Boats

41
Boats For Sale / Re: Looking for a Miller Or Rogers Jet Boat
« on: September 15, 2016, 05:28:59 PM »
Oh didn't see it said no motor.. they are hard to find I searched for 9 months only found 2, both hulls where junked. Would of had to spent 15k just to get hulls in shape and motors in them.


Sent from my iPhone using SoCal Jet Boats

42
Engine Mechanical / Electrical / Re: Terminal block rewiring boat
« on: September 15, 2016, 02:33:48 PM »

Quote from: mash on it on September 15, 2016, 02:03:03 PM
This might help.

CP Performance-

http://www.cpperformance.com/c-144-terminal-blocks.aspx

http://www.cpperformance.com/c-146-wiring-harnesses.aspx

Dan'l

Thanks that's what I needed!!


Sent from my iPhone using SoCal Jet Boats

43
Engines / Engine Parts For Sale / Re: 850 marine holly
« on: September 15, 2016, 02:27:22 PM »
Was told it was.


Sent from my iPhone using SoCal Jet Boats

44
Engines / Engine Parts For Sale / Re: 850 marine holly
« on: September 15, 2016, 02:11:19 PM »
Riverside


Sent from my iPhone using SoCal Jet Boats

45
Engine Mechanical / Electrical / Terminal block rewiring boat
« on: September 15, 2016, 01:49:54 PM »
Question, I'm rewiring my boat, and getting rid of the stock terminal breaker block. I'm going to put a inline 35 amp block fuse. My question is on the terminal block, I can't find a 35amp only 25 then jumps to 45amp.

What amp terminal bar should I get? Or anyone know where I can get a 35 amp terminal block. Thank you in advance.


Sent from my iPhone using SoCal Jet Boats

46
Engines / Engine Parts For Sale / 850 marine holly
« on: September 14, 2016, 08:33:21 PM »
Have 850 holly marine carb for sale,
$200.00 obo needs rebuild.


Sent from my iPhone using SoCal Jet Boats

47
Boats For Sale / Re: Looking for a Miller Or Rogers Jet Boat
« on: September 14, 2016, 08:24:27 PM »
You could have the boat shipped, I have buddy's who are cops in Dallas who would probably go look at it.


Sent from my iPhone using SoCal Jet Boats

48
Boats For Sale / Re: Looking for a Miller Or Rogers Jet Boat
« on: September 14, 2016, 08:22:28 PM »
Yea that's the boat! Yea that's shady!


Sent from my iPhone using SoCal Jet Boats

49
Boats For Sale / Re: Looking for a Miller Or Rogers Jet Boat
« on: September 14, 2016, 12:33:30 AM »
Texas was on eBay for 7,000 too http://boats-from-usa.com/not-specified/rogers-custom-boats-bonneville-tr-84434]


Sent from my iPhone using SoCal Jet Boats

50
Boats For Sale / Re: Looking for a Miller Or Rogers Jet Boat
« on: September 14, 2016, 12:28:14 AM »
One I found in there Facebook form


Sent from my iPhone using SoCal Jet Boats

Pages: 1 [2] 3

Null

SMFPacks CMS 1.0.3 © 2026