251
SoCal Lakes / Re: Green drink
« on: March 26, 2016, 08:24:02 AM »
Loading up now
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
252
Jet Pumps / Re: Help me talk my friend out of being dumb.
« on: March 25, 2016, 09:52:10 PM »
There you go no excusses
253
SCJB Top 10 List / Re: The List
« on: March 25, 2016, 09:39:51 PM »
With 3 empty spots can't anyone call dewy out and if they loose they still get on the list??
254
Jet Pumps / Re: Help me talk my friend out of being dumb.
« on: March 25, 2016, 09:28:34 PM »
I busted the inside through the outer layer where the bend is on mine steering wheel would turn but the cable would just come outta the housing worst feeling ever at 45mph on Parker strip cruising with out her boats around hard to limp it to shore and use my thinking cap to patch it up but did get it going. Deff not worth it at all I had to drift till I turned and then floor it for the shore/rocks just to get off the river. I did full rack and cable for like 150$ and 1hr of my time and a few beers.
255
Events / Re: Waiting till April to run the boats again?
« on: March 25, 2016, 07:28:30 PM »see you then.. It should be a good turn out on Sunday!
Sent from my iPhone using SoCal Jet Boats
I'm shooting for both days.
256
Events / Re: Waiting till April to run the boats again?
« on: March 25, 2016, 06:28:54 PM »
K sounds good to me.
257
Events / Re: Waiting till April to run the boats again?
« on: March 25, 2016, 05:46:09 PM »
Tomm or Sunday?
258
Events / Re: Waiting till April to run the boats again?
« on: March 25, 2016, 04:56:29 PM »Model training today!! Loves her boat!
Gonna be out this weekend??
259
The No Wake Zone / Re: What did you do to your boat today?
« on: March 23, 2016, 08:26:26 PM »Pulled the motor and sold the hull...
Good bye Liberty, you will be missed.
Sent from my XT1080 using Tapatalk
What did you end up getting for the hull?
260
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 21, 2016, 10:06:50 PM »
K. Is there a way to run it with one sender and suck outta both at once or is that not heard of? Thought that's how they used to all be but may be wrong.
To install another sending unit id have to pull seats and tank and probably drill it out and figure out screws and wire it in to a two way switch on one gauge or something.
To install another sending unit id have to pull seats and tank and probably drill it out and figure out screws and wire it in to a two way switch on one gauge or something.
261
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 21, 2016, 09:45:32 PM »
No one sending unit for fuel gauge. Fuel line off each tank and then to a T one line into the filter/separator then pump then filter then carb. The T is about top of tank height lines dip down to the T and after T loop into separator. Lines come off the top of the tanks
262
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 21, 2016, 09:28:57 PM »
Perfect so think I deff need to separated my tanks I kinda liked the fact of the one sending unit and sucking outta both tanks so it's half but if it's not gonna work I'll do valve
263
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 21, 2016, 09:10:50 PM »
It's now...? I'm confused I can't find anything but the thread seal. Also found that tank to be full and other half empty after last time out I think it may be from my dad sitting on one side while parked but idk. The two tanks are linked to one fuel line sucks outta both tanks equal and one sending unit for gauge.
264
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 21, 2016, 08:26:21 PM »
Now I have what looks like a cork gasket do I need a rubber or same one?
265
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 21, 2016, 08:25:44 PM »
Isn't that thread sealant??
266
Boat Showcase / 77 Liberty powered by bbf 521
« on: March 21, 2016, 07:21:27 PM »
My sending unit on my fuel tank is leaking what's the best fix another gasket or some type of rtv glue. Hopefully I don't have to pull the tank cause I don't think it'll come out without the seats and stuff coming out 15gal tanks shoved under this thing
267
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 15, 2016, 10:46:50 PM »
Yea that's the one haha
My dad sent me that. It was good meeting you guys hope do link up again.
268
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 15, 2016, 10:35:36 PM »
This is me alone idk what the speed was only checked on my way to the dock
270
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 15, 2016, 10:32:33 PM »With the people on the boat, unless you're all wearing Lifelines, yes.
6,000 rpm? What impeller does that thing have in it? I would have thought low 80's.
Where does the water break? How was it riding?
Where is your ride plate set?
She should be feeling pretty free, almost "flighty".
I feel something is a tad "off".
JMO
GT
Idk what impeller is in it wanna say AB cut but I'm no expert on pumps as far as ride plate I don't have one at this time that may help me out . Has loader, impeller,bowl detail work nothing professional but it looks affective, droop and place diverter.
271
Boat Showcase / Re: 77 Liberty powered by bbf 521
« on: March 15, 2016, 09:46:43 PM »
So I put a droop on never checked speed before droop and never dialed in the diverter but just a quick phone check told me 77mph in the middle of Elsinore me my dad and the boy. . I'd like to be faster but we'll get there. Anyone think high 80s close to 90 is unrealistic with my hull without a bottle😜 I'm turning 6,000rpms I'm sure I can squeeze a bit more by myself and trimming the diverter.
272
Events / Re: Waiting till April to run the boats again?
« on: March 13, 2016, 08:03:15 PM »Damn I heard you guys out... everything went wrong with installing my steering helm.. Smh but it's all done now... 77_liberty u let me know when u coming out next... I'll be out there wed, Thursday it's gonna 80 deg...
Sounds good. I work m,t,w and t,Friday gotta do paperwork for my new company and may be out in Glamis next weekend but if not I'll try and make it out noticed my sending unit leaking today so gotta find a gasket or way to stop that
273
Events / Re: Waiting till April to run the boats again?
« on: March 13, 2016, 07:29:18 PM »
Thanks guys gotta do it again I'm always up for a lake day if I'm off work.
274
Events / Re: Waiting till April to run the boats again?
« on: March 13, 2016, 04:12:18 PM »
Nice meeting everyone today. Such a nice day water was super smooth
275
Events / Re: Waiting till April to run the boats again?
« on: March 13, 2016, 09:42:51 AM »
A lil behind but I'll be there soon.