3876
The No Wake Zone / Re: used part pricing
« on: January 20, 2008, 12:12:58 PM »
Soooo.... make me a deal on the oil pan and headers that you bought so cheap 
Cause i need them.
2sav
Cause i need them.
2sav
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
3877
Projects / Re: What grade bolt
« on: January 20, 2008, 08:18:13 AM »
Mine's rated for 2000 lbs
Big boy stuff. Thanks guy's im on my way to the hardware store now.
2sav
Big boy stuff. Thanks guy's im on my way to the hardware store now.
2sav
3878
Projects / What grade bolt
« on: January 20, 2008, 07:39:50 AM »
Do you use to hang your engine on the stand with 
Gonna go get some bolts today and looking for a heads up on what everyone uses.
2sav
Gonna go get some bolts today and looking for a heads up on what everyone uses.2sav
3879
Projects / Re: New Addition to the SCJB Family...
« on: January 20, 2008, 07:03:44 AM »
I like that steering wheel. I got to find me one 
nice boat, has alot of potential
2sav
nice boat, has alot of potential
2sav
3880
Random Boat Parts For Sale / Re: Headers and tanks
« on: January 20, 2008, 06:21:52 AM »
If they was Ford headers, they would be sitting in my closet already
You guy's and you'r chevy stuff
2sav
You guy's and you'r chevy stuff
2sav
3881
Interior / Re: Rack & pinion
« on: January 20, 2008, 05:48:22 AM »
So is this what i need to replace my old steering
And i also want to extend the shaft will it work with this set up?
2sav
And i also want to extend the shaft will it work with this set up?
2sav
3882
Engines / Engine Parts For Sale / Re: BBC Parts
« on: January 20, 2008, 05:26:16 AM »That I believe is Willis Johns here on the board.
And what give's you that clue
2sav
3883
Interior / Re: Rack & pinion
« on: January 19, 2008, 10:48:59 PM »
so i cant just replace the cable then
2sav
2sav
3884
Engines / Engine Parts For Sale / Re: Wanted tunnel ram carbs
« on: January 19, 2008, 10:43:55 PM »3885
Interior / Rack & pinion
« on: January 19, 2008, 05:10:14 PM »
My steering has always been really stiff so i figure now that the boat is all apart, now is the time to fix it. I have the old style i guess you would call it, but can i just change the cable or do you have to buy the whole system? Maybe greasing the steering might help a bit. here's some pics of what i have maybe you can direct me in the right direction before i go buying shit i done need
One more thing can i put a extended shaft adapter on what i have
2sav
One more thing can i put a extended shaft adapter on what i have
2sav
3886
The No Wake Zone / Re: And they want AMNESTY?
« on: January 19, 2008, 04:51:12 PM »
Went to Vegas a few weeks ago. I found this type of stuff posted all over the town.
And we wonder why
2sav
And we wonder why
2sav
3887
WarZone / Re: Hey ya'all watch this (needs a "Darwin")
« on: January 19, 2008, 12:13:06 AM »Whoa!
I fired a 50 cal once, I think the dude called it an elephant gun. Once was all it took for me, with the shoulder pains and all.
Key word "Brake"
With the right Brake you'r re coil is only like a 243 cal
and saves the shoulder.
2sav
3888
WTB / Re: WTB saddle tanks
« on: January 19, 2008, 12:04:46 AM »This is lined up with the holes for the straps, The way it was before it sunk and was stripped and before i got it. Remember i got this boat all torn down and now im trying to put it back together again, not knowing what how or where
2sav
How in the hell did that pic get in there
O'well dont need tanks now2sav
3889
Hulls / Re: Big HP in quarter a stringer boat?????
« on: January 18, 2008, 05:18:55 PM »But sometimes ya gotta do what ya gotta do!
New owner , new set of rules
2sav
3890
The No Wake Zone / Re: Without the Internet
« on: January 18, 2008, 05:08:38 PM »
We would'nt have Ebay 
2sav
2sav
3891
Hulls / Re: Big HP in quarter a stringer boat?????
« on: January 18, 2008, 03:59:04 PM »What exactly can i expect out of this? fock the insurance! i dont get any of it!
Go big, or leave it on the trailer
i am
2sav
3892
Hulls / Re: Removing the rub rail.
« on: January 18, 2008, 11:16:42 AM »Is there a post somewhere about removing the rub rail and fill in the gap and holes the "correct" way as to not get cracks in the paint later on.
Good question, i have the same just didnt want to ask it
2sav
3893
The No Wake Zone / Re: Laughlin SCORE Race
« on: January 17, 2008, 04:52:52 PM »im not really into the laughlin race anymore its getting to be to controlled every year gets worse
Yeah just like the river run
Aint fun no mo2sav
3894
Gelcoat / Paint / Fireberglass Repair / Re: Need Help with Transom Replacement
« on: January 17, 2008, 04:38:26 PM »
I think 1/2 " is good enough and its less weight
2sav
2sav
3895
Engine Mechanical / Electrical / Re: Cam recomendations
« on: January 17, 2008, 04:06:36 PM »
Well here i go again, one step forward and two steps back So be it! it will be done by june i dont care what gas i have to run
Thanks again Paul, Its nice to get your input on this stuff, really helps.
2sav
So be it! it will be done by june i dont care what gas i have to run Thanks again Paul, Its nice to get your input on this stuff, really helps.
2sav
3896
Engine Mechanical / Electrical / Re: Cam recomendations
« on: January 17, 2008, 11:46:40 AM »While a camshaft is usually the first component to go into your engine, it is often the second-to-last component to be selected. A camshaft plays a very important role in an engine and can make or break the combo, hp-wise. Frankly, 2sav, with the number of times that your particular combo has changed I think it would be best for you to absolutely positively acquire all your engine parts for the build--less cam--and then decide on a cam once your cylinder head work is completed.
One more thing, if you are running the .060" over L2443-060's with D3VE heads, your c/r is closer to 10.9:1 and if your block is zero decked c/r jumps to 11.4:1, I don't care what the SPeedPro chart says...it's incorrect.
LO
I am glad you chimed in.
I do have the complete rotating asssembly and next month it will be going to the machine shop and then assembled. The heads will be done at the same time. I read an article in Hot Rod magazine about building a Ford performance engine and it said. If you are not sure about what you are doing or looking for dont be shy. You need to ask questions, EVERYBODY has been at that point where they need to ask a few questions, And that is all im doing
I do appreciate everyone's input and being straight up about it. Thats the only way to be. Yes my build has changed a bit but im on the right track now
atleast i feel good about it now.One more thing, Thanks for the real c/r ratio for the speed pro's, thats a bit higher than i thought it would be , will pump gas be an issue now?
Thanks.
2sav
3897
WarZone / Re: usa today gun poll
« on: January 17, 2008, 10:58:07 AM »
This is one of those threads that will get you'r heart pumpin just thinking about the loss of our weapons to some know nothing politicians who dont give a phuck about gun controll to begin with! its all about money and VOTES to them!!!!
Just think why are we at war Bush is an oil man, you do the math!
Same scenario
2sav
Just think why are we at war
Bush is an oil man, you do the math!Same scenario
2sav
3898
WarZone / Re: usa today gun poll
« on: January 17, 2008, 10:41:12 AM »This will be my new signature line :
"when guns and loud boats are outlawed only OUTLAWS will have them"
Then there is gonna be alot of OUTLAW'S
2sav
3899
WarZone / Re: usa today gun poll
« on: January 17, 2008, 10:35:30 AM »
Done.
Now i want to go buy another gun It is a new year!
Bastards.
2sav
Now i want to go buy another gun
It is a new year!Bastards.
2sav
3900
Cars / Automobiles For Sale / Re: 66 Bug
« on: January 16, 2008, 05:39:07 PM »That's not funny ! If Amanda sees that she will want it !
Sooooo.............. buy it for her
2sav