Propless.

 if you look real close you can make out the drivers stringer. it looks kinda "yellow" compared to the color of the balsa floors.
 



btw bad ass float liberator

 Nope, I dont see a stringer there.  There is the vertical inside wall of the tunnel, then a wood trim piece (not a stringer) then the balsa. Look at the back seat, there is no notch for a stringer and its sitting flat on top of the tunnel.

LIBERATOR681, I was just curiouse because my Daytona hull has really small stringers (1 1/2" high x 3/4").  I was told the hull design gets its strength from the vertical walls of the tunnels and the stringers are basically there just to mount things.   

  Ray, I found one for you !!!!  I know you dont have one of these.  Let me know if you want me go get it for you, I might be able to fit it in one of those USPS flat rate boxes and save you the trip to pick it up.   

http://fresno.craigslist.org/boa/1964759274.html

 I was thinking about going Sunday.      Lots of things to do around here though, not sure yet.

PM = Private message

 Look at the top of the page, just above the add space, it says "MY MESSAGES [ 1 ] ".  Click on it. 
    

 Cool stuff there GT,

 Whats your opinion on the marine oil ?   Looks like it has a better / lower number for the wear test, and somekind of anti rust additive.  http://www.amsoil.com/storefront/wcf.aspx  Looks like a nice idea, but it says nothing about zinc and phosphorus for the flat tappet cams.

 Pat, I was reading back to where you mentioned there where some cracks around where the pod met the transom.  I know you took care of that with your glass work, but have you thought about making a pump brace for it so it doesn't happen again ?  Might be worth thinking about, I know your going to have more power than the "motor" that was in there. 

  OK bro a little lost here help me out, I know you had the boat trailer lowed.. scape plates??? on a boat trailer HUH rainbow colors     this is going to be good DETAILS.    OH BTW here's how your buddy does business
  
 Quote from BoatSalvage1

!! I HAVE SOLD ONE OF THE TRAILERS !! NOW FOR THE OTHER ONE !!

TOLD YOU WOULD NOT STOP ME !!!!!!!!!! DUMB IDIOTS !!!!!!!!!!!

!!!!!!! HAHAHA, JUST TOOK A DEPOSIT ON ANOTHER ONE IDIOTS !!! YOUR LOSIING !!!!

TOLD YOU U WOULDN'T BEAT ME !!!!!!!!!!!!!!!!!!!!!!! IDIOTS (( 1TRAILER LEFT IDOITS )) HAHA BEAT YOU AGAIN !!!!!! I AM A REAL MAN THAT LIVES HIS LIFE CLEAN !!! !!!!!!!!!! DUMB IDIOTS !!!!!!!!!!!!!
MEETING A GUY RIGHT NOW IN 15 IN MENTONE TO SELL THE LAST OF THE 3 TRAILERS FOR TODAY'S SALE*** !!!!!!!!!!! HAHAHA
24 Foot Tandem, Only If I Sell Motor/Pump sounds good but has A knock - $1500 (Mentone) NO WARRANTIES!!!!! SO NO CALLING ME BACK AND SAYING ITS JUNK!!!!!!  
I CAN SELL THE TRAILER TOMORROW ( 24' TANDEM, BRAKES, TITLE ) FOR $2000.00
LOVE ALWAYS A CRAIGSLISTER WHO FOLLOWS THE RULES
I tell the Truth and Treat People Right      
Start something here Please, I am a Straight Person to Deal with in buying and Selling, and if I do something wrong by MISTAKE !  I do My very best to make it right      
I GUESS WHERE ALL IDIOTS!!!!!!! Yes I pasted and copied all this from CL    MENTONE  before he are they deleted it. Did and said all of this in a two day period just hate the fact that someone would come on here and get one of use over on a bad deal not saying he's a bad guy just giving the facts on what was posted by him. Why did I go through all this trouble HUH SCJB is like a second family to most I hang out with a good amount of the members on here and if I felt something wasn't right I say something  
 

BEWARE

 Thanks for the detective work Boost,   

  BoatSalvage1,
 Brad is right, that's just childish.  I doubt you will have any luck selling boats/parts here now.  You better stick to craigslist. 
 

 Something odd happened with the truck today.  I used it to move some firewood around at moms house, it ran great all day.  On the way home I came to a stop and it wouldnt idle.  Had to keep my foot on the gas to keep it running. Ran fine going down the road, just realy rough at idle and would die if I didnt catch it.  Went out and checked it out after it cooled down, still wouldnt idle.  Turns out the EGR was stuck partially open.    Messed with it a bit and everything went back to normal.   Do you guys thing this could be the problem, or is it just an unrelated issue ??  Maybe even when its closed its still letting some exhaust through, and messing with everything.

 Well, Looks like this is just a guy trying to make a living selling old boats and parts.  No different than Mouser, and everyone tolerates him.  I didnt go looking for the Craigs list drama, but if anyone here has any first hand issues with this guy, speak up.  Just like dealing with anyone selling used boats and parts, check stuff out before you buy.  Looks like this guy is just selling the stuff he comes across, not his personal boat, and not stuff he took off his personal boat. Theres no way he can know every issue with every boat (or part) he has.

 So (as always, and not just with this guy), its up to the buyer to know what there buying and check it out before you plop down your money.  If you dont know what to look for as far as issues with a boat, than take someone with you that does.  And listen to them if they say no.  Most of us on here have seen first hand (or in someones project thread) how a small issue can turn into a HUGE (and costly) project.  But alot of people that are selling the stuff just dont know that much about it or how much work / money it takes to fix it right.  If your looking at buying any boat (running / lake ready, or project), its up to you to know what your buying.  Dont expect someone selling a project boat (or any boat) to tell you "this boat is a pile and needs a 2 yr resto (and $ 10k) just to be ready to get on the water safely".

 And no, I dont know this guy and have never dealt with him.   

 

 Looks like decent little project at a fair price 

 http://fresno.craigslist.org/boa/1937974374.html

 Yea, anything can be fixed, but is it worth it ? 

 That "Energizer" kit probobly cost as much (or more) than the selling price of the boat.  And your still stuck with an insert style pump.  Anybody ever seen a loader for an insert style Jacuzzi YJ, with an Energizer kit ?? 

 IMO, if your looking for a boat to just cruise around and not go fast it might be worth looking at.  But if you have any thoughts of performance or going fast in the future.  Forget about that boat.  You will spend lots of money on it just getting it close (and only close) to performing like a boat with a standard Berkeley, Dominator, etc, etc pump. 

Thanks! and ditto to you....

Going to try and make real vroom vroom noises with the Southwind Monday... How can that be bad?   

 

 I dont believe you.   

I will give ya 50 bucks for the truck.  LOL!

 LOL, I should have seen that coming (the standard SoCal Jet Boats offer).