90 degree boots will look fine=keeps wires down instead of sticking up==cleaner look



i dont know what happen on those pictures =will figure it out and try again=doug

het gaw=i tried to email you some photos=it replied that 5 photos were sent=let me know if they are the right ones

with all the pounding you are going to have the way you mounted the pump will probaby pull the screws out because of not being supported in the front=as i suggested on previous post -bulkhead fittings will work well and you donot need to caulk around them and they are a solid mount against the transom=i have had ours for three years with no leaks and no moving around problems

plus an enclosed box box might be better as you donot have to worry about water getting into any connections or such and makes a cleaner looking installation

hey gaw=you are in sacramento=im in rio linda=you could come over and take a look see at set up on my boat if you like=my number is 212-4964=give a buzz if interested

i used brass bulk head fittings =you have a npt on both ends and so you can use stainless braided lines on the outside=speed shop should have the lines or maybe your local hd store=will try to get photos up soon

how about orange county street racers=nabisco=that stuff would put the show PINKS to shame=and of coarse whitter blvd=went to jail for crusing the blvd=was only 17 and it was past 10 pm curfew

nice floater and numbers

hotrod ==that was the other number that was listed with sac boat/waterworks instead of the original number that you were trying to call=the 2 numbers are for the same place

ill see if i can come up with anything

you go kid

mcmaster carr or msc

coaching high school girls basketball=just got home and our were handed to use on a platter==ouch