Null

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - farmergord

Pages: 1 ... 17 18 [19] 20 21 ... 58
451
Engine Mechanical / Electrical / Re: What exhaust hose to run?
« on: April 02, 2012, 09:54:42 PM »
I got some sitting in my shop. Its made by a silicone company called purosil in corona good shit i bought it to use on my Glencoe with tt headers. Let me know how much you need and I'll hook you up.

I'm looking for about 3 feet of 4 inch if your interested to sell I'm buying let me know with the ride to 98230

452
OK. Well lets make this simple. Is $400 shipped to 85142 acceptable to you?

 :thumbup:
check your PM's

453
the last email you sent me was your  offer of $350 including shipping  ,too low for me so then a new buyer contacted me but Ive not seen any money from anybody . I will sell them but I don't have too and I'm not desperate

454
thanks for the low ball offer but no I don't need to sell them and I'm not desperate and I'm working on a deal with someone else right now

455
Engine Mechanical / Electrical / Re: MSD or Mallory ?
« on: March 30, 2012, 01:48:52 PM »
prevents power spikes from damaging the ignition module

456
WarZone / Re: Quick jokes
« on: March 30, 2012, 10:52:19 AM »
*John O'Reilly hoisted his beer and said, "Here's
to spending the rest of me Life, between the legs
of me wife !"

That won him the top prize at the pub for the best
toast of the night !

He went home and told his wife, Mary, "I won the
prize for the Best toast of The night."

She said, "Aye, did ye now. And what was your toast?"
John said, "Here's to spending the rest of me
life, sitting in church beside me wife."

"Oh, that is very nice indeed, John!" Mary said.

The next day, Mary ran into one of John's drinking
buddies on the street Corner. The man chuckled
leeringly and said, "John won the prize the other
night at The pub with a toast about you, Mary."

She said, "Aye, he told me, and I was a bit
surprised myself. You know, he's only been in
there twice in the last four years. "Once I had to pull him by
the ears to make him come, and the other time he fell
asleep".

457
Engine Mechanical / Electrical / Re: MSD or Mallory ?
« on: March 28, 2012, 11:22:40 PM »
thanks .....i just dont wanna go cheap....cheap is cheap....MSD has a kit ....coil,ballast res,wires,and dizzy...and then they have the "ready to run" .....i guess i just have 2 make my choice

Bust
Out
Another
Thousand...................

I put an msd ready to run on my boat last summer and so far I love it

458
Lower River / Re: mamorial weekend
« on: March 28, 2012, 11:17:55 PM »
pics or it never happened  O0

459
bump

460
The No Wake Zone / Re: GOPRO Video Editing
« on: March 26, 2012, 10:02:10 PM »
I'm just starting out and I have been using windows moviemaker as well. it's easy to use and the results are good

461
The No Wake Zone / Re: Too proud for words...
« on: March 25, 2012, 10:11:14 PM »
Congrats to her Glenn its nice when your kids make you proud of them  :thumbup:

462
Events / Re: 2012 SCJB Season Kick Off @ Bluewater March 23-25
« on: March 25, 2012, 10:07:06 PM »
CompJet races at Bluewater April 14-15
May SCJB event is TBD.
...and the annual SCJB Fathers Day gathering is June 15-17 at Big River.

don't forget Townings 22nd Gords trip south @ big River  August 24 ,25,26

463
Events / Re: 2012 SCJB Season Kick Off @ Bluewater March 23-25
« on: March 24, 2012, 07:44:30 AM »
man your up early or havn't been to bed yet.hope you guys have an awesome weekend   :beer:

464
Projects / Re: my first project 73 kona
« on: March 22, 2012, 10:19:35 PM »
thats odd on the bill of sale from Summitt its listed as 750 thats where I took my info from

465
Trailers / Re: Trailer repair
« on: March 22, 2012, 12:41:02 PM »
even with fluxcore it will still be hard to get a good weld .make sure you have a 20 amp plug to plug into with nothing else on that circuit and clean clean clean before you start. the wire size info and setting is in the inside of the door you lift up to put the wire in

466
The No Wake Zone / Re: Bahner Emblems
« on: March 22, 2012, 12:38:23 PM »

467
Trailers / Re: Trailer repair
« on: March 22, 2012, 12:32:53 PM »
yeah Ive heard that before .all I can tell you is from my experience with the same welder and having made the same kinds of welds I dont't think it's operator error I think the welder is too small or your voltage is too low ie. using it on a 15 amp plug

468
Trailers / Re: Trailer repair
« on: March 22, 2012, 12:08:37 PM »
is it a weldpac 135 because thats what mine is and it will only weld 1/4 inch with flux core wire

469
Trailers / Re: Wheel bearing grease
« on: March 22, 2012, 12:04:45 PM »
be careful of overgreasing if you have brakes.its easy to force grease out the back past the seal then when you drive it gets all over everything and ruins the brake pads

470
Projects / Re: my first project 73 kona
« on: March 22, 2012, 12:02:36 PM »
congrats on getting it running glad it wasn't the carb  >:D

471
The No Wake Zone / Re: Bahner Emblems
« on: March 22, 2012, 11:56:21 AM »
poverty jet on this site reproduces all emblems

472
Trailers / Re: Trailer repair
« on: March 22, 2012, 11:55:36 AM »
Im think your problem is too heavey a material for your 110v welder .it doesnt seem like your getting penetration just piling the weld up on the surface.My 110v welder does the same thing on 1/4 inch steel so I stick weld the bis stuff with 7018 low hydrogen and that does the trick. I don't think it will matter what tecnique you try your welder is not designed for the job especially if you dont have it plugged into a 20 amp dedicated plug

473
Boat Racing / Re: comp jet racing at puddingstone this weekend
« on: March 22, 2012, 07:58:07 AM »
I think I saw $12.00 per day plus $10.00 to park

474
not quite Mark got to put together the jet first but I've been building a tandem axle box trailer and need to finish that before the boat goes in the shop besides boating season  is 3 months away at least  :(

475
TTT

Pages: 1 ... 17 18 [19] 20 21 ... 58

Null

SMFPacks CMS 1.0.3 © 2026