476
Test / Re: attachment test
« on: November 16, 2013, 09:31:18 AM »
.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
477
Miscellaneous / Spam / Re: Custom Sand Car stroller
« on: November 15, 2013, 02:54:39 PM »
I have a pair of electric wheel chair motors you should put on that thing.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
478
Projects / Re: Ferrari/lambo power
« on: November 15, 2013, 12:51:28 PM »
And the segment continues, we will be back after a short break and continue this discussion on " what spins your impeller"
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
479
Projects / Re: Ferrari/lambo power
« on: November 15, 2013, 09:16:22 AM »
Music to the gods huh, well you better be praying to the gods when that pump explodes at those high rpms.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
480
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: November 15, 2013, 08:28:47 AM »
I was raised to never use the 4 letter 4 word. Even till this day if I udder the word ford I have to make sure my parents aren't within arms reach.....lol
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
481
Engine Mechanical / Electrical / Re: too much water in the headers?
« on: November 15, 2013, 06:59:39 AM »
There should be two valve one on the pump and one on the dump. The one on the dump is to provide alittle back pressure so it pushes the ball and spring on the header t to give the headers some water. There's a diagram on the Bassett site and Jet boat performance website.
The valve on the pump is to adjust the flow to the motor which in turn adjust motor temp. And the one on the on dump like I mentioned earlies to to control the flow i the headers
Sent from my iPhone using SoCalJetBoats
The valve on the pump is to adjust the flow to the motor which in turn adjust motor temp. And the one on the on dump like I mentioned earlies to to control the flow i the headers
Sent from my iPhone using SoCalJetBoats
482
Projects / Re: 1975 DiMarco Circle Boat Project "SoCalJetBoats Exclusive"
« on: November 14, 2013, 09:45:41 PM »
Looks sweet, I really like it when the scoop is mounted low to the point it's almost sitting on the intake. Hides a lot of the ugly and well let's be honest ferds is some ugly motors. Move it far enough forward so you can hide the distributor and mount it as low as possible. And then when you want to sell it let me know so I can come get it.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
483
Engine Mechanical / Electrical / Re: Chevy 350 flat at full throttle
« on: November 14, 2013, 03:53:36 PM »
Ditch it for a Holley. So much easier to rebuild and clean.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
484
Engines / Engine Parts For Sale / Re: Tunnel ram for trade
« on: November 14, 2013, 10:00:27 AM »
No they do run like crap lol. But some people do funny stuff. I'll see what I have in the garage. I think I have a square port torquer manifold laying around
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
485
Engines / Engine Parts For Sale / Re: Tunnel ram for trade
« on: November 14, 2013, 09:19:47 AM »
Do you need a rectangle port manifold or a oval. Sounds like a dumb question but I personally know a few guys that run rectangle intakes on oval port heads
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
486
Engine Mechanical / Electrical / Re: Chevy 350 flat at full throttle
« on: November 13, 2013, 10:46:13 PM »
What carb you tuning, had the same issue. Turned out my secondary's circuits were clogged with crap.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
487
Engines / Engine Parts For Sale / Re: Tunnel ram for trade
« on: November 13, 2013, 10:30:09 PM »
Whats your cash price
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
488
The No Wake Zone / Re: Who wants to barter?
« on: November 13, 2013, 02:45:03 PM »
I'm confused lol
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
489
The No Wake Zone / Re: Boat Covers??
« on: November 13, 2013, 02:44:23 PM »
I have seen deals lately for 15x30's for like 2k and it's a steel tube skeleton with tin panels secured to it. Just gotta keep your eyes open and look around.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
490
The No Wake Zone / Re: Posting Pics
« on: November 13, 2013, 01:45:42 PM »
As many forums as I'm a member of which a few to name are, powerstrokearmy, thedieselstop, chevelleforum, coloradok5, pwc today, xh20, pb, jbpforum, trx450r and theres a few more. But of all of them this is the most user friendly site I have ever been a member on and is my most visited/participated forum. I have half the issues with this site compared to the others.
As far as posting pictures I have never had a problem on my desktop and one once dent where my phone wouldn't post anything at all but it was an easy fix, reinstall and it was all good. The only learning curve with the app is you have to wait 15-20 seconds after the first picture to post your reply/ thread or add another picture.
But IMO this is thee best forum I have had the privelage of being a member on. A lot of great guys and help is avaiable to anyone who asks usually for the price of a few beers and good company. I can honestly say I have no complaints givin the current rise of other member issues and I be believe a big thanks to brad is in order.
Great site man and thanks.
Sent from my iPhone using SoCalJetBoats
As far as posting pictures I have never had a problem on my desktop and one once dent where my phone wouldn't post anything at all but it was an easy fix, reinstall and it was all good. The only learning curve with the app is you have to wait 15-20 seconds after the first picture to post your reply/ thread or add another picture.
But IMO this is thee best forum I have had the privelage of being a member on. A lot of great guys and help is avaiable to anyone who asks usually for the price of a few beers and good company. I can honestly say I have no complaints givin the current rise of other member issues and I be believe a big thanks to brad is in order.
Great site man and thanks.
Sent from my iPhone using SoCalJetBoats
491
The No Wake Zone / Re: Boat Covers??
« on: November 13, 2013, 11:57:20 AM »
For the cost of a good boat cover you could buy a tin garage. And it will last much longer
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
492
Cars / Automobiles For Sale / Re: 1988 CHEVY SUBURBAN
« on: November 12, 2013, 02:37:23 PM »
2wd or 4x4
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
493
Random Boat Parts For Sale / Re: Some stuff for sale
« on: November 11, 2013, 08:55:58 AM »
Bump
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
494
Engine Mechanical / Electrical / Re: big block versus small block
« on: November 10, 2013, 07:54:37 PM »
That boat has an AA, that came straight from Bob Fry's mouth... It is a Mike Declark AA impeller detailed by Greg Shoemaker. Not my first rodeo my man...
GT
I thought we were talking turbo motors not horse crap?
Sent from my iPhone using SoCalJetBoats
495
Engine Mechanical / Electrical / Re: big block versus small block
« on: November 10, 2013, 04:01:00 PM »
If we were talking variable torque, the turbo deal would be a monster..... IMHO you are safer with big cubic inches and lower crankshaft speeds...
I doubt this will be challenged.... SocalPSD....
GT
Ahh my friend I do believe the thing your forgetting is..........VGT, variable geometry turbo. With alittle tuning my old 6.0 powerstroke made full boost at 1600 rpms with little to no load and I could of dropped it to an even lower rpm. Some tuning and bam. Virtually no lag and the benefit of adjustable boost without swapping pullys like a supercharger or impellers and housings like regular turbos.
BOOM! That's right. I did it.
Although the arguement I really don't care for forced induction. I'm more of a n/a guy.
Sent from my iPhone using SoCalJetBoats
496
Random Boat Parts For Sale / Re: Cleaning up the garage and random parts
« on: November 09, 2013, 09:09:00 AM »
No only one
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
497
Random Boat Parts For Sale / Re: Cleaning up the garage and random parts
« on: November 08, 2013, 11:53:43 PM »
Tomorrow works. Shoot me a text 9515440346 and I'll give you a call back when I wake up. I have been at the hospital for the last 10 hours and chances are I'll be sleeping in.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
498
Trailers / Re: Replacement steel fenders and steps
« on: November 08, 2013, 09:15:17 PM »Thank you GlassCutter and uncleBOBBY. Damnit, this is America! Boat trailer fenders should be for sale already chromed! You should be able to buy vintage style jet boat seats on-line already built! And last but not least, I want to work a 40 hour week and have enough to buy a house, have a new car, and my wife not work. Sorry, I have been daydreaming too much.
It's doable, but forget the new car part of it lol.
Sent from my iPhone using SoCalJetBoats
499
Random Boat Parts For Sale / Re: Cleaning up the garage and random parts
« on: November 08, 2013, 09:13:41 PM »
Yah I still have them both.
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats
500
Sand / Re: Glamis bound
« on: November 08, 2013, 01:16:56 PM »
I may be there this weekend. I'll be down on pad 10 area. Can't miss me in the group I'm in. 8-9 red bikes and I'm the only black bike
Sent from my iPhone using SoCalJetBoats
Sent from my iPhone using SoCalJetBoats