Nice im launching outa la laguna around 930-10 and gonna be in the cove most of the day.

Sent from my SCH-I545 using SoCalJetBoats mobile app

thanks bro now it's your turn


Sent from my iPhone using SoCalJetBoats

Ya kinda hoping the dana dont sell so i can keep it. Haha.

Sent from my SCH-I545 using SoCalJetBoats mobile app

I am selling my 1993 Dana Arrow. It is an open bow and all upholstery, wood and carpet was just redone at the beginning of summer. The motor is a big block chevy 454 with holley 750 double pumper and has a berkley jet drive with hydraulic jetovator. Registration is current on boat thru 2015. This boat is a perfect river or lake boat. Selling to buy my first house. I am asking $10,000 please feel free to call or txt me with any questions 714-501-0555 Michael.

Sent from my SCH-I545 using SoCalJetBoats mobile app

you got a picot the motor set up your runnin?


Sent from my iPhone using SoCalJetBoats

 

If you can txt me 714-5010555

Sent from my SCH-I545 using SoCalJetBoats mobile app

What fuel pump is on it I believe you said electric and you did say your pressure was at 5.5-6 is that about right


Sent from my iPhone using SoCalJetBoats

Ya electric fuel pump at around 6

Sent from my SCH-I545 using SoCalJetBoats mobile app

Your boat and interior look awesome!
Nothing drives me crazier than seeing a million colors on upholstery.
Then the guy tries to sell it, and all I can think is "who the fock is buy that!?
Good job dude, keep kicking ass.

-beerjet-

 


Basically stock indamar 454 big block.

Sent from my SCH-I545 using SoCalJetBoats mobile app

I could be way wrong with this. Are your floats set too high, air fuel set properly, do you have a pressure regulator? What do your plugs look like? Jetting from what I gathered all depends on your set up.  If your boat ran fine with the 77's and plugs were good. I'd stick with the 77's

The original carb was a 650 vacuum secondary with 86 jets and that I replaced that with a carb I had in the garage which was a 750 double pumper I'm down to 62 primary jets and 63 secondaries it's running better on the trailer need to take it to elsinore Sunday and get it all solved


Sent from my iPhone using SoCalJetBoats

bad luck continues. when I went to put the carb back on i cracked the throttle plate  so now i have to wait untill the new one comes in

whats your fuel pressure at and what fuel pump do you have? I had the same issue with mine and it turned out to be my fuel pump


Sent from my iPhone using SoCalJetBoats

fuel pressure is 5.5-6 psi and i have an electric fuel pump rated and 4-7 psi.

So I'm out here and it's doing the same thing but not when it hits a wake it just cuts out and does any suggestions txt me 714-501-0555 thank you


Sent from my iPhone using SoCalJetBoats

I think i found the problem, loose terminal on back of ignition  But wont know for sure until sat when i take it to lake elsinore anyone else going to be out on the lake.

Just saw this thread also great job on your Dana it looks bitchin as far as the cutting out goes not too sure did you change the coil wire when you put the new one on? Not 100% sure that would do it but makes sense in my head ya know! You should drag it out Sunday to elsi with us maybe trouble shoot it there too.


Sent from my iPhone using SoCalJetBoats

I will see if i can make it out this weekend. Also i just ordered a cap and rotor, plugs and wires and found a "loose" comection (hand tight) on the ignition key ground so maybe that was it Doubtful but we will see.