Just talk to him to get some more info he says the boat is the real deal a real runner and dialed in boat runs close to the 130 MPH I had no idea that it was setup to run that hard  good luck with the sale.

All want is 90mph before the end of this year. 

Im looking for a set of BBC Bassett shorty headers. I have a set of twisties that were rechromed last year, also the lines were replaced last year. I don't mind trading or buying them used from someone who might have extras laying around. If your looking to trade, I have plenty of things to work out with. 

Sure, how much? Extra scoops are always handy.

Hey Danny, nice to meet you guys. You guys are more than welcome to my house in Yuma, if you guys need anything. Can you PM the photo's you took of my slow ride? 

big difference from this at 60mph turning 4500 rpm's.

i'll catch up with your boat next year. 

nice video too. you guys coming to the power tour right?

i'll be leaving tomorrow morning!! 

I made one out of 3 in pvc pipe, 2 caps ,drilled to fit a breather and one for the hose. Painted it looks good and works well.

show us some pics..

Got me scared at first with the 18" (inch) BBC Boat. You have a Southwind Hull. How much for the motor?

Ebay or Craiglist speeds were used. Anything is possible, but that's a steep increase in speed.

I used epoxy paint when I did mine. Call me up if you need help. I'm off the rest of the month, so I have nothing but time. I have a few before and after pics posted up here.

hey marc, I have a question for you. I went out today for some testing and kept on woundering why I kept hitting 4500 and it wouldn't budge anymore. I pull up to the shore and check the carb. I disconnected the cable and pulled the cable bracket on the carb, and it's maxxed out, not allowing it to go anymore. The carb is a 4150 double pumper 750 cfm Holley. It hasn't been rebuilt in the three years that I've had it, so I'm thinking I either need to or get a better carb. I have a pretty much stock 454 with a 282 crane cam and flat top pistons.


What adjustments do I need to do to open it up more.  Thx

It's been awhile since I posted here. I picked this up a few months back and just doing a little work here and there. Pretty much stock 454 with a berkeley pump. I took it to Vic's shop last night for a bit of impeller shaving.