51
Trailers / Re: I need a new axel please
« on: July 27, 2015, 12:49:51 AM »
I second redneck trailer supply.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
52
Engine Mechanical / Electrical / Re: Rewiring...looking for ideas
« on: July 25, 2015, 11:54:24 AM »
Very clean. I like that.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
53
Engine Mechanical / Electrical / Re: Rewiring...looking for ideas
« on: July 24, 2015, 02:14:32 PM »
Nice. Thanks Steve. That's kind of what I was thinking about doing.
You have every wore going through a fuse?
Sent from my iPhone using SoCal Jet Boats
You have every wore going through a fuse?
Sent from my iPhone using SoCal Jet Boats
54
Engine Mechanical / Electrical / Re: Rewiring...looking for ideas
« on: July 24, 2015, 11:11:41 AM »
Good info everyone. Thanks
Steve where did you mount the fuse block in the rear?
Sent from my iPhone using SoCal Jet Boats
Steve where did you mount the fuse block in the rear?
Sent from my iPhone using SoCal Jet Boats
55
Engine Mechanical / Electrical / Re: Rewiring...looking for ideas
« on: July 24, 2015, 09:49:24 AM »
Lol. That's what I meant. Upgrade my alternator. Is it one of those one wire alternators?
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
56
Engine Mechanical / Electrical / Re: Rewiring...looking for ideas
« on: July 24, 2015, 09:32:46 AM »
yeah! If i can remove the terminal block and replace with plug(s) thats way better. If you have pictures and/or a source I'd appreciate it. I can upgrade and relocate that battery switch.
I can also upgrade my ignition and get rid of the voltage regulator correct?
I can also upgrade my ignition and get rid of the voltage regulator correct?
57
Engine Mechanical / Electrical / Rewiring...looking for ideas
« on: July 24, 2015, 08:43:27 AM »
Gonna be rewiring the hallett in the next few months. Starting the planning stages and wanted to see if anyone has or has seen any different ideas for mounting the terminal block. We have all seen them off the back of the motor, but I was wondering if there is a better location since I'm going to rewire.
Currently I have this aluminum plate mounted to the back of the motor and underneath is the volt regulator, battery switch, and terminal block. I'd like to relocate for a couple reasons, mostly because it's ugly and I like the way the boat looks without this big plate (see pic).
The boats a 76 hallett bubbledeck 460 berk JC.
Sent from my iPhone using SoCal Jet Boats
Currently I have this aluminum plate mounted to the back of the motor and underneath is the volt regulator, battery switch, and terminal block. I'd like to relocate for a couple reasons, mostly because it's ugly and I like the way the boat looks without this big plate (see pic).
The boats a 76 hallett bubbledeck 460 berk JC.
Sent from my iPhone using SoCal Jet Boats
58
The No Wake Zone / Re: Kids riding in boat
« on: July 21, 2015, 02:06:37 PM »
My boys (4 and 6) love the boat. Always wear vests and now wear their swim goggles so they can keep their eyes open while underway. I've always taught them that they never touch the motor or pipes no matter what. Not even when the boat has been in the garage for a month. They like playing in it when I'm working on it. At first they thought it was loud but don't even mention it anymore.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
59
Engine Mechanical / Electrical / Re: Scoop
« on: July 20, 2015, 06:35:22 PM »
Try J&M speed center in riverside. They prob don't stock it, but can maybe get it sooner than summit.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
60
The No Wake Zone / You've been warned.
« on: July 20, 2015, 06:30:28 PM »
I ordered two. At least I think I did.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
61
Miscellaneous / Spam / Re: Sand spikee
« on: July 19, 2015, 06:35:59 PM »
I'll take one or two if you are making more. PM. Me and let me know.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
62
SoCal Lakes / Re: Boat quarantine in Cali
« on: July 18, 2015, 12:18:26 PM »
Yeah. But it was only a week and I didn't have a trip planned. Didn't wanna risk it.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
63
SoCal Lakes / Re: Boat quarantine in Cali
« on: July 17, 2015, 07:32:06 PM »
Update on my situation...I called this morning and they told me to remove the cable and Mail the tag back to them.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
64
SoCal Lakes / Re: Boat quarantine in Cali
« on: July 15, 2015, 11:33:06 PM »
My boat is under "quarantine" right now. They found a mussel on my anchor the size of pin head (I didn't see it). 30 minutes at Vidal doing paperwork and then they put a cable through the bow eyelet and the trailer with a special seal on it so I can't launch the boat. They let me go and told me to call a number. I called the guy and he told me a minimum 1 week quarantine and to "take everything out of my boat and let it air out"... I call back Friday to find out what happens next.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
65
Boats For Sale / Re: 1974 19ft Hallett bubbledeck w/454 BBC for sale....cheap
« on: July 15, 2015, 06:10:09 PM »
Is this thing still available?
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
66
Hulls / Re: Access hole under dash
« on: July 10, 2015, 07:54:14 PM »
Yeah. Bow support. Not a huge hole. Just enough to put a few life jackets in. I
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
67
Hulls / Access hole under dash
« on: July 10, 2015, 07:20:56 PM »
Would it be completely horrible if I cut a small access hole under the dash to allow storage of life jackets? Other boats I've had and friends boats have them, but I wasn't sure if the hole boat would fall apart or not. I'm gonna be doing the carpet soon.
19' 76 hallett bubble deck
Sent from my iPhone using SoCal Jet Boats
19' 76 hallett bubble deck
Sent from my iPhone using SoCal Jet Boats
68
The Parker Strip / Re: Parker this weekend
« on: July 08, 2015, 09:46:55 PM »
I'm at Echo lodge until Friday. Look for a 76 hallet👍🏻
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
69
WTB / GIL ski holder
« on: July 02, 2015, 03:20:33 PM »
Looking to get the second half to these brackets. If you have them laying around let me know. I'm in so cal (IE)
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
70
Engine Mechanical / Electrical / Re: oil pressure sending unit
« on: April 25, 2015, 03:55:07 PM »
I always say a 76 Ford F-350.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
71
WarZone / Re: New boat
« on: April 15, 2015, 04:54:49 PM »
Nice float. Is the Chevy original to it?
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
72
Engine Mechanical / Electrical / Re: Voltage Regulator Wiring - Ford 460
« on: March 30, 2015, 08:47:40 PM »
Just wanted to update the thread for any future references...
Ended up hooking the alt field to the F on VR, alt stator wire to S on VR, alt battery wire to the starter solenoid, and the "I" terminal on the VR to the 12v side of the coil resistors.
The system is over charging with the old VR (broke), the new VR shows no charging. So it's either not charging cuz the batt is already charged or Something is is up.
Sent from my iPhone using SoCal Jet Boats
Ended up hooking the alt field to the F on VR, alt stator wire to S on VR, alt battery wire to the starter solenoid, and the "I" terminal on the VR to the 12v side of the coil resistors.
The system is over charging with the old VR (broke), the new VR shows no charging. So it's either not charging cuz the batt is already charged or Something is is up.
Sent from my iPhone using SoCal Jet Boats
73
Engine Mechanical / Electrical / Re: Voltage Regulator Wiring - Ford 460
« on: March 29, 2015, 04:52:00 PM »
Thanks GT. I'm gonna try a couple options and see if I can get it to charge.
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats
74
Engine Mechanical / Electrical / Re: Voltage Regulator Wiring - Ford 460
« on: March 29, 2015, 04:31:21 PM »
I think understand how it works. It tells the alternator when to start charging the system.
The instructions with the VR just said "connect wires back together" and the schematics online show numerous different ways. I just wanna hook it up right. I assume the F wire connects to the F terminal on the VR. And the battery wire from the alternator should connect to the starter solenoid or the positive on the battery. The Stator wire either it connects to the stator terminal on the VR or to nothing as I've seen online. As for the "I" (ignition) on the VR. That's where the information gets conflicting.
The VR needs to be able to read what the electrical system is at so does the VR I terminal hook up to a 12v source?
Any help would be appreciated.
Sent from my iPhone using SoCal Jet Boats
The instructions with the VR just said "connect wires back together" and the schematics online show numerous different ways. I just wanna hook it up right. I assume the F wire connects to the F terminal on the VR. And the battery wire from the alternator should connect to the starter solenoid or the positive on the battery. The Stator wire either it connects to the stator terminal on the VR or to nothing as I've seen online. As for the "I" (ignition) on the VR. That's where the information gets conflicting.
The VR needs to be able to read what the electrical system is at so does the VR I terminal hook up to a 12v source?
Any help would be appreciated.
Sent from my iPhone using SoCal Jet Boats
75
Engine Mechanical / Electrical / Re: Voltage Regulator Wiring - Ford 460
« on: March 29, 2015, 12:45:32 PM »
Here's the VR
Sent from my iPhone using SoCal Jet Boats
Sent from my iPhone using SoCal Jet Boats